Benro S8Pro Handleiding

Benro Statief S8Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Benro S8Pro (5 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Thank you for making Benro your choice for professional photographic

equipment. your Benro gear is manufactured to provide years of dependable

service. In order to obtain optimum satisfaction and performance, we suggest

that you carefully read these instructions.

A35W Monopod

S8 Series Video Head

使用方法

S8系列摄像云台

感谢您选用百诺专业摄影器材，百诺产品提供值得您信赖的售后服务。为了让您对百

诺产品的使用更加满意，我们建议您仔细阅读下面的使用说明。

2 3

www benro com. .

可滑动快装板安全钮

QR Plate Release Button

水平锁定钮

Pan Lock Handle

无级阻尼调节

俯仰锁定钮

Tilt Lock Handle

动平衡调节

快装板锁定钮

QR Plate

Locking Handle

可亮水平仪按钮

Posi-Step Counterbalance

Adjustment

Bubble Level Light

(Press once to turn on with auto turn-off)

Tilt Drag Adjustment

半球碗(仅限S8b)

水平无级阻尼调节

3/8"附件螺孔

Half Ball Base(S8b only)

把手

Pan Bar Handle

球碗锁紧旋钮(仅限S8b)

Head Lock Handle(S8b only)

Camera Screw

Quick Release Plate

相机螺丝

快装板

Pan Drag Adjustment

3/8"Accessory

Mount(both sides)

4 5

www benro com. .

QR Plate: (See figure 1)

An included quick release plate makes camera changes and transport easy. Each

QR plate comes with both a 1/4” & 3/8” screw for your convenience. The unused

screw is stored on the underside of the head.

QR Plate Mounting and Safety Release: (See figure 2)

Loosen Quick Release Plate Lock Lever and press the QR Safety Button to allow

QR Plate to be removed. Attach Plate to bottom of Camera using the Mounting

Screw then slide back on to Head. Slide and position for best balance and tighten

QR Plate Lock Lever.

Tilt Adjustment: (See figure 3)

A side mounted knob adjusts the tension of the drag on front-rear tilt movements.

Rotate to adjust with camera mounted to find the most appropriate setting.

Counterbalance Adjustment: (See figure 4)

With camera mounted on QR plate, position for best balance, tighten tilt lock and

then set counterbalance knob to 0. With camera in place hold pan bar, loosen tilt

lock and set counterbalance to 1. Tilt head forward and backward to engage internal

spring and check to see if head with camera stays in upright position. If required

repeat and increase counterbalance setting to adjust for total weight of camera

system.

Pan Adjustment: (See figure 5)

A base mounted control adjusts the tension of the drag on the pan movements.

Rotate to adjust with camera mounted to find the most appropriate setting.

NOTE: Pan bar handle can be mounted on either side of head.

Bubble Level Lighting (use coin to access battery compartment and replace

CR2032 Battery)

To illuminate Bubble Level "Press light switch once to turn the Bubble Level Light on.

It will turn off by itself." To change battery, remove access panel and battery holder,

replace battery (+ side up) and reverse procedure.

NOTE: The S8 Head is available in two versions, one with a flat base which screws

directly on platforms with a 3/8” mounting thread and an S8B version with an integral

75mm Half Ball Base.

If you are mounting a Video Head with a Ball base unscrew the Head Lock Handle

completely clockwise until it is free of the threaded shaft, insert your new Video

Head into a tripod or other support with a corresponding 75mm Bowl and reverse

the procedure securing with the Head Lock Handle, turning counter-clockwise.

S8 SERIES VIDEO HEAD INSTRUCTIONS

LIMITED WARRANT Y COVE RA GE

Your Benro product has been carefully manufactured, has passed many quality

assurance checks and has been thoroughly tested before shipment. It is warranted

in the country from which you purchased it based on the date of purchase to the

original owner, against defects in materials and workmanship. Please contact your

local Benro dealer for further information and details about your Warranty. The

Warranty does not apply to damages caused by mishandling, dropping, or leaking

batteries, nor modification or servicing performed by others.

USER NOTICE

Do not exceed the maximum specified load capacity

(see specifications on the package label or visit www.benro.com).

Always ensure that Leg and Head Locks are tightly engaged before

mounting any gear on your Video Head.

Do not use any Video head below temperatures of −4°F or above +140°F

(−20°C / +60°C).

Always clean and dry any Video head after it has been exposed to wet,

dusty, sandy or salty conditions. Your Video head is not recommended for

use in salt water. If required, clean Video head using a mild soap solution

applied with a soft cloth, rinse with fresh water and dry with soft towel.

Remove any dust, dirt or sand from all Locks and all moving parts.

Do not leave any Video head in the sun for prolonged periods and avoid

high temperature exposure.

Avoid leaving any Video head unattended in areas where people could

trip over the gear and get hurt.

Remove camera, lens, and all gear from any Tripod when transporting.

For your safety, don't let your Benro gear come in contact with any

electrical power source.

Specifications and design are subject to change without notice.

Product specificaties

Merk:	Benro
Categorie:	Statief
Model:	S8Pro
Kleur van het product:	Zwart
Gewicht:	2470 g
Met slot:	Ja
Maximale gewichtscapaciteit:	8 kg
Ingebouwd spirit niveau:	Ja
Bijlage:	3/8 "
Voorkant kantelhoek:	-80 - 90 °
Bodemdiameter:	75 mm
Tripod head type:	Vloeistof
Panoramische omwenteling:	360 °
Kantelbeveiliging:	Ja
Contragewicht:	Ja
Snelle disconnect:	Ja
Vlakke basis:	Ja
Pan-staaf inbegrepen:	Ja
Panvergrendeling:	Ja