Binatone Veva 1520 Handleiding

Binatone Telefoon Veva 1520

Lees hieronder de 📖 handleiding in het Nederlandse voor Binatone Veva 1520 (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
1 2
1 IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4)
5) Do not overload wall outlets and extension cords as this can result in the
6) Unplug this product from the wall outlet and refer servicing to our Repair
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
•
If the product exhibits a distinct change in performance.
7) NEVER use your phone outdoors during a thunderstorm-unplug the
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the unit
or surroundings. The manufacturer will not be held liable for damage arising
from such non-compliance.
11) Do not use third party charging bays. Damage may be caused to the batteries.
12) Please ensure the batteries are inserted in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
Package contents
The package contains the following items:
• 1 Handset
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 2 AAA rechargeable batteries
• 1 User manual
them where they could get punctured.
Centre under the following conditions:
following:
a bath tub, kitchen sink, swimming pool).
Keep your phone away from hot, humid conditions or strong sunlight,
and don't let it get wet or use this product near water (for example, near
base from the telephone line and the mains socket when there are storms
in your area. Damage caused by l ightning is not covered by the guarantee.
Note: If you have a Twin, Triple or Quad system, you will also have the requisite
extra handset(s) and batteries, and a charger pod for each extra handset.
risk of fire or electric shock.
3 4
Connection and conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket connected to a DEL;
or to an extension on an approved compatible PBX. Do not connect as an
extension to a payphone.
The ringer equivalence numbers (REN) of all equipment (phones, fax machines,
modems, etc.) connected to an exchange line must not add up to more than 4,
otherwise one or more of them may not ring and/or answer calls correctly. The
marked otherwise.
phone has a REN of 1, and most other telephones have a REN of 1 unless
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit and should
link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be able to
establish a radio link between them. The signal between the handset and the base is
> Any large metal object, such as a refrigerator, mirror or filing cabinet, between the
handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
3) Do not place close to another telephone, a TV or audio equipment - it may cause
interference.
4) Out of Range warning. If you hear a warning tone during a call, and/or the sound
in the earpiece becomes faint or distorted, you may be going out of range of the base
unit, so move nearer to the base unit within 20 seconds, otherwise the call may be
cut off.
to 300 metres outdoors or 50 metres indoors. Be aware that:
in accordance with the normal standards for a DECT phone: Maximum range up
65
2 INSTALLING YOUR PHONE
2.1 Connecting the base station
1) Plug the power supply and line cord
into
2) Plug the power adapter into a 230Vac,
3) Always use the cables provided in the box
Warning: Use only the provided adaptor, using
other power supplies may cause a hazard.
the base station.
50Hz mains socket, and the line cord into your
2.2 Installing and charging the batteries
1) Place the 2 supplied batteries into the battery
3) Put the handset on the base and charge for
15 hours before using the handset for the first time.
If y ou h a ve a Br oadband l ine
If you connect your telephone to a line with
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the broadband,
which could cause problems.
a broadband connection, you will need to
telephone line socket.
Warning: Install the base unit in a position where the mains adapter plug
will reach an easily accessible mains socket. Never try to lengthen the
mains power cable.
Note: The base unit needs mains power for normal operation, not just for
charging the handset batteries.
Use only the NiMH rechargeable battery type
The handset will give a beep when it is properly placed on the base or charger.
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
2) Position the battery compartment cover over the
batteries and slide up to click into place.
provided.
compartment with the polarity markings as shown.
3 GETTING TO KNOW YOUR PHONE
3.1 Handset Overview
The LCD display gives you information on the current status of the telephone.
Indicates you can scroll up / down the menu items / Phonebook list /
Steady when the handset is in range of the base. Flashes when out of
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
range of the base or not registered to the base.
Indicates that your answering machine (TAM) is on and flashes when
there is a new message.
3.3 Display Icons and Symbols
7 8
3.2 Base Station with Telephone Answering Machine (TAM) Control
Redial list / Call List
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
UK network providers.)
Indicates when the battery is fully charged.
Whole icon flashes when the battery is charging.
Internal block icon flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
(BACK)
(INT)
Indicates when there are more characters or numbers in front of those
Indicates when there are more characters or numbers after those being
LEFT SOFT KEY function. Press to access the main menu.
LEFT SOFT KEY function. Press to confirm the current selection.
Indicates a new TAM message is playing or a new Call List entry is being
RIGHT SOFT KEY function. Press to start an intercom call.
RIGHT SOFT KEY function. Press to go back to the previous menu level
RIGHT SOFT KEY function. Press to clear a character, stop the alarm, or
being displayed.
displayed.
or cancel the current action.
mute/unmute the microphone during a call.
displayed.
Indicates that the
3.4 Menu Structure
In idle mode, press <MENU/OK> to go to CALL LIST, the first option in the
Refer to the following for the menu structure.
Press <UP> or <DOWN> to go to other options in the menu list.
Press <MENU / OK> to enter a sub-menu or function.
Press <C / MUTE> to go back to the previous level.
9 10
menu list.
4 USING YOUR PHONE
4.1 Make a Call
4.1.1 Preparatory Dialling
Enter the phone number and press <TALK ON> to connect to the line and
dial the number. When entering the number, if you make a mistake, press
4.1.2 Direct Dialling
Press <TALK ON> to connect to the line and then enter the phone number.
4.1.3 Call from the phonebook
Press <MENU/OK>, <DOWN> and then <MENU/OK> again to access the
Press <TALK ON> to dial out the selected phonebook entry.
(Note: if you enter a wrong digit you cannot correct it with the <C/MUTE> key.)
phonebook and press <UP/DOWN> to select the desired phonebook entry.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Press <TALK ON> to dial out the selected Call List entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
4.1.5 Call from the redial list
Press <REDIAL> to access the redial list and press <UP/DOWN> to select the
Note: The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.
Call List entry.
desired redial number.
Press <TALK ON> to dial out the selected redial number.
4.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after
It is shown in hours, minutes and seconds format (HH:MM:SS).
4.2 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press <TALK ON> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
charger will answer the call automatically, and no buttons need to be
4.3 End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
pressed.
4.4 Adjust Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece
During a call:
setting is shown.
When you end the call, the setting will remain at the last selected level.
4.5 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C/MUTE> to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press <C/MUTE> again to unmute the microphone.
4.6 the
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”
volume.
icon is displayed on the LCD.
4.7 Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad lock, and the "KEY
4.8 Redial the last number
You can redial any of the 5 last numbers called. If you have stored a name
number, the name will be displayed instead.
4.8.1 Redial a Number from the Redial List
1. Press <REDIAL> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
“EMPTY ”.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off
To turn the ringer back on, press and hold <HASH/#> again.
Note: You can still use <TALK ON> to answer a call
To turn the keypad lock off, press and hold <STAR/*> again.
The most recent last number will display at the top of the redial list.
of this entry.
handset is ringing.when the
dialling and remains on the screen for 5 seconds after the end of the call.
ress <UP/DOWN> to select volume 1-5. The current
Turn off Handset Ringer
P
11 12
in phonebook to go with the
4.8.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU/OK> to show ADD TO PB.
3. Press <MENU/OK> and then enter the name you want to use in the
phonebook.
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
7. Press <MENU/OK> to confirm, and the entry will be stored.
only be played if you subscribe to Caller Display and the incoming number
matches the stored number.)
4.8.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE.
3. Press <MENU/OK> to confirm, and the entry will be deleted.
4.9 Find the Handset
You can locate the handset by pressing <FIND> on the base station. All the
handsets registered to the base will produce the paging tone and show
4.8.4 Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL
3. Press <MENU/OK> to display <CONFIRM?>.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display
<TALK OFF> /<C/MUTE> on any handset or <FIND> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
4.10 Make an Internal Call (
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
incoming call instead of paging.
"PAGING" on the display. You can stop the paging by pressing <TALKON>/
another handset and make conference calls. If the called handset is not
answered within 60 seconds, the called handset will stop ringing and the calling
Note: If only one handset is registered to the base station, when <C/MUTE>
is pressed, it will display “NOT POSSIBLE”
4.10.1 Intercom Another Handset
1. In idle mode, press <C/MUTE> and all the other registered handset
2. Enter the number of the handset that you want to call, or press the < 9 >
3. The called handset rings and <TALK ON> must be pressed on that handset
Note: If only two handsets are registered to the base station, pressing
<C/MUTE> will call the other handset immediately.
numbers will display, along with a "9".
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU/OK> to show INTERCOM.
2. Press <MENU/OK> to show all the other registered handset numbers,
plus "9".
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON> on the called handset to establish an internal call.
Enter the number for the handset you want to transfer the call to.
handset will return to standby mode.
key to call all handsets.
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
4.10.2 Call All Handsets
1. In idle mode, press <C/MUTE> and the registered handsets will display.
2. Press the < 9 > key to ring to all registered handsets
4.10.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.10.3.
2. Press and hold <STAR / * > on the calling handset to establish the conference
call.
Either handset can exit the conference by pressing <TALK OFF>, leaving
to establish the intercom call.
Note: If there is an external call while you are on an intercom call, you'll
hear warning beeps, and you have to end the intercom call, before you can
answer the external call.
Note: If the other handset has not answered the intercom call, you can stop
the intercom and return to the external call by pressing <TALK OFF>
13 14
Multi - handset versions only)
5 PRIVATE PHONEBOOK
Each handset can store up to 20 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. (Note: the different ringtones only play if
5.1 Add a New Phonebook Entry
In idle:
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2. Press <MENU/OK> to show ADD.
Press <MENU/OK> and then enter the name.
4. Press <MENU/OK> and then enter the number.
5. Press <MENU/OK> and <UP/DOWN> to select the desired ringtone for
6. Press <MENU/OK> to store the phonebook entry.
you subscribe to Caller Display and the incoming number matches the stored
number.) Phonebook entries are stored alphabetically by name.
5.2 Search a Phonebook Entry
In idle:
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2. Enter the first letter of the name using the alphanumeric keys(e.g. if it
5.3 View a Phonebook Entry
In idle:
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU/OK> and <UP/DOWN> to select VIEW.
4. Press <MENU/OK> and <UP/DOWN> to review the name, number and
Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or
<RIGHT SOFT KEY> to view the remaining digits.
to scroll to the entry you want.
begins with C, press the 2 key three times), and then <UP/DOWN>
Remote operation
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide
8.5.9.1 on page 30.
1
2
3
4
Note: <*> key must be entered while the OGM is still playing, and the 4-digit
consecutively, the line will be release
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 14 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
The
PIN should follow without any delays. If the 4-digit Remote Access
PIN is entered incorrectly three times
automatically.
15 16
press <MENU/OK> to access the phonebook.
press <MENU/OK> to access the phonebook.
3.5 Text and Digit Entry Table
The following table shows you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after
2. You can move the cursor within the text with the <UP/DOWN> keys to
amend the text entry.
3. Press <C/MUTE> to delete the last character.
4. Press and hold <C/MUTE> to delete the entire text string.
3.5.1 Character Set
Key
Press 1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 space - 1 1
2 A B C 2 2
3D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, or P (Pause) if press and hold
** ? / \ ( ) *
# o ,- #
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
ADD TO PB
DELETE
DELETE ALL
DETAILS
Shows EMPTY
or the first Call
List Entry. Then
<OK> for:
, , &
Main
Menu CALL LIST PHONEBOOK BS
SETTINGS
HS
SETTINGS REGISTRATION DEFAULT ANS. MACHINE
Sub
menu
PIN? - - - - MSG PLAYBACK
DELETE ALL
MEMO
TAM ON/OFF
TAM SETTINGS
ANSWER MODE
TAM LANGUAGE
OGM SETTINGS
ANSWER DELAY
RECORD TIME
REMOTE ACC
COMPRESSION
PIN? - - - -
<UP/DOWN>
Key Press
<MENU> <UP/
DOWN>
<UP/
DOWN> <UP/
DOWN> <UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
phonebook Entry.
ADD
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
Shows EMPTY
or the first
Then <OK> for:
ADD
PB STATUS
or
DIAL MODE
FLASH TIME
CHA NGE PI N
ALARM
RING SETUP
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
BS RING ER
RING VOL UME
DEL ETE HS
CHANGE PIN
BS SCREENING
Note: There are some different characters if the handset language is
changed (7.3.5).
a short pause.
5.4 Edit a Phonebook Entry
In idle:
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU/OK> and <UP/DOWN> to select EDIT.
4. Press <MENU/OK> to display the current name.
5. Edit the name and press <MENU/OK>.
6. Edit the number and press <MENU/OK>.
7. Press <UP/DOWN> to select the ringtone and press <MENU/OK> to confirm.
5.5 Delete a Phonebook Entry
In idle:
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU/OK> and <UP/DOWN> to select DELETE.
4. Press <MENU/OK> to confirm, and the entry will be deleted.
5.6 Delete
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2.
3.
Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
4.
Press <MENU/OK> to display <CONFIRM?>.
Press <MENU/OK> to confirm. All entries will be deleted and the display will
5.7 Check the Phonebook Usage
You can check how many phonebook entries are stored in your handset and
how many phonebook entries are available for you to store in the phonebook.
1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then
2. Press <MENU/OK> and <UP/DOWN> to select PB STATUS.
3. Press <MENU/OK> to display how much of the phonebook is being used
for example <14/20 USED> means 14 entries are stored out of the
total 20 available spaces.
all Phonebook entries
press <MENU/OK> to access the phonebook.
press <MENU/OK> to access the phonebook.
press <MENU/OK> to access the phonebook.
press <MENU/OK> to access the phonebook.
TABLE OF CONTENTS
1
IMPORTANT SAFETY INSTRUCTIONS
...........................................................
2
INSTALLING YOUR PHONE
............................................................................5
2.1
CONNECTING THE BASE STATION
.......................................................................... 5
2.2 ...................................................... 5
3 GETTING TO KNOW YOUR PHONE ................................................................6
3.1
HANDSET OVERVIEW
................................................................................................ 6
3.2
BASE STATION WITH TELEPHONE ANSWERING MACHINE (TAM) CONTROL
......
3.3
DISPLAY ICONS AND SYMBOLS
............................................................................... 7
3.
MENU STRUCTURE
....................................................................................................
3.
TEXT AND DIGIT ENTRY TABLE
................................................................................ 9
3.5.1 9
4 USING YOUR PHONE .....................................................................................
4.1
MAKE A CALL
............................................................................................................
4.1.1 P
REPARATORY DIALLING
.....................................................................................
4.1.2
DIRECT DIALLING
...................................................................................................
4.1.3 .............................................................................10
4.1.4 CALL FROM THE CALL LIST(ONLY AVAILABLE WITH CALLER DISPLAY)
4.1.5
CALL FROM THE REDIAL LIST
4.1.6 .............................................................................................................10
4.2
ANSWER A CALL
.....................................................................................................
4.3
END A CALL
..............................................................................................................
4.4
ADJUST EARPIECE VOLUME
...................................................................................
4.5
MUTE A CALL
............................................................................................................
4.6 11
4.7
TURN ON THE KEYPAD LOCK
................................................................................
4.8 ...................................................................................
4.8.1
REDIAL A NUMBER FROM THE REDIAL LIST
.......................................................
4.8.2
STORE A REDIAL NUMBER INTO THE PHONEBOOK
..........................................
4.8.3
DELETE A REDIAL NUMBER
..................................................................................
4.8.4 DELETE ALL REDIAL LIST ENTRIES
4.9
FIND THE HANDSET
.................................................................................................
4.10
MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY )
...............
4.10.1
INTERCOM ANOTHER HANDSET
.........................................................................
4.10.2
CALL ALL HANDSETS
............................................................................................
4.10.3
TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET.
...............................
4.10.4
MAKE A 3-WAY CONFERENCE CALL
...................................................................
5 PRIVATE PHONEBOOK..................................................................................
5.3
VIEW A PHONEBOOK ENTRY
.................................................................................
5.1
ADD A NEW PHONEBOOK ENTRY
..........................................................................
5.2
SEARCH A PHONEBOOK ENTRY
............................................................................
4
5
8
10
10
10
10
CHARACTER SET
10
TURN OFF HANDSET RINGER
3
10
.........
...............................................................................10
11
11
11
.................................................................................
11
11
......................................................................
11
12
12
12
12
13
13
13
13
14
14
14
14
5.4 E
DIT A
P
HONEBOOK
E
NTRY
...................................................................................
5.5 D
ELETE A
P
HONEBOOK
E
NTRY
.............................................................................
5.6 D
ELETE
5.7 C
HECK THE
P
HONEBOOK
U
SAGE
.........................................................................
6 CALLER DISPLAY (NETWORK DEPENDENT)
..............................................
6.1
VIEW THE CALL LIST
................................................................................................
6.2
STORE A CALL LIST NUMBER INTO THE PHONEBOOK
......................................
6.3
DELETE AN ENTRY IN THE CALL LIST
...................................................................
6.4 DELETE ALL CALL LIST ENTRIES
7 PHONE SETTINGS .........................................................................................
7.1
DATE AND TIME SETTINGS
......................................................................................
7.1.1
CHANGE THE DATE FORMAT
.................................................................................
7.1.2
HANGE THE TIME FORMAT
....................................................................................
7.1.3
SET THE TIME
..........................................................................................................
7.1.4
SET THE DATE
.........................................................................................................
7.2
ALARM SETTINGS
....................................................................................................
7.2.1
TURN ON/OFF THE ALARM
....................................................................................19
7.2.2
SET THE ALARM TIME
............................................................................................ 19
7.3
HANDSET SETTINGS
................................................................................................
7.3.1 SET THE RINGER MELODY FOR INTERNAL CALLS
7.3.2
SET THE RINGER MELODY FOR EXTERNAL CALLS
...........................................
7.3.3
SET THE RINGER VOLUME
....................................................................................
7.3.4
SET ALERT TONES
..................................................................................................
7.3.5
SET THE HANDSET LANGUAGE
............................................................................
7.3.6
RENAME THE HANDSET
.........................................................................................
7.3.7
CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE
..................................
7.3.8
SET THE AUTO ANSWER
.......................................................................................
7.4
BASE SETTINGS
........................................................................................................21
20
2
TROUBLESHOOTING ...............................................................................................
DECLARATION OF CONFORMITY........................................................................
20
20
21
21
7.4. DE-REGISTER A HANDSET ....................................................................................21
7.4. CHANGE THE DIAL MODE ......................................................................................
7.4. CHANGE THE FLASH (RECALL)TIME ....................................................................
7.4. CHANGE THE SYSTEM PIN CODE ........................................................................
22
7.5 REGISTRATION .........................................................................................................23
7.6 RESET YOUR PHONE ...............................................................................................
22
22
1
2
3
4
9
ALL PHONEBOOK ENTRIES 15 11 GUARANTEE AND SERVICE
................................................................................. 248 ANSWERING MACHINE
.......................................................... 24
10
32
33
34
....................................................................................
Remote ..Card .............
..................................................................................................
Remote Card 29
16
15
15
15
.....................................................................
17
18
17
17
17
.........................................................................
18
............................................
18
18
18
18
19
20
20
23
................................................................................
21
INSTALLING AND CHARGING THE BATTERIES
7
....................................................................................................
CALL FROM THE PHONEBOOK
CALL TIMER
REDIAL THE LAST NUMBER
19
1
12
8.1 TURN ON/OFF THE ANSWERING MACHINE
248.2 L
258.3
268.4
......................................................................... 268.5 ANSWERING MACHINE SETTINGS
ISTEN TO THE MESSAGES IN THE ANSWERING MACHINE ..............................
DELETE ALL MESSAGES IN THE ANSWERING MACHINE ...................................
RECORD MEMO ........................................................................................................
d
Press
approximately 60
TAM ON/OFF
Press to turn on the answering
Press again to turn off
PLAY/STOP
Press to play the message
Press to stop the message
SKIP FORWARD
Press to skip the current
machine.
message and play the next
message.
to
It will ring for
MESSAGE LED
Light On when TAM is ON
Light Off when TAM is OFF
the answering machine.
seconds
Flashes when new
messages received
or incoming call.
DELETE
SKIP BACKWARD
Press to repeat playing
Press twice to skip back
to the previous message.
playback
From idle: Press and hold
to delete all the old messages.
Press once to delete
t
he message during playback
the current message from
the beginning.
Veva 1520 system
Press to
decrease the playback
Volume, or the base ringer
volume during incoming
ringing.
FIND
find your handset.
2 LEFT SOFT KEY( )
Use with icons on display above, to
open menu and confirm options.
Make or answer calls
4 DOWN( )
From idle: access the Redial List
In lists: move down the options
During calls / ringing: decrease the
5 REDIAL( )
Use with icons on display above, to
8 R - RECALL( )
Sends a recall (R) signal, used for some PBX / Calling Features.
7 TALK OFF( )
End a call or return to previous menu.
1 UP ( )
From idle: access the Call List
Press and hold to turn the handset on / off.
In lists: move up the options
During calls / ringing: increase the volume.
menu, mute the microphone or make
3 TALK ON( )
(CLEAR/BACK/MUTE/INTERCOM)
6 RIGHT SOFT KEY( )
clear characters, go back to previous
an intercom call.
volume
3
1
2
4
58
6
7
also called Flash
Press to
increase the playback
Volume, or the base
during incoming ringing.
ringer volume
Digital Cordless Telephone
with Answer Machine
Veva 1520
Veva 1520 Twin
Veva 1520 Triple
Binatone Helpline (for UK only)
Monday to Friday from 9:00am to 5:00pm
Tel: 0845 345 9677
**Please note that all calls are charged at local rate
Or visit our website: www.binatonetelecom.com
USER GUIDE
Veva 1520 Quad
Charger unit:
TenPao - S004LB0600030 / S004LV0600030 -
input 100-240VAC 50/60Hz 150mA, output 6VDC 300mA
Salcomp – VT1001 / VT1000 .
Base unit:
TenPao - S004LB0600045 / S004LV0600045 -
input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA
Salcomp – VT0601 / VT0600 .
Battery information as below:
GPI – VTHC043C00, Type NiMH (Rechargeable battery)
BYD- H-AAA400A, Type NiMH (Rechargeable battery)
CORUN- NI-MHAAAJ400, Type NiMH (Rechargeable battery)
Electrical power
input 100-240VAC 50/60Hz 150mA, output 6VDC 300mA
input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA
Voltage Rating 400mAh ,2 X 1.2V AAA Size
Voltage Rating 400mAh , 2 X 1.2V AAA Size
Voltage Rating 400mAh, 2 X 1.2V AAA Size
TECHNICAL DETAILS
Standard
Frequency range
Channel bandwidth
Operating range
Operating time
Temperature range
Digital Enhanced Cordless Telecommunication (DECT)
1.88 to 1.9 GHz
1.728 MHz
Up to 300m outdoors;
Standby: 100 hours,
Talking:
10 hours
Battery charge time:15 hours
Operating 0 C to 40 C, Storage -20 C to 60 C
(bandwidth = 20 MHz)
Up to 50m indoors
Caution
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
The port (connected to the mains power supply) is a SELV port with
The port (connected to the telephoneline ) is a TNV port with
respect to EN41003.
CLEANING AND CARE
Do not clean any part of your phone system with benzene, thinners or other
solvent chemicals as this may cause permanent damage which is not covered
by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your hot, humid conditions
or
strong sunlight, and don't let it get wet.
Every effort has been made to ensure high standards of reliability for your
consult your supplier or the Helpline.
do
not try to repair it yourself
phone system away from
Port specification
respect to EN41003.
phone system. However, if something does go wrong, please
handset ringer is switched off.
<C/MUTE> to delete digits.
show <EMPTY>.
press <MENU/OK> to access the phonebook.
will show <EMPTY>.
LOCK" icon is displayed on the LCD.
the other handset still connected to the external call.
your phonebook entry.
ringtone of the selected phonebook entry.
3.
If the call is from someone who withheld their number, e.g. by dialling 141,
will display.
If the call is from someone whose number is unavailable, e.g. an international
call or from a private exchange, will display. “OUT OF AREA”
If you've got new Caller Display records, the handset will display "X NEW
6.1 View the Call List
All received calls are saved in the Call List with the latest call at the top of the list.
When the call list is full, the oldest call will be replaced by a new call. Any
unanswered calls which have not been viewed are marked with a <*> icon at the
CALLS" in standby mode. The New Calls indication will remain until all the new
call records have been viewed.
centre of the bottom line of the display.
1. Press <UP> to access the call list.
OR Press <MENU/OK> to show CALL LIST and then press <MENU/OK>.
2. Press <UP/DOWN> to select the desired entry.
3. Press <#> to view the caller’s number if applicable.
6.2 Store a Call List Number into the Phonebook
1. Follow Steps 1 and 2 in Section 6.1 .
2. Press <MENU/OK> and <UP/DOWN> to show ADD TO PB.
3. Press <MENU/OK> and then enter the name.
4. Press <MENU/OK> and the selected call list number is displayed.
5. Edit the number if necessary.
6. Press <MENU/OK> and <UP/DOWN> to select the ringtone.
7. Press <MENU/OK> to store the phonebook entry and return to the calls list.
4. Press <MENU/OK>, <UP/DOWN> to show DETAILS, and then <MENU/OK>
to display the date and time of the call. Press <MENU/OK> to go back to the
previous screen.
6.3 Delete an entry in the Call List
1. Follow Steps 1 and 2 in Section 6.1 .
2. Press <MENU/OK> and <UP/DOWN> to select DELETE
.
3. Press <MENU/OK> to confirm.
“ W ITHHELD”
6 CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed to the Calling Line Identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the Call List. The number will be
shown on the handset display when the phone is ringing. If the number matches
with one of the entries in your Private Phonebook, the caller's name stored in the
private phonebook will be displayed alternately with the number, and the
handset will ring with the ringtone associated with that phonebook entry.
17 18
Delete
1. Follow Steps 1 and 2 in Section 6.1.
. 2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
3. Press <MENU/OK> to display <CONFIRM?>.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
7 PHONE SETTINGS
Your phone comes with a selection of settings that you can change to
personalise your phone the way you like it to work.
7.1 Date and Time Settings
If you subscribe to Caller Display the time and date settings will be automatically
updated by the network when you receive an incoming call.
The Caller Display service only sends the month and date, not the year, so you
may need to set the year.
7.1.1 Change the Date Format
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> to show DATE FORMAT.
4. Press <MENU/OK> and <UP/DOWN> to select your desired date format
(DD-MM-YYor MM-DD-YY).
5. Press <MENU/OK> to confirm.
7.1.2 Change the Time Format
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select TIME FORMAT.
4. Press <MENU/OK> and <UP/DOWN> to select your desired time format
5. Press <MENU/OK> to confirm.
7.1.3 Set the Time
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET TIME.
4. Press <MENU/OK> and then enter the time information in 24 hour format.
5. Press <MENU/OK> to confirm.
Note: If the time has been set before, the current time will display, otherwise,
“HH:MM” will display.
7.1.4 Set the Date
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET DATE.
4. Press <MENU/OK> and then enter the date information.
5. Press <MENU/OK> to confirm.
Note:
“DD-MM-YY ” will display.
You can set an alarm time on this phone. When an alarm is set, the <ALARM
l
con> is shown on the handset display.When the alarm time is reached, the
<ALARM icon> and “ALARM ON ” flash on the handset display, and the alarm
tone rings for 45 seconds. You can press any key to disable the alarm. If the
snooze function is activated, the alarm will sound again at the end of the snooze
period of seven minutes. You can also press and hold <TALK OFF> while the
Note:
a. A key press will still disable the alarm even if the handset keypad is locked
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds
at VOLUME 1 level.
when the alarm rings.
(12 HR or 24 HR).
c. During an external call or internal call, if an alarm is set and when the alarm
time is reached, the <ALARM icon> and “ALARM ON
” will still flash. An
alarm tone will be emitted from the earpiece to alert the user the alarm time
is reached. Once the user presses any key or presses and holds.
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no paging
7.2.1 Turn on/off the Alarm
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> to show ALARM.
4. Press <MENU/OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
7.2.2 Set the Alarm Time (If Alarm time is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time in 24 hour format.
3. Press <OK> to display "SNOOZE".
4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.
5. Press <OK> to confirm.
3. Press <MENU/OK> and <UP/DOWN> to select ON/OFF.
<TALK OFF> to disable
the alarm, the display will revert to the call duration.
or ringing, the alarm will sound again at the end of the snooze period.
all Call list entries
alarm is sounding, to stop the alarm and turn off the snooze function.
19 20
in the format you set in Section 7.1.1.
7.3 Handset Settings
7.3.1 Set the Ringer Melody for Internal Calls
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS .
2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP
3. Press <MENU/OK> to show INT RING.
4. Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear
Note: The respective melody will be played while browsing the ringtone list.
5. Press <MENU/OK> to confirm.
7.3.2 Set the Ringer Melody for External Calls
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select EXT RING.
4. Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear
Note: The respective melody will be played while browsing the ringtone list.
5. Press <MENU/OK> to confirm.
7.3.3 Set the Ringer Volume
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select RING VOLUME.
4. Press <MENU/OK> and <UP/DOWN> to select the desired ringer volume (a
VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.
5. Press <MENU/OK> to confirm.
7.3.4 Set Alert Tones
Three different alert tones are set on by default, but can be turned off, if desired.
Key Tone - a single beep is emitted when you press a key.
you need to charge the handset batteries.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select TONE SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select KEY TONE /
4. Press <MENU/OK> and <UP/DOWN> to turn on or off these tones.
5. Press <MENU/OK> to confirm.
Out of Range Tone - emitted while you are talking on the phone to alert you to
move closer to the base unit, before the call is lost.
Low Battery Tone - emitted while you are talking on the phone to alert you that
BATTERY TONE / OUT OF RANGE.
7.3.5 Set the Handset Language
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select LANGUAGE.
3. Press <MENU/OK> and <UP/DOWN> to select the desired language.
4. Press <MENU/OK> to confirm.
7.3.6 Rename the Handset
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS
2. Press <MENU/OK> and <UP/DOWN> to select RENAME HS.
3. Press <MENU/OK> and change the name of your handset, using <C/MUTE> to
4. Press <MENU/OK> to confirm.
keys to enter up to 10 letters for the name.
7.3.7 Choose the Information to be Displayed in Idle
You can choose to display time or handset name in your idle screen.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select HS DISPLAY.
3. Press <MENU/OK> and <UP/DOWN> to select HANDSET NAME or TIME.
4. Press <MENU/OK> to confirm.
7.3.8 Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select AUTO ANSWER.
3. Press <MENU/OK> and <UP/DOWN> to turn on or off the auto answer feature.
4. Press <MENU/OK> to confirm.
the handset off the base or charger, without having to press any key.
7.4 Base Settings
7.4.1 De-register a Handset
This operation should only be necessary if one of your handsets becomes faulty
or lost and needs to be replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> and <UP/DOWN> to select DELETE HS.
3. Press <MENU/OK> and the display shows "PIN?----".
the antenna icon flashing and "REGISTER" on the display.
de-register a handset from the base station.A de-registered handset will have
4. Enter the 4-digit system PIN.
5. Press <MENU/OK> and the first handset number is displayed.
6. Press <UP/DOWN> to scroll through the list of registered handsets and
7. Press <MENU/OK> to confirm, and the chosen handset will be de-registered.
select the number of the handset
you want to de-register.
21 22
BS SETTINGS.
7.4.2 Change the dial mode
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.
3. Press <MENU/OK> and <UP/DOWN> to select TONE PULSE or
(The current setting is indicated by an asterisk to the right).
4. Press <MENU/OK> to confirm.
You should normally leave the dialling mode at its default setting of TONE (also
called DTMF) unless the phone is connected to an old exchange that only
Note: If PULSE dialling is set, you can press the * key to switch to TONE
recognises PULSE dialling.
7.4.3 Change the Flash (Recall) Time
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select your desired flash time
4. Press <MENU/OK> to confirm.
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms),
0ms) or LONG (600ms).
(SHORT, MEDIUM, LONG,
7.4.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorized use. The default
system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
3. Press <MENU/OK> and the display shows PIN? ---- .
4. Enter the old system PIN.
5. Press <MENU/OK> to display NEW PIN?---- , and enter your new 4-digit
6. Press <MENU/OK> to display CONFIRM?---- , and enter your new 4-digit
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press <MENU/OK> to confirm
7.5 Registration
You can register additional handsets to have up to five handsets per base unit,
with each handset's number (1 to 5) shown on its display. (Note: each handset
1. Press and hold <FIND> on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration mode
To register a new handset to your base:
within this time.
2. Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.
3. Press <MENU/OK> to display PIN?---- .
4. Enter the 4-digit system PIN (default 0000).
5. Press <MENU/OK> to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
handsetregistration is unsuccessful, the <antenna icon> will still flash and the
7.6 Reset Your Phone
You can reset your phone to the default settings . After a reset, all your
1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.
2. Press <MENU/OK> to display PIN?---- .
3. Enter the 4-digit system PIN (default 0000).
4. Press <MENU/OK> to display CONFIRM?
5. Press <MENU/OK> to confirm, and the phone will be reset to its default
can only be registered to one base.)
for about 1 minute, so the following handset sequence must be completed
30
with the current setting indicated by and asterisk
to the right).
IMPORTANT: When you purchase a phone system, all handsets are already
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
messages will be deleted but your phonebook remains unchanged.
ANSWERING MACHINE
Your phone includes a telephone answering machine that records unanswered
calls when it is on.The answering machine can store up to 59 messages within
incoming messages,you can record memos for other users of your phone.
alternately with the handsets name or time, depending on the handset standby
display mode set (see section 7.3.7), and you will have to delete some
the maximum recording time of approximately 15 minutes. As well as recording
8
messages before any new ones can be recorded.
MEDIUM (
the <antenna icon> will stop flashing.
registered to your base, so you do not need to register them.
personal settings, call list entries, redial list entries, and answering machine
23 24
display will return to REGISTER, so you will need to repeat the registration
dialling for the rest of that call.
process.
If the answering machine memory is full, the Handset will display TAM FULL
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM ON/OFF.
3. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.
4. Press <MENU/OK> to confirm.
¾If answering machine is set to ON, <TAM ON icon> displays on the
¾If answering machine is set to OFF, <TAM ON icon> will not display on the
handset LCD.
When new messages are recorded on the answering machine, the <TAM icon>
flashes on the handset display until all the new messages are played.
After a new message is played it will be saved as an old message
Old messages will be played after all new messages are played completely.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> to showt MSG PLAYBACK.
3. Press <MENU/OK> to start message playback through the earpiece and the
Note: A <STAR icon> is placed at the centre of the bottom of the handset
When a message has been played, the <STAR icon> will disappear and will
You can turn the answering machine on or off using the handset.
When the answering machine is set to ON, calls will be answered after the
set answer delay and the caller can then leave you a message.
When the answering machine is set to OFF, calls will be answered after 14
8.1 Turn On/Off the Answering Machine
Note: If there are no messages, the handset display will briefly show
then return to MSG PLAYBACK.
4. During message playback, press <UP> or <DOWN> to increase or decrease
the message playback volume respectively.
5. Press <MENU/OK> and <UP/DOWN> to select STOP, FORWARD,
PREVIOUS, DELETE to perform the following functions during message
STOP: Stop the current message playback and return to the
ANS. MACHINE
menu.
FORWARD: Skip to play the next message. The date and time information
of the next message will display if there is another message.
PREVIOUS: Repeat playing the current message from the beginning.
The date and time information of the current message will display.
"00-00 00-00"
DELETE: Delete the current message and the next message will be played.
Note: Alternatively, you can use the following shortcut keys to control different
Press <Key 5> to stop message playback.
Press <Key 4> once to restart the current message from the beginning. Press
Press <Key 6> to skip forward to play the next message.
Press <Key 2> to delete the current message being played.
operations during message playback.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
3. Press <MENU/OK> to display CONFIRM?
4. Press <MENU/OK> to delete all old messages.
Note: If there are no more messages in the answering machine, "EMPTY "will
display and return back to ANS. MACHINE menu.
You can record your memo message for another user. When you record a memo,
messages. Memo recording can still function even when the answering machine
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select MEMO.
3. Press <MENU/OK> to start memo recording and “RECORDING
” is
4. Press <MENU/OK> to stop memo recording. The memo will play back for
OR
4. Press <C/MUTE> to stop memo recording without saving and return back to
ANS. MACHINE menu.
You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
8.3 Delete All Messages in the Answering Machine
8.4 Record Memo
8.5 Answering Machine Settings
not be able to leave you a message.
handset LCD.
automatically unless it is deleted.
not be shown when you listen to this message again.
25 26
screen displays the date and time information of the message received.
Some answering machine functions can be operated from the base, including
playing messages and turning the answering machine on or off. See section
"3.2 Base Station with Telephone Answering Machine (TAM) Control" for further
details of button operations.
The answering machine can also be controlled and set up using the
handset menu functions, as below.
is turned off.
twice to skip backward to play the previous message.
By default, the answer machine is set in ANS & REC mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> to show ANSWER MODE.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> to confirm.
The answering machine announces the outgoing message when it answers a call.
There is a pre-set OGM for each of mode or ANSWER ONLY
You can record your own OGM for ANS & REC mode or ANSWER ONLY mode.
When you record your own OGM, it will be used when the answering machine
answers the call. If your personal OGM is deleted, the pre-set OGM will be
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> and <UP/DOWN> to select RECORD MESS.
restored automatically.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select TAM LANGUAGE.
4. Press <MENU/OK> and <UP/DOWN> to select your desired OGM language.
5. Press <MENU/OK> to confirm.
6. Press <MENU/OK> to start recording your personal OGM and “RECORDING”
7. Press <MENU/OK> to stop and save your personal OGM. Your newly saved
OGM will playback automatically.
Alternatively, press <C/MUTE> to return to the previous screen without
is displayed on the screen.
When your answering machine memory is full and the answer mode is in ANS
It will return toANS & REC mode automatically after some messages have
,the answer mode will change to automatically.ANSWER ONLY
been deleted.
ANS & REC
OGM during playback and record a new one whenever you want.
Please note that pre-set OGM cannot be deleted.
You can playback your own personal OGM or the pre-set OGM for ANS &
REC mode or ANSWER ONLY mode and choose to delete your personal
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> and <UP/DOWN> to select PLAYBACK.
6. Press <MENU/OK> to playback your current OGM and
is displayed on the screen.
7. Press <MENU/OK> to stop the OGM playback and return to the previous
menu.
Note: If a personal OGM has not been recorded, the pre-set OGM will be
1. Repeat Steps 1 to 6 in Section 8.5.4.1
2. Press <C/MUTE> while the OGM is playing to delete your personal OGM and
return to the previous menu and the pre-set OGM is restored automatically.
Note: If the pre-set OGM is playing, you are not allowed to delete it, so
You can set the number of rings before the answering machine answers and
starts playing your OGM. You can set the answering machine to answer after
two to eight rings or TIME SAVER.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select ANSWER DELAY.
4. Press <MENU/OK> and <UP/DOWN> to select from 2 RINGS, 4 RINGS,
5. Press <MENU/OK> to confirm.
will answer after 4 rings if there are no new messages, or after 2 rings if there
is a new message, so if you call in and you don't get an answer after 2 or 3
rings, you can hang up and save on call charges.
"PLAYING OGM"
You can set the maximum length of the recording time for each incoming
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE
.
played.
pressing <C/MUTE> will just stop the playback and return to the previous menu.
mode, which can only be in English or French (Francais) on this model.
& REC
does not allow callers to leave a message. In that case, your callers will be
prompted to call back later.
27 28
If Time Saver is set the answering machine
6 RINGS, 8 RINGS or TIME SAVER.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.
4. Press <MENU/OK> and <UP/DOWN> to select from 60 S, 120 S, 180 S or
5. Press <MENU/OK> to confirm.
Three different compression rates (HIGH, MEDIUM and LOW) are provided for
rate, the higher the recording quality level attained, but the
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select COMPRESSION.
4. Press <MENU/OK> and <UP/DOWN> to select your desired compression
rate.
5. Press <MENU/OK> to confirm.
Your phone lets you check your messages, or otherwise operate your
When the answering machine is on and takes a call, you can listen to the caller
If the answering machine is set to ON, when there is an incoming message,
“SCREENING?”
1. Press <MENU/OK> to start call screening. Any handset can listen to who is
2. The handset will display “SCREENING”.
3. You can adjust the earpiece volume by pressing <UP or DOWN>.
OR
3. Press <C/MUTE> to return to previous screen and you cannot hear the
recording.
At any time if you want to pick up the call, you can press <TALK ON> and
the message recording will be stopped automatically. If the answering
the call in person.
you to select different quality levels of recording incoming message. The lower
the compression
machine is in the process of recording, the message already stored will be
saved.
leaving the message and decide whether to pick up the call or not.
Functions
Keys
While message is playing
2
Delete the current message playing.
4
Repeat playing the current message
5
Play the message Stop the current message playback
6
Skip to play the next message
7
8
Stop the current message playback
9 Turn off the answering machine
from the beginning. Press twice to
skip backward to play the previous
message.
Turn on the answering machine
While message is not playing
shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10
minutes, HIGH=15 minutes approx).
29 30
leaving a message. You can then identify the caller and decide whether to take
it will automatically be played through the base station, but you also have the
option to listen through the handset which will display
The 4-digit remote access PIN code is used to prevent other people from
unauthorised access of your answering machine.
message to be 60, 120, 180 seconds or unlimited up to the total recording time
remaining on the answer machine.
answering machine, by calling the answering machine when you are away from
home and then dialling a 4-digit remote access PIN from a tone-dialling phone.
UNLIMITED.
Problem Causes Solutions
No dialling tone when
pressing <TALK ON>
a.The connection cord of
the base station is not
plugged in.
b.The adapter cord is not
plugged in correctly in
the base station.
c. Another handset is using
the base to make a call.
d. Wrong telephone line cord
a.Check the connections. Unplug
and plug back in the mains.
Check that the telephone cord
has been plugged into the base
station and the phone socket.
b.Check the base station plug and
the 230V plug (remove and plug-in).
c.Wait until the line is unoccupied.
d.Use the original telephone line
cord supplied
When connect to a PBX,
no and/or wrong connection
after dialling.
Dialling prefix is needed. Insert the dialling prefix
"SEARCHING" is displayed. a. Base station out of
range.
b. Base station not
connected to mains.
Reduce the range.
Connect base station to
mains.
The call does not work. Service not activated or
wrong setting
Check your Subscription with
network or change the dial mode.
No display. Empty battery Recharge battery
key
Technical Support
If the fault persists...
Disconnect all other instruments connected to the same line as the phone
Disconnect the base unit from the telephone line and plug a different phone
This telephone is not equipped with a grounding function
used in PBX systems.
system and try to make a call.
, and therefore some
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
4. Press <MENU/OK> to display PIN? ----, and then enter the current PIN
5. Press <MENU/OK> to display NEW PIN? ----, and then enter your new
6. Press <MENU/OK> to display CONFIRM? ----, and then enter your new
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press <MENU/OK> to confirm the new PIN.
4. Press <MENU/OK> and <UP/DOWN> to select ON or OFF to turn the
5. Press <MENU/OK> to confirm.
You can ring your phone from another tone-dialling phone to switch the
answering machine on or off, and/or listen to your messages remotely.
1. Place a call from a tone-dialling phone to your phone.
2. When the answering machine answers the call and starts playing the OGM,
Note: The * must be entered while the OGM is still playing, and the 4-digit PIN
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
Note: If the 4-digit Remote Access PIN is entered incorrectly you will hear three
consecutively, the line will be released automatically.
4. Press the following keys to carry out your desired function.
press the < * > key. The OGM will stop playing.
should be follow without any delays.
)XQFWLRQV
.H\V :KLOHPHVVDJHLVQRWSOD\LQJ :KLOHPHVVDJHLVSOD\LQJ
 'HOHWHWKHFXUUHQWPHVVDJHSOD\ing
5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH
IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS
EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH
 3OD\WKHPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
 6NLSWRSOD\WKHQH[WPHVVDJH
 7XUQRQWKHDQVZHULQJPDFKLQH
 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
 7XUQRIIWKHDQVZHULQJPDFKLQH
Note: If your answering machine is switched off, the phone will enter into the
remote access mode after 14 rings and play the Answer Only OGM.
You can then enter the <KEY *> and the 4-digit remote access PIN (Default)
Remote Access PIN is 0000) to activate the remote access feature.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select REMOTE ACC.
9 TROUBLESHOOTING
Answering Machine
The unit does not record
new messages. The answering machine is
turned off. Turn on the answering machine.
The caller cannot leave a
message. a. The answering machine
is turned off.
b. Message memory is full.
a. Turn on the answering machine.
b. Erase unnecessary messages.
I cannot operate the
answering machine
remotely.
a. You are entering the
wrong remote access code
b. You are pressing the dial
keys too quickly.
c. You are using a pulse
telephone.
a. If you forget the remote access
code, reset to the default settings.
b. Press each key firmly.
c. Try again using a touch tone phone
While recording an outgoing
message or listening to
messages, the unit rings
and recording stops.
A call is being received. Answer the incoming call
and try again to record your
out going message later.
c. ANSWER ONLY mode is set. . Change to ANS c & REC mode.
remote access on or off respectively.
31 32
To allow remote access this option must be turned ON, but you can turn it OFF
to prevent any remote access at all.
When your answering machine memory is full and the answer mode is set to
Answer & Record, the answer mode will change to Answer Only automatically.
It will change back to Answer & Record mode automatically after some
4-digit PIN code again.
4-digit PIN code.
(Default 0000).
messages have been deleted.
into the master telephone socket.
DECLARATION OF CONFORMITY
UK (A rgos) Ver, S ep.201 0
Try making a call. If this works, the line is OK.
If the cal l does not work, and you are using a two-way socket adapter, remove
it and plug a telephone directly into the socket. If the cal l now works, the adapter
may be faulty.
11
We the manufacturer / Importer : Binatone Telecom Plc,1 Apsley Way London, NW2 7HF.
Declare under our sole responsibility that the following product
Type of equipment: Digital cordless telephone
Model Name:
Country of Origin: China
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on
the approximation of the laws of the Member States relating to
Radio Spectrum Matters
,
Statesrelating to electromagnetic compatibility (EMC) and the European Community
Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the
essential requirements according to Article 3 R&TTE was based on Annex III of the
Directive 1999/5/EC and the following standard:
Radio Spectrum: EN 301406: V2.1.1(2009-07)
EMC: EN 301489-6:V1.3.1(2008-08)
EN 301489- :V1. .1(2008-0 )
Electrical Safety: EN 60950-1:2006+A1: 2009
Manufacturer / Importer
(signature of authorized person)
Date Signature
Binatone
The conformity to the requirements is validated by the symbol.
NOTE: In compliance with Directive 2002/96/EC, when you purchase a product
that comes with the symbol shown on the right, you are required to dispose of
electrical and electronic equipment by separate waste collection and you
cannot dispose of the product as normal waste.
This equipment
and all its components, subsystems and consumable materials
formed an integral part of this product and when you decide to dispose
takethem to a local recycling centre for
appropriate waste disposal, in compliance with the current regulations.
Details about the location of these centres can be obtained from
your local authority.
of them you have to
1520 Series
Notes for battery disposal
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be disposed of with normal household waste.
Please be aware of the local rules on separate collection of batteries. The
correct disposal of batteries helps protect the environment and prevent health
10
hazards.
33 34
This product is guaranteed against manufacturing defects for a period of 1 Year.
This does not cover the product where the fault is due to misuse, abuse,
use in contravention of the instructions, or where the product has been
subject of commercial use.
In the event of a problem with the product within the guarantee period please
PRODUCT GUARANTEE
the subject of unauthorised modifications or alterations, or has been the
return it to your nearest Argos store.If the item is shown to have had an
inherent defect present at the time of sale, the store will provide you with
a replacement.
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
the Council Directive 2004/108/EC on the approximation of the laws of the Member
2010
of the functions may be limited when
Veva
6.4
If the date has been set before, the current date will display, otherwise,
7.2 Alarm Settings
Record Your Own Outgoing Message (OGM)
8.5.3
Playback and Delete the Outgoing Message (OGM)8.5.4
Playback the OGM8.5.4.1
Delete a Personalised OGM8.5.4.2
Set the Answer Delay8.5.5
Set the Recording Time of Incoming Message8.5.6
Call Screening8.5.7
Set the Answer Mode8.5.1
Set the Outgoing Message (OGM) Language8.5.2
display to indicate that it is a new message.
8.2 Listen to the Messages in the Answering Machine
8.5.8 Change the Compression Rate
8.5.9 Activate Remote Access
8.5.9.1 Change the 4-Digit Remote Access PIN
8.5.9.2 Activate or Deactivate the Remote Access
8.5.9.3 Access Your Answering Machine Remotely
5 Dec
1 8 4
for internal calls.
total of 6 ringer volume levels including
for external calls.
delete letters and the alphanumeric
system PIN again.
system PIN.
saving the personal OGM.
you to check. Press <MENU/OK> or leave the memo to finish playing, to
save the message.
displayed.
the message can be played back in the same way as answering machine
playback.
settings.
rings and the answer only message will be played to your callers. They will
error beeps, and you can try again, but if it happens three times.
You will hear a single confirmation beep if the PIN is accepted, and you then
need to press 5 to start playing any messages.

Product specificaties

Merk: Binatone
Categorie: Telefoon
Model: Veva 1520

Heb je hulp nodig?

Als je hulp nodig hebt met Binatone Veva 1520 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Telefoon Binatone

Binatone

Binatone Caprice 600 Handleiding

22 Mei 2023
Binatone

Binatone IDECT X5i Handleiding

2 Mei 2023
Binatone

Binatone Solas 1500 Handleiding

28 April 2023
Binatone

Binatone iDECT Freedom Handleiding

28 April 2023
Binatone

Binatone Lyris 410 Handleiding

10 April 2023
Binatone

Binatone IDECT Eclipse Plus Handleiding

9 April 2023
Binatone

Binatone Trend 2 LCD Handleiding

4 April 2023
Binatone

Binatone Lifestyle 1910 Handleiding

25 Maart 2023
Binatone

Binatone E3300 Twin Handleiding

25 Maart 2023
Binatone

Binatone MD 2000 Handleiding

23 Maart 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

EMeet

EMeet OfficeCore M2 Handleiding

19 November 2024
Geemarc

Geemarc Serenties Handleiding

17 November 2024
Auerswald

Auerswald COMpact 4000 Handleiding

17 November 2024
Auerswald

Auerswald COMfortel 1200 Handleiding

17 November 2024
Akuvox

Akuvox MD12 Handleiding

17 November 2024
MyPhone

MyPhone Metro+ Handleiding

16 November 2024
Ranex

Ranex RX 6023 Handleiding

16 November 2024
SPC

SPC AIR Handleiding

16 November 2024
Pixel

Pixel M80 Handleiding

16 November 2024
Pixel

Pixel Voical Air 2 Handleiding

16 November 2024