Black And Decker Matrix BDCMTR Handleiding

Black And Decker Multitool Matrix BDCMTR

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker Matrix BDCMTR (24 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

INSTRUCTION MANUAL

ROUTER

ATTACHMENT

Thank you for choosing BLACK+ ! DECKER

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+ DECKER

purchase, go to http://www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.

Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPA OL EN LA CONTRAPORTADA.N

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

CATALOG NUMBER

BDCMTR

To register your new product, visit

www.BlackandDecker.com/NewOwner

WARNING:

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

WARNING: Read all safety warnings and all instructions provided with

your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using

this attachment. Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

SPECIFIC SAFETY RULES

• Hold power tool by insulated gripping surfaces, because the cutter may contact its own cord.

Cutting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.

• Use clamps or another practical way to secure and support the workpiece to a stable platform.

Holding the work by your hand or against the body leaves it unstable and may lead to loss of control.

• Thiswillenablebettercontrolofthetool.Keep handles dry, clean, and free from oil and grease.

• Keep hands away from cutting area. Never reach under the workpiece for any reason.

Keep the router base rmly in contact with the workpiece when cutting. Hold the router

only by identied gripping surfaces as identied in this manual (see Using the Router).

Theseprecautionswillreducetheriskofpersonalinjury.

Kickback is a sudden reaction to a pinched, bound or misaligned router bit, causing an

uncontrolled router to lift up and out of the workpiece toward the operator.

• Keep your body positioned parallel to the direction of the cut, not behind the direction

of the cut.KICKBACK could cause the router to jump opposite the direction of the cut.

• Dullcuttersmaycausetheroutertoswerveorstallunderpressure.Use sharp cutters.

• Itmaybeextremelyhot.Never touch the bit immediately after use.

• IftheBe sure that the motor has stopped completely before you lay the router down.

cutterheadisstillspinningwhenthetoolislaiddown,itcouldcauseinjuryordamage.

• IfthebitisincontactBe sure that the router bit is clear of the workpiece before starting the motor.

withtheworkpiecewhenthemotorstartsitcouldmaketherouterjump,causingdamageorinjury.

• Only use router bits with a shank diameter of 1/4”.

• Only use router bits rated at least equal to the maximum speed marked on the tool.

• UseoflargerthanDo not use router bits with a diameter greater than 1-3/8” (35mm).

recommendedbitscanresultinahazard.

• Not intended to be used with a router table. Do not use the tool in an inverted position.

• Do not attempt to use the tool in a stationary mode.

• Make sure collet nut is securely tightened to prevent router bit from slipping during use.

WARNING:ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also

use face or dust mask if drilling operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

•ANSI Z87.1 eye protection (CAN/CPA Z94.3),

•ANSI S12.6 (S3.19) hearing protection,

•NOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to the state of California to cause

cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

 • crystalline silica from bricks and cement and other masonry products, and

 • arsenic and chromium from chemically-treated lumber.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates 

Maybeusedinconjunctionwithothersymbolsorpictographs.

DANGER: Indicateshazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.

WARNING: Indicateshazardoussituationwhich,ifnotavoided,couldresultindeathor

seriousinjury.

CAUTION: Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminoror

moderateinjuryorpropertydamage.

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are specially designed to lter out

microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and

other construction activities. Wear protective clothing and wash exposed areas with

soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote

absorption of harmful chemicals.

WARNING:Use of this tool can generate and/or disperse dust, which may cause

serious and permanent respiratory or other injury. Always use NOSH/OSHA approved

respiratory protection appropriate for the dust exposure. Direct particles away from face and

body. Always operate tool in well-ventilated area and provide for proper dust removal. Use dust

collection system wherever possible.

WARNING: ALWAYS wear proper personal hearing protection that conforms to

ANSI S12.6 (S3.19) during use.Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

SYMBOLS

Thelabelonyourtoolmayincludethefollowingsymbols.Thesymbolsandtheirdefinitionsare

asfollows:

V amperes .................volts A .................

Hz watts ............... hertz W .................

min minutes ............. or AC ...... alternating current

or DC direct current .. no ................ no load speed

...............Class I Construction earthing terminal ................

(grounded) safety alert symbol ................

................Class II Construction .../min or rpm.....revolutions or reciprocation

(double insulated) per minute

...............Read instruction manual before use

................ Use proper respiratory protection

...............Use proper eye protection Use proper hearing protection ................

Whenusinganextensioncord,besureto

useoneheavyenoughtocarrythecurrent

yourproductwilldraw.Anundersizedcord

willcauseadropinlinevoltageresulting

inlossofpowerandoverheating.The

followingtableshowsthecorrectsizetouse

dependingoncordlengthandnameplate

ampererating.Ifindoubt,usethenext

heaviergage.Thesmallerthegagenumber,

theheavierthecord.

SAVE THESE INSTRUCTIONS

Minimum Gauge for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

  (0-7,6m)(7,6-15,2m)(15,2-30,4m)(30,4-45,7m)

240V 0-50 51-100 101-200 201-300

(0-15,2m)(15,2-30,4m)(30,4-60,9m)(60,9-91,4m)

Ampere Rating

More Notmore AmericanWireGauge

Than Than

0 - 6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 NotRecommended

Functional Description

Figure A

1.Routerattachment

2.Spindlelockbutton

3.Activelock-offbutton

4.NutandCollet

5.Depthstopbar

6.Depthofcutscale

7.Chipshield

8.Base

Notshown:

Wrench

Product specificaties

Merk:	Black And Decker
Categorie:	Multitool
Model:	Matrix BDCMTR

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker Matrix BDCMTR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Multitool Black And Decker

Black And Decker MT18 Handleiding

5 Juni 2023

Black And Decker MTOS4 Handleiding

14 Mei 2023

Black And Decker BDCOS18 Handleiding

12 Mei 2023

Black And Decker MT280 Handleiding

22 April 2023

Black And Decker MT1435 Handleiding

19 April 2023

Black And Decker HPL108 Handleiding

10 April 2023

Black And Decker MT300SA2 Handleiding

5 April 2023

Black And Decker KA280 Handleiding

28 Maart 2023

Black And Decker MT300KA Handleiding

24 Maart 2023

Black And Decker BDCMTO Handleiding

23 Maart 2023

Handleiding Multitool

Nieuwste handleidingen voor Multitool

Powerblade PC4MT5 Handleiding

10 December 2024

EGO PH1420E Handleiding

8 December 2024

Einhell TE-MG 200 E Handleiding

4 December 2024

Alpha Tools A 180 Handleiding

17 November 2024

EGO MRC2306E Handleiding

17 November 2024

Workzone WZMS 10,8 Li Handleiding

14 November 2024

Vonroc OT505DC Handleiding

20 Oktober 2024

Ozito PXPPHTK-258 Handleiding

23 Augustus 2024

Ozito PXGMTK-2536 Handleiding

30 Juli 2024

Einhell BT-MG 180/1 Handleiding

10 Juli 2024