Black And Decker LZR6 Handleiding

Black And Decker Laserpointer LZR6

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker LZR6 (52 pagina's) in de categorie Laserpointer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/52

www.blackanddecker.com

English 3

Deutsch 6

Français 10

Italiano 14

Nederlands 18

Español 22

Português 26

Svenska 30

Norsk 34

Dansk 38

Suomi 42

∂ÏÏËÓÈÎ· 45

9 10

3 12 13

ENGLISH

Intended use

This Black & Decker tool has been designed to project laser

lines to aid in DIY applications.This tool is intended for

consumer use only.

Safety instructions

◆Warning! When using battery-powered tools, basic

safety precautions, including the following, should always

be followed to reduce the risk of fire, leaking batteries,

personal injury and material damage.

◆Read all of this manual carefully before operating the tool.

◆Retain this manual for future reference.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool.

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Use appropriate tool

The intended use is described in this instruction manual.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

Check for damaged parts

Before use, carefully check the tool for damage. Ensure that

the tool will operate properly and perform its intended

function. Do not use the tool if any part is damaged or defective.

Store idle tools

When not in use, tools and batteries should be stored in a dry,

locked up or high place, out of reach of children.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

Additional safety instructions for non-rechargeable

batteries

◆Never attempt to open for any reason.

◆Do not store in locations where the temperature may

exceed 40 °C.

◆When disposing of batteries, follow the instructions given

in the section “Protecting the environment”.

Do not incinerate the batteries.

◆Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries, proceed as follows:

- Carefully wipe the liquid off using a cloth.

Avoid skin contact.

Additional safety instructions for lasers

Warning! Laser radiation.

Do not look into the laser beam.

Do not view the laser beam directly with optical

instruments.

Refer to the laser product characteristics.

◆This laser complies with class 2 according to

EN 60825-1:1994+A1+A2. Do not replace a laser diode

with a different type. If damaged, have the laser repaired

by an authorised repair agent.

◆Do not use the laser for any purpose other than projecting

laser lines.

◆An exposure of the eye to the beam of a class 2 laser is

considered safe for a maximum of 0.25 seconds.

Eyelid reflexes will normally provide adequate protection.

At distances over 1 m, the laser complies with class 1 and

thus is considered completely safe.

◆Never look into the laser beam directly and intentionally.

◆Do not use optical tools to view the laser beam.

◆Do not set up the tool at a position where the laser beam

can cross any person at head height.

◆Do not let children come near the laser.

Features

1. On/off switch

2. Laser apertures

3. Mounting bracket

4. Battery cover

Assembly

Warning! Make sure that the tool is switched off.

Removing the locking key (fig. A & B)

The locking key (5) prevents damage to the laser head during

transportation.

◆Remove the battery cover (4) from the tool.

◆Twist the locking key (5) 1/4 turn and remove it.

Product specificaties

Merk:	Black And Decker
Categorie:	Laserpointer
Model:	LZR6
Kleur van het product:	Black, Red
Soort:	Lijnlaser
Accu/Batterij voltage:	9 V
Maximumbereik:	3 m
Laser klasse:	2
Nivellering accuratesse (±):	0.5 mm/m
Zelfnivellerings bereik (±):	- °
Kleur van laserstraal:	Rood