Bixolon STP-103III Handleiding

Bixolon Niet gecategoriseerd STP-103III

Lees hieronder de 📖 handleiding in het Nederlandse voor Bixolon STP-103III (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

Users’ Manual

STP-103III

Thermal Printer

Rev. 1.02

http://www.bixolon.com

STP- 103III

Rev. 1.02

- 2 -

■

■■ Safety Precautions

The instructions shown below must be followed prevent possible danger or damage by to

using the product incorrectly.

Warning

Serious injury or death may result if the instructions associated with this sign

are not followed.

Do not apply excessive force to bend the cable and

do not place heavy objects on the cable.

• It could cause a fire.

Do not plug or unplug the power plug with wet

hands.

• It could cause an electric shock.

Keep the vinyl pack out of reach of children.

• It is dangerous to children.

Do not pull the cable to unplug the power plug.

• Power cord may get damaged, which could cause faults or

re.

Use only the adaptor supplied with the product.

• Using other adapters is dangerous.

Do not plug in multiple products into one outlet at

the same time.

• It could result in overheating or re.

• If dirt or moisture enter the power plug, clean it thoroughly

before using it.

• If the power receptacle is loose, do not connect in the power

plug.

• Use only standard multi-outlets.

PROHIBIT

ONLY SUPPLIED ADAPTER

PROHIBIT

STP- 103III

Rev. 1.02

- 3 -

Caution

Minor injury or product damage may result if the instructions associated with

this sign are not followed.

Keep the desiccant out of the reach of children

• It is dangerous if children eat it.

Do not use the product if it is malfunctioning. It

could cause re or electric shock.

• Turn o the power to printer main body immediately, unplug

the power cord, and contact the sale representative.

Take care not to let water or dirt get inside the main

body of the printer.

• When water or dirt penetrated the main body, turn off the

power to the printer main body rst, unplug the power cord,

and contact the sales representative.

Use only approved parts, and avoid unauthorized

disassembly, repair, or modication.

• Contact the sales representative as unauthorized service

may damage the product.

• Do not touch the blade of the auto cutter as it is sharp.

Install the product in a stable place.

• Product may be damaged or it could cause an injury if it falls

over.

If smoke, strange smells or noises come from the

product, turn o the power immediately and follow

the instructions below.

• If the product is not working normally, turn off the power to

the printer main body immediately and unplug the power

cord from the outlet.

• After checking that there is no smoke, request repair from

where you purchased the product.

PROHIBIT

DISASSEMBLING

PROHIBITED

Display

PRINTER

DEALER

Display

TO UNPLUG

Product specificaties

Merk:	Bixolon
Categorie:	Niet gecategoriseerd
Model:	STP-103III
Kleur van het product:	Zwart
Gewicht:	450 g
Breedte:	116 mm
Diepte:	90 mm
Hoogte:	180 mm
Soort:	POS-printer
USB-poort:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Aantal USB 2.0-poorten:	1
Temperatuur bij opslag:	-20 - 60 °C
Luchtvochtigheid bij opslag:	10 - 90 procent
Maximale resolutie:	203 x 203 DPI
Maximum roll diameter:	60 mm
Printtechnologie:	Direct thermisch
Standaard interfaces:	Parallel, USB 2.0
Meegeleverde drivers:	Ja
Buffergrootte:	64 KB
Ingebouwde streepjescodes:	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, ITF, PDF417, QR Code, UPC-A, UPC-E
Maximale print breedte:	48 mm
Printsnelheid (metrisch):	80 mm/sec
Parallelle poort(en):	1
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent
Ondersteunde papierwijdte:	57.5 mm
Parallele connector:	Ja
Karakter grootte:	24 x 24 mm