Black And Decker IB10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker IB10 (12 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Blender
Model IB10-12, IB53 - IB74 Series
English, see page 2
Save this use and care book
Licuadora
Model IB10-12, IB53 - IB74 Series
Español, consulte la página 5
Lease este instructivo antes de usar el producto
Mélangeur
Modèles des séries IB10, IB12, IB53 et IB74
Français, à la page 8
Conserver ce guide d’entretien et d’utilisation.
IB10-12, 53-74
*
PowerPro
2
IB10-12, 53-74
English
Please read all instructions.
To protect against risk of electrical shock,
do not put blender base, cord, or plug in
water or other liquid.
Close supervision is necessary when any
appliance is used by or near children.
Turn off and unplug from outlet when
not in use, before putting on or taking off
parts, and before cleaning.
Do not operate any appliance with a dam-
aged cord or plug, or after the appliance
malfunctions, or is dropped or damaged in
any manner. Return the appliance to an
authorized service facility for examination,
repair, or electrical or mechanical adjust-
ment.
Do not use outdoors.
The use of attachments including can-
ning jars, not recommended or sold by
the appliance manufacturer may cause a
risk of fire, electric shock, or injury to
persons.
Never carry the unit by the cord or yank
cord from an outlet.
Do not let the plug or cord hang over the
edge of table or counter, or touch hot sur-
faces including the stove. Unit should be
placed away from sinks and hot surfaces.
Remove the jar and blade assembly from
the blender before washing.
Unit should be used for food preparation
only.
Always operate blender with cover in place.
Keep hands and utensils out of container
while blending to reduce the risk of
severe injury to persons or damage to the
blender. A scraper may be used, but only
when the blender is not running.
Blades are sharp. Handle carefully.
Avoid contacting moving parts.
To reduce the risk of injury, never place
cutter assembly blades on base without
the jar properly attached.
When blending hot liquids, remove the lid
cap. Keep hands and face away from the
lid cap opening while motor is running.
Do not leave blender unattended during use.
This appliance is intended FOR
HOUSEHOLD USE ONLY and not
for commercial or industrial use.
IMPORTANT
SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electrical appliances, in
order to reduce the risk of fire, electric
shock, and/or injury to persons, basic
safety precautions should always be fol-
lowed, including the following:
1 1/4
1
3/4
1/2
1 1/2
1 1/4
1
3/4
1/2
1 1/2
1/41/4
1. Unit Base
2. Jar Base
3. Blade Assembly
4. Gasket
5. Jar
6. Lid
7. Cap
5
4
3
2
1
6
7
Cover
Blender Jar Assembly
1. Before first use, wash all parts except the
base. Put the gasket on top of the Blade
Assembly.
2. Place the Blade Assembly into the Jar
Base and turn the Jar Base clockwise until
tight. Figure A
3. Place the Jar firmly onto the Unit Base.
Figure B
How to Use
1. Be sure the unit is “off” and plug the cord
into a standard electrical outlet.
2. Place the food to be blended into the Jar.
3. Put the Lid on the Jar before beginning. Be sure
that the Lid Cap is in place. When crushing ice
or hard foods, keep one hand on the Lid.
4. Select the desired speed setting:
In general, use lower positions for gentle
blending, chopping, and grinding; in 6 speed
(IB73/IB74 Series), 10-speed (IB10 Series),
or 12-speed (IB12 Series) models use mid-
range positions for mixing, beating, and
creaming. In all models use higher settings
for heavy-duty blending such as liquefying
or pureeing fruits. In 6, 10, or 12-speed
models, press the Low/High button then,
press the appropriate speed level for blend-
ing at higher settings. Figure C
For quick blending tasks, press the Pulse
button for a few seconds, then release. Use
Pulse for best results when crushing ice.
The Electrical Cord
The cord length of this appliance was select-
ed to reduce safety hazards that may occur with
a longer cord. If more cord length is needed, an
extension cord may be used. It should be rated
not less than 10 amperes, 120 volts or 6
amperes, 220 volts. When using a longer cord,
be sure that it does not drape over a working
area or dangle where it could be pulled on or
ripped over.
Polarized Plug
(North American/Central American Models Only)
This appliance has a polarized plug—one
blade is wider than the other. To reduce
the risk of electric shock, this plug will fit
into a polarized outlet only one way. If
the plug does not fit fully into the outlet,
reverse it. If it still does not fit, contact a
qualified electrician. Do not attempt to
defeat this safety feature by modifying the
plug in any way.
Tamper-Resistent Screw
This appliance is equipped with tamper-
resistant screws to prevent removal of the
outer cover. To reduce the risk of fire or elec-
tric shock, do not attempt to remove the
outer cover. There are no user serviceable
parts inside. Repair should be done only by
authorized service personnel.
1 1/4
1
3/4
1/2
1 1/2
1 1/4
1
3/4
1/2
1 1/2
1/41/4
Figure A
1 1/4
1
3/4
1/2
1 1/2
1 1/4
1
3/4
1/2
1 1/2
1/41/4
Figure B
3
61
7
8
9
10
2
3
4
5
LOW HIGH
OFF / PUL SE
ICE CRUSHING
71
8
9
10
11
12
2
3
4
5
6
LOW HIGH
OFF / PUL SE
ICE CRUSHING
2 5
4
HIGHLOW
3 6
1
OFF / PULSE
ICE CRUSHING
2 5
4
3 6
1
11
2
OFF
PULSE
ICE CRUSHING
1
2
Figure C
IB53/IB54 IB73/IB74 IB10 IB12
Cover


Product specificaties

Merk: Black And Decker
Categorie: Blender
Model: IB10

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker IB10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Black And Decker

Handleiding Blender

Nieuwste handleidingen voor Blender