Black And Decker BDCMTO Handleiding

Black And Decker Multitool BDCMTO

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker BDCMTO (28 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
INSTRUCTION MANUAL
OSCILLATING TOOL
ATTACHMENT
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBERS
BDCMTO,
BDCMTOA
To register your new product, visit
www.BlackandDecker.com/NewOwner
2
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
WARNING: Read all safety warnings and all instructions provided with
your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using
this attachment. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to secure and support theworkpiece to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Disconnect power before using tool near live wires or where there may be hidden wiring.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.” Always check for hidden wiring, gas
lines, or other utilities before performing any material cutting or removal operations with the tool.
• .Wait for the cutter to stop before setting the tool down An exposed cutter may engage
the surface leading to possible loss of control and serious injury.
• Do not operate this tool for long periods of time. Vibration caused by the operating action
of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide
extra cushion, take frequent rest periods, and limit daily time of use.
• Always hold the tool rmly with both hands for maximum control. Keep proper footing and
balance at all times. This enables better control of the power tool in unexpected situations.
• Do not restart the cutting operation in the workpiece. Let the tool reach full speed and
carefully re-enter the cut.
• Do not “jam” the cut-off saw blade or apply excessive pressure. Do not attempt to make
an excessive depth of cut.
• Keep your hands away from cutting area. Do not reach under the material being cut.
• Do not use dull or damaged blades. Bent blade can break easily or cause kickback.
Exercise extreme caution when handling the accessories. The accessories are very sharp.
Wear protective gloves when changing cutting accessories. Accessories become hot after
prolonged usage.
• Before scraping, check workpiece for nails. If there are nails, either remove them or set
them well below intended finished surface. Striking a nail with accessory edge could cause
the tool to jump.
• Do not wet sand with this tool. Liquids entering the motor housing are an electrical shock hazard.
• Never work in area which is soaked with a liquid, such as a solvent or water, or
dampened such as newly applied wallpaper. There is an electrical shock hazard when
working in such conditions with a power tool and heating of the liquid caused by scraping
action may cause harmful vapors to be emitted from workpiece.
• Do not use sandpaper intended for larger sanding pads. Larger sandpaper will extend
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates 
Maybeusedinconjunctionwithothersymbolsorpictographs.
DANGER: Indicateshazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.
WARNING: Indicateshazardoussituationwhich,ifnotavoided,couldresultindeathor
seriousinjury.
CAUTION: Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminoror
moderateinjuryorpropertydamage.
3
beyond the sanding pad causing snagging, tearing of the paper or kick-back. Extra paper
extending beyond the sanding pad can also cause serious lacerations.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses.
Also use face or dust mask. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CPA Z94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NOSH/OSHA respiratory protection.
WARNING:Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the state of California to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paints,
 •
crystalline silica from bricks and cement and other masonry products, and
 •
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to lter out microscopic particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
WARNING:Use of this tool can generate and/or disperse dust, which may cause serious
and permanent respiratory or other injury. Always use NOSH/OSHA approved respiratory
protection appropriate for the dust exposure. Direct particles away from face and body.
WARNING:Always wear proper personal hearing protection that conforms to ANSI
S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
PRECAUTIONS TO TAKE WHEN SANDING PAINT
 1.SandingofleadbasedpaintisNOTRECOMMENDEDduetothedifficultyofcontrollingthe
 contaminateddust.Thegreatestdangerofleadpoisoningistochildrenandpregnantwomen.
 2.Sinceitisdifficulttoidentifywhetherornotapaintcontainsleadwithoutachemical
 analysis,werecommendthefollowingprecautionswhensandinganypaint:
PERSONAL SAFETY
 1.Nochildrenorpregnantwomenshouldentertheworkareawherethepaintsandingis
beingdoneuntilallcleanupiscompleted.
 2.Adustmaskorrespiratorshouldbewornbyallpersonsenteringtheworkarea.Thefilter
shouldbereplaceddailyorwheneverthewearerhasdifficultybreathing.Seeyourlocal
hardwarestorefortheproperN.I.O.S.H.approveddustmask.
 3.NOEATING,DRINKINGorSMOKINGshouldbedoneintheworkareatoprevent
ingestingcontaminatedpaintparticles.WorkersshouldwashandcleanupBEFORE
eating,drinkingorsmoking.Articlesoffood,drink,orsmokingshouldnotbeleftinthe
workareawheredustwouldsettleonthem.
ENVIRONMENTAL SAFETY
 1.Paintshouldberemovedinsuchamannerastominimizetheamountofdustgenerated.
 2.Areaswherepaintremovalisoccurringshouldbesealedwithplasticsheetingof4milsthickness.
 3.Sandingshouldbedoneinamannertoreducetrackingofpaintdustoutsidetheworkarea.
CLEANING AND DISPOSAL
 1.Allsurfacesintheworkareashouldbevacuumedandthoroughlycleaneddailyforthe
durationofthesandingproject.Vacuumfilterbagsshouldbechangedfrequently.
 2.Plasticdropclothsshouldbegatheredupanddisposedofalongwithanydustchipsor
otherremovaldebris.Theyshouldbeplacedinsealedrefusereceptaclesanddisposedof
throughregulartrashpick-upprocedures.Duringcleanup,childrenandpregnantwomen
shouldbekeptawayfromtheimmediateworkarea.
 3.Alltoys,washablefurnitureandutensilsusedbychildrenshouldbewashedthoroughly
beforebeingusedagain.

Product specificaties

Merk: Black And Decker
Categorie: Multitool
Model: BDCMTO

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker BDCMTO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Multitool Black And Decker

Black And Decker

Black And Decker MT18 Handleiding

5 Juni 2023
Black And Decker

Black And Decker MTOS4 Handleiding

14 Mei 2023
Black And Decker

Black And Decker BDCOS18 Handleiding

12 Mei 2023
Black And Decker

Black And Decker MT280 Handleiding

22 April 2023
Black And Decker

Black And Decker MT1435 Handleiding

19 April 2023
Black And Decker

Black And Decker HPL108 Handleiding

10 April 2023
Black And Decker

Black And Decker MT300SA2 Handleiding

5 April 2023
Black And Decker

Black And Decker KA280 Handleiding

28 Maart 2023
Black And Decker

Black And Decker MT300KA Handleiding

24 Maart 2023
Black And Decker

Black And Decker BDCMTO Handleiding

23 Maart 2023

Handleiding Multitool

Nieuwste handleidingen voor Multitool

Powerblade

Powerblade PC4MT5 Handleiding

10 December 2024
EGO

EGO PH1420E Handleiding

8 December 2024
Einhell

Einhell TE-MG 200 E Handleiding

4 December 2024
Alpha Tools

Alpha Tools A 180 Handleiding

17 November 2024
EGO

EGO MRC2306E Handleiding

17 November 2024
Workzone

Workzone WZMS 10,8 Li Handleiding

14 November 2024
Vonroc

Vonroc OT505DC Handleiding

20 Oktober 2024
Ozito

Ozito PXPPHTK-258 Handleiding

23 Augustus 2024
Ozito

Ozito PXGMTK-2536 Handleiding

30 Juli 2024
Einhell

Einhell BT-MG 180/1 Handleiding

10 Juli 2024