Binatone Solas 1500 Handleiding

Binatone Telefoon Solas 1500

Lees hieronder de 📖 handleiding in het Nederlandse voor Binatone Solas 1500 (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

EMERGENCY TELEPHONE CALLS WHEN THE POWER

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully. 1 2

1 IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

sink, swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

6) Unplug this product from the wall outlet and refer servicing to our Repair

• When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

• If the product has been dropped and the cabinet has been damaged.

• If the product exhibits a distinct change in performance.

7) NEVER use your

8) Do not use the telephone to report a gas leak in the vicinity of the leak.

9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation

periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or damage to the unit

or surroundings. The manufacturer will not be held liable for damage arising

from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the batteries are inserted in the correct polarity.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put

them where they could get punctured.

Centre under the following conditions:

following:

3 GETTING TO KNOW YOUR PHONE

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

(BACK)

(INT)

Indicates when there are more characters or numbers in front of those

Indicates when there are more characters or numbers after those being

Press the MENU/OK key to access the main menu.

Press the MENU/OK key to confirm the current selection.

Indicates a new Call List entry is being

Press the C/MUTE key to start an intercom call.

Press the C/MUTE key to go back to the previous menu level or cancel

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

being displayed.

displayed.

the current action.

the microphone during a call.

3.4 Menu Structure

In idle mode, press <MENU/OK>

Refer to the following for the menu structure.

8 9

3.5 Text and Digit Entry Table

The following table shows you where each letter and punctuation character can

be found, by using repeated presses of the alphanumeric keypad. This will be

helpful when storing a name in the phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry position.

It is positioned at the right of the last character entered.

Writing Tips:

1. Once a character is selected, the cursor will move to the next position after a

short pause.

2. You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3. Press <C> to delete the last character.

4. Press and hold <C> to delete the entire text string.

4.3 End a Call

During a call press <TALK OFF> to end the call.

Put the handset on the base station or charger to end the call.

1211 13

4.4 Adjust Earpiece Volume

During a call:

setting is shown.

When you end the call, the setting will remain at the last selected level.

4.5 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.

During a call:

Press <C> to mute the microphone and “MUTED” will display on the LCD.

Your caller cannot hear you. Press <C> again to unmute the microphone.

4.6 the

In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER

OFF”

icon is displayed on the LCD.

4.7 Turn on the Keypad Lock

In idle, press and hold <STAR/*> to turn on the keypad lock. The

4.8 Redial the last number

You can redial any of the 5 last numbers called. If you have stored a name in

the phonebook to go with the number, the name will be displayed instead.

4.8.1 Redial a Number from the Redial List

1. ress <

Note: If the redial list entry shows a name, press <Hash/#> to view the number

2. Press <UP/DOWN> to browse the redial list.

3. Press to dial to the selected redial number.<TALK ON>

Note: If there are no numbers in the redial list, the display shows

“EMPTY ”.

4.8.2 Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select ADD TO PB.

3. Press <OK> and then enter the name you want to use in the phonebook.

4. Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will

be played when browsing the ringtone list. (Note: the selected melody will

7. Press <OK> to confirm, and the entry will be stored.

Note: The display will still flash the Call icon and show CALL or the Caller Display

number, when there is an incoming call, even if the ringer is turned off

To turn the ringer back on, press and hold <HASH/#> again.

Note: You can still use to answer a call<TALK ON>

To turn the keypad lock off, press and hold <STAR/*> again.

only be played if you subscribe to Caller Display and the incoming number

icon is displayed on the LCD.

The most recent last number will display at the top of the redial list.

of this entry.

matches the stored number.)

4.8.3 Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm, and the entry will be deleted.

4.9 Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the

handsets registered to the base will produce the paging tone and show

4.8.4 Delete all Redial List entries

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE ALL

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note: If there is an incoming call during paging, the phone will ring with the

4.10 Make an Internal Call (For ) multi-handset versions only

This feature is only applicable when there are at least two registered handsets.

It allows you to make internal calls, transfer external calls from one handset to

incoming call instead of paging.

LOCK”

"PAGING" on the display. You can stop the paging by pressing <TALKON>/

another handset and make conference calls. If the called handset is not

answered within 60 seconds, the called handset will stop ringing and the calling

Note: If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display “NOT POSSIBLE”

4.10.1 Intercom Another Handset

1. In idle mode, press <C/MUTE/INT>

and all the other registered handset

2. Enter the number of the handset that you want to call, or enter "9" to call all

3. The called handset rings and must be <TALK ON>

Note: If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

numbers will display, along with a "9".

to establish the intercom call.

4.10.3 Transfer an External Call to another handset

During an external call:

1. Press <MENU> and <UP/DOWN> to select INTERCOM

2. Press <OK> to show all the other registered handset numbers, plus "9".

3. The external call is put on hold automatically and the called handset rings.

4. Press on the called handset to establish<TALK ON>

Enter the number for the handset you want to transfer the call to.

handset will return to standby mode.

handsets.

5. Press <TALK OFF> on the calling handset or put the calling handset on the

charging cradle to end the current call with the external party.

6. The external call is transferred to the called handset.

4.10.2 Call All Handsets

1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press to ring to all registered handsetsdigit key <9>

4.10.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two

handsets (in intercom).

The three parties can share the conversation and no additional network

subscription is required.

During an external call:

1. Follow Steps 1 to 4 in section 4.10.3.

2. Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the

other handset still connected to the external call.

5 PRIVATE PHONEBOOK

15 16

pressed on that handset

an internal call.

handset is ringing.when the

near water (for example, near

a bath tub, kitchen

Keep your

se this product and don't let it get wet or u

base from the telephone line and the mains socket when there are storms

in your area. Damage caused by l ightning is not covered by the guarantee.

to go to CALL LIST, the first option in the menu list.

Press <UP> or <DOWN> to go to other options in the menu list.

Press <MENU/OK> to enter a sub-menu or function.

Press <C/MUTE> to go back to the previous level.

ress <UP/DOWN> to select volume 1-5. The current

Turn off Handset Ringer

Note: If there is an external call while you are on an intercom call, you'll

hear warning beeps, and you have to end the intercom all, before you can c

answer the external call.

Note: If the other handset has not answered the intercom call, you can stop

the intercom and return to the external call by pressing <TALK OFF>

TECHNICAL DETAILS

Standard

Frequency range

Channel bandwidth

Operating range

Operating time

Temperature range

Digital Enhanced Cordless

Telecommunication (DECT)

1.88 to 1.9 GHz

1.728 MHz

Up to 300m outdoors; up to 50m indoors

Standby: 100 hours, Talking:

10 hours

Battery charge time:15 hours

Operating 0 C to 40 C

(bandwidth = 20 MHz)

Port specification The port (connec ted to the mains power supply) is a

SELV port with respect to EN41003.

CLEANING AND CARE

Do not clean any part of your phone system with benzene, thinners or other

solvent chemicals - this may cause permanent damage which is not covered by the

Guarantee.

When necessary, clean it with a damp cloth.

Keep your phone system away from hot, humid conditions or strong

and don't let it get wet.

Every effort has been made to ensure high standards of reliability for your

do not try to

, Storage -20 C to 60 C

Caution

Risk of explosion if battery is replaced by an incorrect type

Dispose of used batteries according to the instructions.

The port (connected to the telephone line) is aTNV port with respect to EN41003.

repair it yourself

sunlight,

, consult your supplier or the Helpline.

Main

Menu CALL LIST PHONEBOOK BS

SETTINGS

SETTINGS REGISTRATION DEFAULT

Sub

ADD TO PB

DELETE

DELETE ALL

phonebook Entry.

ADD

VIEW

EDIT

DELETE

DELETE ALL

PB STATUS

DELETE HS

DIAL MODE

FLASH TIME

ALARM

RING SETUP

TONE SETUP

LANGUAGE

RENAME HS

HS DISPLAY

AUTO ANSWER

DATE & TIME

PIN? - - - - PIN? - - - -

Key Press

<MENU> <UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

Shows EMPTY

or the first Call

List Entry. Then

<OK> for:

Shows EMPTY

or the first

Then <OK> for:

ADD

PB STATUS

CHANGE PIN

DETAILS

Each handset can store up to 20 private phonebook entries with names and

numbers. Each phonebook entry can have a maximum of 20 digits for the

phone number and 12 characters for the name. You can also select different

ringtones for your phonebook entries. (Note: the different ringtones only play if

5.1 Add a New Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <MENU> to show ADD.

3. Press <OK> and then enter the name.

4. Press <OK> and then enter the number.

5. Press <OK> and <UP/DOWN> to select the desired ringtone for your

6. Press <OK> to store the phonebook entry.

you subscribe to Caller Display and the incoming number matches the stored

number.) Phonebook entries are stored alphabetically by name.

phonebook entry.

5.2 Search for a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

2. Enter the first letter of the name using the alphanumeric keys(e.g. if it

want.

5.3 View a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select VIEW.

4. Press <OK> and <UP/DOWN> to review the name, number and ringtone

of the selected phonebook entry.

Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or

<RIGHT SOFT KEY> to view the remaining digits.

and then <UP/DOWN> to scroll to the entry you

begins with C, press the 2 key th ree tim es),

<OK> to access the phonebook.

5.4 Edit a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select EDIT.

4. Press <OK> to display the current name.

5. Edit the name and press <OK>.

6. Edit the number and press <OK>.

7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.

5.5 Delete a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select DELETE

4. Press <OK> to confirm, and the entry will be deleted.

5.6 Delete all Phonebook entries

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

Press <MENU> and <UP/DOWN> to select DELETE ALL.

Press <OK> to display <CONFIRM?>.

Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

5.7 Check the Phonebook Usage

You can check how many phonebook entries are stored in your handset and

how many phonebook entries are available for you to store in the phonebook.

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

to access the phonebook.

2. Press <MENU> and <UP/DOWN> to select PB STATUS.

3. Press <OK> to display how much of the phonebook is being used,

for example means 6 entries are stored out of the < 6/ USED>

total available spaces.

<OK>

<OK> to access the phonebook.

<OK>

If the call is from someone who withheld their number, e.g. by dialling 141,

will display.

If the call is from someone whose number is unavailable, e.g. an international

call or from a private exchange, will display. “OUT OF AREA”

If you've got new Caller Display records, the handset will display "X NEW

6.1 View the Call List

All received calls are saved in the Call List,

When the call list is full, the oldest call will be replaced by a new call. Any

unanswered calls which have not been viewed are marked with a

<*> icon at the

CALLS" in standby mode. The New Calls indication will remain until all the new

call records have been viewed on that handset.

centre of the bottom line of the display.

1. Press <UP> to access the call list.

OR Press <MENU> and <UP/DOWN> to show CALL LIST, then press OK.

2. Press <UP/DOWN> to select the desired entry.

3. Press <#> to view the caller’s number if applicable.

6.2 Store a Call List Number into the Phonebook

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to show ADD TO PB.

3. Press <OK> and then enter the name.

4. Press <OK> and the selected call list number is displayed.

5. Edit the number if necessary.

6. Press <OK> and <UP/DOWN> to select the ringtone.

7. Press <OK> to store the phonebook entry and return to the calls list.

4 . Press <MENU>, <UP/DOWN> to show , and then <OK> to display DETAILS

the date and time of the call. Press <OK> to go back to the previous screen.

“WITHHELD”

6 CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed to the Calling Line Identification

service with your network service provider. Your phone can store up to 10

received calls with date/time information in the Call List. The number will be

shown on the handset display when the phone is ringing. If the number matches

with one of the entries in your Private Phonebook, the caller’s name stored in the

private phonebook will be displayed alternately with the number, and the

handset will ring with the ringtone associated with that phonebook entry.

with the latest call at the top of the list.

2 INSTALLING YOUR PHONE

2.1 Connecting the base station

1) Plug the power supply and line cord

2) Plug the power adapter into a 230Vac,

3) Always use the cables provided in the box

Warning: Use only the provided adaptor, using

other power supplies may cause a hazard.

50Hz mains socket, and the line cord into your

2.2 Installing and charging the batteries

1) Place the into the battery 2 supplied batteries

3) Put the handset on the base and charge for

15 hours before using the handset for the first time.

If yo u ha v e a Broadband line

If you connect your telephone to a line with

insert a micro-filter between the telephone

and the telephone line, otherwise you may get

interference between the telephone and the broadband,

which could cause problems.

a broadband connection, you will need to

telephone line socket.

Warning: Install the base unit in a position where

mains power cable.

Note: The base unit needs mains power for normal

operation, not just for charging the handset batteries.

Use only the NiMH rechargeable battery type

2) Position the battery compartment cover over the

In a home with broadband, every telephone must have a micro-filter connected,

not just the one at the telephone point that your modem is connected to.

If you need more broadband micro-filters, contact your broadband supplier.

compartment with the polarity markings as shown

The handset will give a beep when it is properly

into the base station.

batteries and slide up to click into place.

placed on the base or charger.

the mains adapter plug will reach an easily

accessible mains socket. Never try to lengthen the

provided.

Indicates you can scroll up / down the menu items / Phonebook list /

Steady when the handset is in range of the base. Flashes when out of

Steady when an intercom call is in progress.

Flashes when there is an incoming internal call.

Indicates a call is in progress on that handset.

Indicates that the ringer is switched off.

Steady when an alarm is set. Flashes when the alarm is sounding.

Indicates that the keypad is locked.

Indicates when you have a new Voice Mail message.

(This is a Caller Display service and is not usually available from

range of the base or not registered to the base.

UK network providers.)

Indicates when the battery is fully charged.

Whole icon flashes when the battery s charging.

Internal block icon flashes when the battery is in final charging stage.

handset

Flashes when there is an incoming external call.

3.5.1 Character Set

Key

Press 1st 2

3rd 4th 5th 6th 7th 8th 9th 10th

1 space - 1 1

2 A B C 2 2

3 D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0, or P (Pause) if press and hold

** ? / \ ( ) *

Alphanumeric Editing

(For phonebook name editing and renaming handset )

Number Editing (For phone

number editing,date/time editing)

# o ' , - , &

Note: There are some different characters if the handset language is changed

(page 20).

4 USING YOUR PHONE

4.1 Make a Call

4.1.1 Preparatory Dialling

Enter the phone number and press <TALK ON>

to dial the number. When entering the number, if you make a mistake,

to delete digits.

4.1.2 Direct Dialling

Press to connect to the line and then<TALK ON>

4.1.3 Call from the phonebook

Press to access the <MENU/OK>, then <DOWN>, then <MENU/OK> again

phonebook and press <UP/DOWN> to

Press to dial out the selected phonebook entry.<TALK ON>

(Note: if you enter a wrong digit you cannot correct it with the <C> key.)

select the desired phonebook entry.

4.1.4 Call from the Call List (only available with Caller Display)

Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Press to dial out the selected Call List entry.<TALK ON>

Note: You can also access the Call List by pressing <MENU/OK> twice.

4.1.5 Call from the redial list

Press <DOWN> to access the redial list and press <UP/DOWN> to select the

Note: The alphanumeric keys provide a short-cut to find entries beginning with

the corresponding letters.

Call List entry.

desired redial number.

Press to dial out the selected redial number. <TALK ON>

4.1.6 Call timer

Your handset automatically times the duration of every call.

The call timer is displayed as soon as you answer a call or 15 seconds after

It is shown in hours, minutes and seconds

4.2 Answer a Call

If the handset is not on the charging cradle:

When the phone rings, press to answer a call. <TALK ON>

Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

charger will answer the call automatically, and no buttons need to be

format (HH:MM:SS).

pressed.

enter the phone number.

press <C>

dialling and remains on the screen for 5 seconds after the end of the call.

to connect to the line and

3.2 Base Station Overview

Press the Page button on the base

station to page your handset(s).

It will ring for approximately 60 seconds.

2. CHARGING CRADLE

3.3 Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.

Press and hold to put base into registration mode.

1. PAGE < >

Electrical power

TenPao - S004LB0600030/S004LV0600030 -

Charger unit:

TenPao - S004LB0600030 / S004LV0600030 -

Battery Information

Base unit:

input 100-240VAC 50/60Hz 150mA, output 6VDC 300mA

USER GUIDE

**Please note that all calls are charged at local rate

www.binatoneonline.com

or visit our website:

Binatone Helpline (for UK only)

Monday to Friday from 9:00am to 5:00pm

Tel: 0845 345 9677

displayed.

Redial list / Call List

Solas 1505 system. However, if something does go wrong, please

phone away from hot, humid conditions or strong sunlight,

phone outdoors during a thunderstorm-unplug the

Package contents

The package contains the following items:

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 2 AAA rechargeable batteries

• 1 User manual

Note: If you have a Twin, Triple or Quad system, you will also have the requisite

extra handset(s) and batteries, and a charger pod for each extra handset.

Handset - Base Connection

1) When purchased, all handsets are already registered to the base unit and should

link to it when they are all powered up.

2) To use your cordless handset and base unit together, you must be able to

establish a radio link between them. The signal between the handset and the base is

> Any large metal object, such as a refrigerator, mirror or filing cabinet, between the

handset and the base unit may block the radio signal.

> Other solid structures, like walls, may reduce the signal strength.

> Other electrical equipment may cause interference and/or affect the range.

3) Do not place close to another telephone, a TV or audio equipment - it may cause

interference.

4) Out of Range warning. If you hear a warning tone during a call, and/or the sound

in the earpiece becomes faint or distorted, you may be going out of range of the base

unit, so move nearer to the base unit within 20 seconds, otherwise the call may be

cut off.

to 300 metres outdoors or 50 metres indoors. Be aware that:

in accordance with the normal standards for a DECT phone: Maximun range up

Connection and Conditions for use:

You can connect your phone to a direct exchange line (DEL) on a local

exchange with its own phone number; to an extension socket connected to a

DEL; or to an extension on an approved compatible PBX. Do not connect as an

extension to a payphone.

The ringer equivalence number (REN) of all equipment (phones, fax machines,

modems, etc.) connected to an exchange line must not add up to more than 4,

otherwise one or more of them may not ring and/or answer calls correctly. This

phone has a REN of 1, and most other elephones have a REN of 1 unless

marked otherwise.

3.1 Handset Overview

2 LEFT SOFT KEY( /OK)

Use with icons on display above, to

open menu and conﬁrm options.

Make or answer calls

Use with icons on display above, to

8 R - RECALL (also called Flash)

Sends a recall (R) signal, used for some PBX / Calling Features.

7 TALK OFF

End a call or return to previous menu.

1 UP

From idle: access the Call List

Press and hold to turn the handset on / oﬀ.

In lists: move up the options

During calls / ringing: increase the volume.

menu, mute the microphone or make

3 TALK ON

(CLEAR/BACK/MUTE/INTERCOM)

6 RIGHT SOFT KEY

clear characters, go back to previous

an intercom call.

GPI - VT

BYD - H-AAA400A 2 x 1.2V AAA size 400mAh NiMH

40AAAHC 2 x 1.2V AAA size 400mAh NiMH

Digital Cordless Telephone

Solas 1505

Solas 1505 Twin

Solas 1505 Triple

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece

volume .

CHARACTER SET3.5.1 .....................................................................................................

TABLE OF CONTENTS

1IMPORTANT SAFETY INSTRUCTIONS..........................................................

INSTALLING YOUR PHONE

............................................................................ 5

2.1 .......................................................................... 5

2.2 ...................................................... 5

GETTING TO KNOW YOUR PHONE................................................................ 6

3.1

HANDSET OVERVIEW

................................................................................................ 6

3.2

BASE STATION OVERVIEW

.......................................................................................

3.3

DISPLAY ICONS AND SYMBOLS

............................................................................... 7

3.4

MENU STRUCTURE

....................................................................................................

3.5

TEXT AND DIGIT ENTRY TABLE

................................................................................ 9

4 USING YOUR PHONE .....................................................................................

4.1 MAKE A CALL............................................................................................................10

4.1.3

CALL FROM THE PHONEBOOK

.............................................................................10

4.1.4 CALL FROM THE CALL LIST(ONLY AVAILABLE WITH CALLER DISPLAY)

...............................................................................4.1.5

CALL FROM THE REDIAL LIST

4.1.6

CALL TIMER

.............................................................................................................10

4.2

ANSWER A CALL

......................................................................................................

4.3

END A CALL

...............................................................................................................11

4.4

ADJUST EARPIECE VOLUME

..................................................................................

4.5

MUTE A CALL

.............................................................................................................

4.6 .................................................................................

4.7

TURN ON THE KEYPAD LOCK

.................................................................................

4.8

REDIAL THE LAST NUMBER

....................................................................................

4.8.1

REDIAL A NUMBER FROM THE REDIAL LIST

.......................................................

4.8.2 ..........................................

4.8.3

DELETE A REDIAL NUMBER

..................................................................................

4.8.4 DELETE ALL REDIAL LIST ENTRIES

..................................................................

4.9

FIND THE HANDSET

..................................................................................................

4.10

MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY )

.................

4.10.1 .........................................................................

4.10.2

CALL ALL HANDSETS

............................................................................................

4.10.3 TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET...............................

4.10.4

MAKE A 3-WAY CONFERENCE CALL

..................................................................

10.........

TURN OFF HANDSET RINGER

4.1.1

PREPARATORY DIALLING

......................................................................................

4.1.2

DIRECT DIALLING

....................................................................................................

CONNECTING THE BASE STATION

INSTALLING AND CHARGING THE BATTERIES

STORE A REDIAL NUMBER INTO THE PHONEBOOK

INTERCOM ANOTHER HANDSET 12

5 PRIVATE PHONEBOOK...................................................................................

5.3 VIEW A PHONEBOOK ENTRY ...................................................................................

5.4 EDIT A PHONEBOOK ENTRY ....................................................................................

5.5 DELETE A PHONEBOOK ENTRY ..............................................................................

5.6 DELETEALLPHONEBOOKENTRIES

5.7 CHECK THE PHONEBOOK USAGE ..........................................................................

6 CALLER DISPLAY (NETWORK DEPENDENT) ..............................................

6.1 VIEW THE CALL LIST.................................................................................................

6.2 STORE A CALL LIST NUMBER INTO THE PHONEBOOK ......................................

6.3 DELETE AN ENTRY IN THE CALL LIST ....................................................................

6.4 DELETE ALL CALL LIST ENTRIES

7 PHONE SETTINGS ...........................................................................................

7.1 DATE AND TIME SETTINGS ....................................................................................... 18

7.1.1 CHANGE THE DATE FORMAT .................................................................................

7.1.2 CHANGE THE TIME FORMAT ..................................................................................

7.1.3 SET THE TIME ...........................................................................................................18

7.1.4 SET THE DATE..........................................................................................................18

7.2 ALARM SETTINGS .....................................................................................................

7.2.1 TURN ON/OFF THE ALARM .....................................................................................1 9

7.2.2 SET THE ALARM TIME ............................................................................................. 1 9

7.3 HANDSET SETTINGS .................................................................................................

7.3.1 SET THE RINGER MELODY FOR INTERNAL CALLS

7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS ............................................

7.3.3 SET THE RINGER VOLUME .....................................................................................

7.3.4 SET ALERT TONES...................................................................................................

7.3.5 SET THE HANDSET LANGUAGE .............................................................................

7.3.6 RENAME THE HANDSET..........................................................................................

7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ...................................

7.3.8 SET THE AUTO ANSWER ........................................................................................

7.4 BASE SETTINGS ......................................................................................................... 21

5.1 ADD A NEW PHONEBOOK ENTRY ...........................................................................

5.2

TROUBLESHOOTING ......................................................................................

DECLARATION OF CONFORMITY..................................................................

7.4.1 DE-REGISTER A HANDSET.....................................................................................

7.4.2 CHANGE THE DIAL MODE.......................................................................................

7.4.3 CHANGE THE FLASH (RECALL)TIME .....................................................................

7.4.4 CHANGE THE SYSTEM PIN CODE .........................................................................

7.5 ..........................................................................................................23

7.6 RESET YOUR PHONE ................................................................................................

...........................................................................

SEARCH FOR A PHONEBOOK ENTRY ...................................................................

10 GUARANTEE AND SERVICE

......................................................................... 26

.........................................................................

.............................................

REGISTRATION

P REDIAL> to access the redial list.

4 DOWN

In lists: move down the options

During calls / ringing: decrease the

volume

During a call: Press to turn on / oﬀ the

speakerphone.

Call List / Phonebook entry : Press to

make a call with speakerphone

During ringing: Press to answer a call

with speakerphone

During answering machine message

playback / call screening:

Press to play message via speaker

5 SPEAKERPHONE ( )

CORUN- NI-MHAAAJ400, Type NiMH (Rechargeable battery)

Voltage Rating 400mAh ,2 X 1.2V AAA Size

6.3 Delete an entry in the Call List

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm.

6.4 Delete

1. Follow Steps 1 and 2 in Section 6.1

. 2. Press <MENU> and <UP/DOWN> to select DELETE ALL.

3. Press <OK> to display .CONFIRM?

4. Press <OK> to confirm. All entries will be deleted and the display will show

EMPTY.

7 PHONE SETTINGS

Your phone comes with a selection of settings that you can change to

personalise your phone the way you like it to work.

7.1 Date and Time Settings

If you subscribe to Caller Display the time and date settings will be automatically

updated by the

The Caller Display service only sends the month and date, not the year, so you

may need to set the year.

7.1.1 Change the Date Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select DATE FORMAT.

4. Press <OK> and <UP/DOWN> to select your desired date format

(DD-MM-YYor MM-DD-YY).

5. Press <OK> to confirm.

7.1.2 Change the Time Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select TIME FORMAT

4. Press <OK> and <UP/DOWN> to select your desired time format

5. Press <OK> to confirm.

7.1.3 Set the Time

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET TIME.

4. Press <OK> and then enter the time information in 24 hour format.

5. Press <OK> to confirm.

Note: If time has been set before, the current time will display, otherwise,

“HH:MM” will display.

7.1.4 Set the Date

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET DATE.

4. Press <OK> and then enter the date information. The date entered will be in

5. Press <OK> to confirm.

Note: If date has been set before, the current date will display, otherwise,

the format you set in Section 7.1.1.

“DD-MM-YY ” will display.

7.2 Alarm Settings

You can set an alarm time on When an althe handset. arm is set, the <ALARM

Icon> is shown on the handset display.

<ALARM icon> and “ALARM ON ” flash on the handset display, and the alarm

tone rings for 45 seconds. You can press any key to disable the alarm. If the

snooze function is activated, the alarm will sound again at the end of the snooze

period of seven minutes. You can also press and hold <TALK OFF> while the

Note:

a. A key press will still disable the alarm even if the handset keypad is locked

b. The alarm volume level is the same as the settings of the handset ringer

volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds

at VOLUME 1 level.

when the alarm rings.

(12 HR or 24 HR).

c. During an external call or internal call, if an alarm is set and when the alarm

time is reached, the <ALARM icon> and “ALARM ON” will still flash. An

alarm tone will be emitted from the earpiece to alert the user the alarm time

is reached. Once the user presses any key or presses and holds

d. During paging or ringing, the alarm will not sound when the alarm time is

reached. However, if the snooze function is enabled and there is no paging

7.2.1 Turn on/off the Alarm

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select ALARM.

4. Press <OK> to confirm.

Note: If ON is selected, you will be asked to set the alarm time.

7.2.2 Set the Alarm Time (If Alarm time is set to be ON)

1. Follow Steps 1 to 4 in Section 7.2.1.

2. Enter the alarm time in 24 hour format.

3. Press <OK> to display "SNOOZE".

4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <OK> to confirm.

7.3 Handset Settings

7.3.1 Set the Ringer Melody for Internal Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP

3. Press <OK> and <UP/DOWN> to select INT RING.

4. Press <OK> and <UP/DOWN> to select the melody you want to hear for

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

3. Press <OK> and <UP/DOWN> to select ON/OFF.

<TALK OFF> to disable the alarm, the display will revert to the call duration.

or ringing, the alarm will sound again at the end of the snoo .

internal calls.

7.3.2 Set the Ringer Melody for External Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select EXT RING.

4. Press <OK> and <UP/DOWN> to select the melody you want to hear for

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

7.3.3 Set the Ringer Volume

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select RING VOLUME.

4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of

6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection.

If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.

5. Press <OK> to confirm.

7.3.4 Set Alert Tones

Three different alert tones are set on by default, but can be turned off, if desired.

Key Tone - a single beep is emitted when you press a key.

you need to charge the handset batteries.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select TONE SETUP.

3. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /

4. Press <OK> and <UP/DOWN> to turn on or off these tones.

5. Press <OK> to confirm.

Out of Range Tone - emitted while you are talking on the phone to alert you to

move loser to the base unit, before the call is lost.

Low Battery Tone - emitted while you are talking on the phone to alert you that

OUT OF RANGE.

7.3.5 Set the Handset Language

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select LANGUAGE.

3. Press <OK> and <UP/DOWN> to select the desired language.

4. Press <OK> to confirm.

7.3.6 Rename the Handset

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS

2. Press <OK> and <UP/DOWN> to select RENAME HS.

3. Press <OK> and change the name of your handset, using <C/MUTE> to delete

4. Press <OK> to confirm.

letters and the alphanumeric keys to enter up to 10 letters for the name.

7.3.7 Choose the Information to be Displayed in Idle

You can choose to display the time or handset name in your idle screen.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select HS DISPLAY.

3. Press <OK> and <UP/DOWN> to select HANDSET NAME or TIME.

4. Press <OK> to confirm.

7.3.8 Set the Auto Answer

If you turn on the Auto Answer, you can answer a call automatically by just lifting

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select AUTO ANSWER.

3. Press <OK> and <UP/DOWN> to turn on or off the auto answer feature.

4. Press <OK> to confirm.

the handset off the base or charger, without having to press any key.

7.4 Base Settings

7.4.1 De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty

or lost and needs to be replaced.

You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to

Note: You cannot de-register the handset that you are currently using.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS .

2. Press <OK> and <UP/DOWN> to select DELETE HS.

3. Press <OK> and the display shows "PIN?----".

the antenna icon flashing and "REGISTER" on the display.

de-register a handset from the base station.A de-registered handset will have

4. Enter the 4-digit system PIN.

5. Press <OK> and the first handset number is displayed.

6. Press <UP/DOWN> to scroll through the list of registered handsets and

7. Press <OK> to confirm, and the chosen handset will be de-registered.

select the number of the handset you want to de-register.

network when you receive an incoming call.

7.4.2 Change the dial mode

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS

2. Press <OK> and <UP/DOWN> to select DIAL MODE.

3. Press <OK> and <UP/DOWN> to select TONE PULSE or

(The current setting is indicated by an asterisk to the right).

4. Press <OK> to confirm.

You should normally leave the dialling mode at its default setting of TONE (also

called DTMF) unless the phone is connected to an old exchange that only

Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling

recognises PULSE dialling.

for the rest of that call.

7.4.3 Change the Flash (Recall) Time

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select FLASH TIME.

3. Press <OK> and <UP/DOWN> to select your desired flash time (SHORT,

4. Press <OK> to confirm.

You may need to change the recall (flash) time if your phone is connected to a

PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM

( 0ms) or LONG (600ms).

MEDIUM,

7.4.4 Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base

station. It is used to protect your phone against use. The defaultunauthorised

system PIN code is 0000.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select CHANGE PIN.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

4. Enter the old system PIN.

5. Press <OK> and enter the new system PIN.

6. Press <OK> and enter the new system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN

entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <OK> to confirm

7.5 Registration

already registered to your base, so you do not need to register them.

You can register additional handsets to have up to five handsets per base unit,

with each handset's number (1 to 5) shown on its display. (Note: each handset

1. Press and hold <PAGE> on the base station for more than five seconds, to

put the base station into registration mode. (Note: there is no feedback to

To register a new handset to your base:

2. Press <MENU> and <UP/DOWN> to select REGISTRATION.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

4. Enter the 4-digit system PIN.

5. Press <OK> to confirm, and the display will show SEARCHING.

If the handset registration is successful, you will hear a confirmation tone and the

<antenna icon> will stop ﬂashing. This may take a short while

The handset will automatically be allocated the next available handset number.

This handset number is shown in the handset display in standby mode. If the

handset registration is unsuccessful, the <antenna icon> will still flash and the

7.6 Reset Your Phone

You can reset your phone to the default settings . After a reset, all

your personal

settings, call list list entries, willentries and redial

1. Press <MENU> and <UP/DOWN> to select

DEFAULT.

2. Press <OK> and you are requested to enter the 4-digit system PIN.

3. Enter the 4-digit system PIN.

4. Press <OK> to display CONFIRM?

5. Press <OK> to confirm, and the phone will be reset to its default settings.

23 24

can only be registered to one base.)

minute, so the following handset sequence must be completed within this

unchanged.

DECLARATION OF CONFORMITY

UK (B TP) V e r 1 , 2 0

Problem Causes Solutions

No dialling tone when

pressing <TALK ON>

a.The connection cord of

the base station is not

plugged in.

b.The adapter cord is not

plugged in correctly in

the base station.

c. Another handset is using

the base to make a call.

d. Wrong telephone line cord

a.Check the connections. Unplug

and plug back in the mains.

Check that the telephone cord

has been plugged into the base

station and the phone socket.

b.Check the base station plug and

the 230V plug (remove and plug-in).

c.Wait until the line is unoccupied.

d.Use the original telephone line

cord supplied

When connect to a PBX,

no and/or wrong connection

after dialling.

Dialling prefix is needed. Insert the dialling prefix

"SEARCHING" is displayed. a. Base station out of

range.

b. Base station not

connected to mains.

Reduce the range.

Connect base station to

mains.

The call does not work. Service not activated or

wrong setting

Check your Subscription with

network or change the dial mode.

No display. Empty battery Recharge battery

key

8 TROUBLESHOOTING

Technical Support

If the fault persists...

Disconnect all other instruments connected to the same line as the

Disconnect the base unit from the telephone line and plug a different phone into

the master telephone socket.

Try making a call. If this works, the line is OK.

If the cal l does not work, and you are using a remove two-way socket adapter,

it and plug a telephone directly into the socket. If the cal l now works, the adapter

may be faulty.

This telephone is not equipped with a grounding function

used in PBX systems.

a nd try to ma ke a call.

all Call list entries

alarm is sounding, to stop the alarm and turn off the snooze function.

ze period

LONG, with the current setting indicated by and asterisk to the

right).

IMPORTANT: When you purchase a

Handset registration is only necessary when you buy extra handsets or if a

handset has become faulty.

remains

, and therefore some of

the functions may be limited when

We the manufacturer / Importer : Binatone Telecom Plc,1 Apsley Way London, NW2 7HF

Declare under our sole responsibility that the following product

Type of equipment: Digital cordless telephone

Model Name:

Country of Origin: China

Brand:

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on

the approximation of the laws of the Member States relating to Radio Spectrum Matters,

the Council Directive 2004/108/EC on the approximation of the laws of the Member

Statesrelating to electromagnetic compatibility (EMC) and the European Community

Directive 2006/95/EC relating to Electrical Safety.

Assessment of compliance of the product with the requirements relating to the

essential requirements according to Article 3 R&TTE was based on Annex III of the

Directive 1999/5/EC and the following standard:

Manufacturer / Importer

(signature of authorized person)

Date Signature

Binatone

The conformity to the requirements is validated by the symbol.

NOTE: In compliance with Directive 2002/96/EC, when you purchase a product

that comes with the symbol shown on the right, you are required to dispose of

electrical and electronic equipment by separate waste collection and you

cannot dispose of the product as normal waste.

This equipment and all its components, subsystems and consumable materials

formed an integral part of this product and when you decide to dispose

take them to local recycling centre for a

appropriate waste disposal, in compliance with the current regulations.

Details about the location of these centres can be obtained from

your local authority.

of them you have to

Notes for battery disposal

Your product contains batteries covered by the European Directive 2006/66/EC,

which cannot be disposed of with normal household waste.

Please the local rules on separate collection of batteries. The

correct disposal of batteries helps protectthe environment and prevent health

31 May 2010

be aware of

hazards.

system, all handsets are

Radio Spectrum:

EMC:

Electrical Safety: EN 60950-1: 2006+A11: 2009.

When the alarm time is reached, the

display will return to "REGISTER", so you will need to repeat the registration

process.

know it is in registration mode.) It will stay in registration mode for about 1

time.

be deleted but your phonebook

The

purchase shown on your sales receipt. This guaranteed o e s n o t c o v e r a n y

faults or defects caused by accidents,misuse, fair wear and tear, neglect,

faults on the telephone line, lightning, tampering with the equipment, or any

attempt at adjustment or repair other than through approved agents.

Please keep your sales (till) receipt this is your guarantee.

You should also keep the original packaging material.

In the unlikely event that you need to return your

While the unit is under Guarantee

1. Disconnect the base unit from the telephone line and the mains electricity

supply.

2. Pack up all parts of your

3. Return the unit to the shop where you bought it, making sure you take your

sales receipt.

After the Guarantee has expired

Remember to include the mains adapter.

3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the

repair charge and details of where to send your

for repair.

4. Make sure you include with your

5. Return your

If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair

under Guarantee. Then...

¾Your name and address

¾A cheque or postal order for the value of the repair

* This do e s not affect your statutory rights.

Department.

packaging.

GUARANTEE AND SERVICE

to our Repair Centre while it is under guarantee, there may be handling charge.

¾A brief description of the fault

phone system is guaranteed for 12 months from the date of

phone system , using the original

phone system to the address given by the Service

phone system.

phone system

Solas 1505 Series

Solas series

Solas 150

external calls.

ETSI EN 301406: V2.1.1 (2009-07);

ETSI EN 301489-6: V1.3.1 (2008-08);

ETSI EN 301489-1: V1.8.1 (2008-04);

Product specificaties

Merk:	Binatone
Categorie:	Telefoon
Model:	Solas 1500
Kleur van het product:	Black, White
Ingebouwd display:	Ja
Soort:	DECT-telefoon
Capaciteit van de accu/batterij:	400 mAh
Beeldscherm:	LCD
Touchscreen:	Nee
Frequentieband:	1.88 - 1.9 GHz
Montagewijze:	Bureau
Luidspreker:	Ja
Nummerherkenning:	Ja
Gesprekstijd timer:	Ja
Ondersteund aantal accu's/batterijen:	2
Aansluiting voor netstroomadapter:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Standby tijd:	100 uur
Mac-compatibiliteit:	Nee
Polyfone beltonen:	Nee
Aantal melodieën:	5
Gesprekstijd:	7 uur
Capaciteit telefoonboek:	20 entries
Opnieuw bellen:	Ja
Navigatietoets:	Ja
Draadloze verbindingen:	Nee
Maximum indoorbereik:	50 m
Maximum outdoorbereik:	300 m
Antwoordapparaat:	Nee
Aantal handsets mogelijk:	3
Aantal items in belgeschiedenis:	5
Plaats toetsen:	Basis
Bedrijfstemperatuur (T-T):	0 - 40 °C
Batterijtechnologie:	Nikkel-Metaalhydride (NiMH)
Type batterij:	AAA