Biostar G31-M7 TE Handleiding
Biostar
Moederbord
G31-M7 TE
Lees hieronder de π handleiding in het Nederlandse voor Biostar G31-M7 TE (47 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 115 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/47
G31-M7 TE Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendorβs approval in writing.
The content of this userβs manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this userβs manual. All the
brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: Introduction ............................................................ 1
1.1 Before You Start ................................................................................ 1
1.2 Package Checklist............................................................................. 1
1.3 Motherboard Features...................................................................... 2
1.4 Rear Panel Connectors ..................................................................... 3
1.5 Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation ............................................. 5
2.1 Installing Central Processing Unit (CPU) ....................................... 5
2.2 FAN Headers...................................................................................... 7
2.3 Installing System Memory................................................................ 8
2.4 Connectors and Slots ....................................................................... 10
Chapter 3: Headers & Jumpers Setup ..................................... 12
3.1 How to Setup Jumpers .................................................................... 12
3.2 Detail Settings .................................................................................. 12
Chapter 4: Useful Help ............................................................ 18
4.1 Driver Installation Note.................................................................. 18
4.2 Software............................................................................................ 19
4.3 Extra Information............................................................................ 23
4.4 AMI BIOS Beep Code....................................................................... 25
4.5 Troubleshooting............................................................................... 26
Appendencies: SPEC In Other Language ................................ 28
German.................................................................................................................. 28
France .................................................................................................................... 30
Italian..................................................................................................................... 32
Spanish ................................................................................................................... 34
Portuguese ............................................................................................................ 36
Polish...................................................................................................................... 38
Russian ................................................................................................................... 40
Arabic..................................................................................................................... 42
Japanese ................................................................................................................ 44
G31-M7 TE
1
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
ξ Prepare a dry and stable working environment with
sufficient lighting.
ξ Always disconnect the computer from power outlet
before operation.
ξ Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
ξ Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
ξ Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
ξ Keep the computer from dangerous area, such as heat
source, humid air and water.
1.2 P CACKAGE HECKLIST
HDD Cable X 1
Serial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may differ by area or your motherboard version.
Product specificaties
Merk: | Biostar |
Categorie: | Moederbord |
Model: | G31-M7 TE |
Breedte: | 235 mm |
Diepte: | 179 mm |
Grafische adapter: | GMA 3100 |
Type stroombron: | ATX |
Aantal USB 2.0-poorten: | 4 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 1 |
Hoofdtelefoonuitgangen: | 3 |
Processor socket: | LGA 775 (Socket T) |
Processorfabrikant: | Intel |
Maximum intern geheugen: | 4 GB |
Ingebouwde grafische adapter: | Ja |
Compatibele besturingssystemen: | Windows 2000/XP/Vista |
Audio-uitgangskanalen: | 5.1 kanalen |
Netwerkfuncties: | Fast Ethernet |
Snelle installatiehandleiding: | Ja |
Audiochip: | Realtek ALC662 |
Meegeleverde drivers: | Ja |
PCI Express x1 slots: | 1 |
PCI Express x16 slots: | 1 |
PS/2 poort(en): | 2 |
LAN controller: | Realtek RTL8102E(L) |
Maximum geheugen grafische adapter: | 256 MB |
PCI-slots: | 2 |
Compatibele processors: | Intel Celeron D, Intel Pentium 4, Intel Pentium D, Intel Pentium Dual-Core |
Moederbord form factor: | micro ATX |
Aantal geheugenslots: | 2 |
Aansluiting voor CPU koeler: | Ja |
Aantal SATA-aansluitingen: | 4 |
USB 2.0 aansluitingen: | 2 |
Aansluiting voor audiopaneel aan voorzijde: | Ja |
Aantal COM-poorten: | 1 |
S/PDIF uitgang: | Ja |
CD/AUX audio-ingang: | Ja |
Aantal Parallel ATA aansluitingen: | 1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Biostar G31-M7 TE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Biostar
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord Supermicro
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
Nieuwste handleidingen voor Moederbord
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024