Black And Decker LHT321 Handleiding

Black And Decker Heggenschaar LHT321

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker LHT321 (36 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/36
To register your new product, call 1-800-544-6986
or visit www.BlackandDecker.com/NewOwner
INSTRUCTION MANUAL
20V MAX* HEDGE TRIMMER
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured
under a workload, nominal voltage is 18.
CATALOG NUMBER
LHT321
2
GENERAL POWER TOOL
SAFETY RULES
WARNING: Read all safety
warnings and all instructions. Failure to
follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e)
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter
(GFCI) protected supply. Use of a
GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, nonskid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to power
source and/ or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the
switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce dust-
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
3
related hazards.
4) POWER TOOL USE AND CARE
a)
Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits, etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
c) When battery pack is not in use,
keep it away from other metal
objects like paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions,
liquid may be ejected from the
battery, avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
6) SERVICE a)
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
HEDGE TRIMMER SAFETY
WARNINGS
DANGER:
Keep hands away from
blade. Contact with blade will result in
serious personal injury.
• Usebothhandswhenoperatingthe
hedge trimmer. Using one hand could
cause loss of control and result in
serious personal injury.
• Keepallpartsofthebodyawayfrom
the cutter blade. Do not remove
cut material or hold material to be
cut when blades are moving. Make
sure the switch is off when clearing
jammed material. Blades coast after
turn off. A moment of inattention while
operating the hedge trimmer may result
in serious personal injury.
WARNING: Only use with bail handle
and guard properly assembled to hedge
trimmer. The use of the hedge trimmer
without the proper guard or handle provided
may result in serious personal injury.
• Carrythehedgetrimmerbythehandlewith
the cutter blade stopped. Proper handling
of the hedge trimmer will reduce possible
personal injury from the cutter blades.
• Holdthepowertoolbyinsulated
gripping surfaces only, because the
cutter blade may contact hidden
wiring. Cutter blades contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
• Keep extension cord away from
cutting area. During operation the
extension cord may be hidden in shrubs
and can be accidentally cut by the blade.
•Checkthehedgeforforeignobjects,
e.g. wire fences.
CAUTION: Do not expose to rain.
WARNING: Remove plug from the
outlet immediately if the extension cord
becomes damaged or cut.
WARNING: Some dust created
by this product contains chemicals known
to the State of California to cause cancer,
birth defects or other reproductive harm.
Some examples of these chemicals are:
• compounds in fertilizers
• compounds in insecticides, herbicides
and pesticides
• arsenic and chromium from chemically
treated lumber

Product specificaties

Merk: Black And Decker
Categorie: Heggenschaar
Model: LHT321

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker LHT321 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Heggenschaar Black And Decker

Black And Decker

Black And Decker BCSS820 Handleiding

26 Augustus 2024
Black And Decker

Black And Decker GT5055 Handleiding

16 Juni 2023
Black And Decker

Black And Decker GT360 Handleiding

7 Juni 2023
Black And Decker

Black And Decker BCSS18 Handleiding

6 Juni 2023
Black And Decker

Black And Decker BEHTS501 Handleiding

16 Mei 2023
Black And Decker

Black And Decker LHT218 Handleiding

13 Mei 2023
Black And Decker

Black And Decker GT241 Handleiding

10 Mei 2023
Black And Decker

Black And Decker GTC3655L Handleiding

9 Mei 2023
Black And Decker

Black And Decker GT233 Handleiding

6 Mei 2023
Black And Decker

Black And Decker GT535 Handleiding

5 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel

Proviel PVH 600 Handleiding

19 November 2024
Proviel

Proviel PVHA 24 Handleiding

19 November 2024
Proviel

Proviel PVH 660 Handleiding

19 November 2024
Proviel

Proviel PVH 550 Handleiding

19 November 2024
Anova

Anova CG2660 Handleiding

17 November 2024
Sovereign

Sovereign SHT 550 Handleiding

16 November 2024
Gardenline

Gardenline GLH 690 Handleiding

16 November 2024
Gardenline

Gardenline GLHT 680 Handleiding

16 November 2024
Gardenline

Gardenline GLH 664 Handleiding

16 November 2024
Gardenline

Gardenline GLHT 551 Handleiding

16 November 2024