BenQ ScreenBar Lite AR18_C Handleiding

BenQ Lamp ScreenBar Lite AR18_C

Lees hieronder de 📖 handleiding in het Nederlandse voor BenQ ScreenBar Lite AR18_C (37 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/37
ScreenBar Lite (AR18_C)
BenQ.com
© 2019 BenQ Corporation.
All rights reserved. Rights of modification reserved.
P/N: 96-05-00009-G
4J.W4201.001
1English
Package Contents
Check the packaging for the status of the product. If damaged, please contact the place of
purchase immediately.
The illustrations in this guide are for your reference only and may look different from the
appearance of the actual product.
For Your Safety
• Connect the USB power cable to USB port power (5V DC, 1A) only. Otherwise the lamp will
fail to work normally or result in a fire hazard.
• In order to prevent any damages to the lamp, do not hang or place any objects on the lamp.
• Route the USB power cable so as to avoid it from being pinched by items placed upon it or
against it.
• If the lamp will not be used for a long period of time, unplug it from the USB port.
Installation
1. Clamp the ScreenBar Light lamp
onto the center of the top side of
your computer’s screen bezel (as
indicated by in the figure on the
right). The range of clampable screen
bezel thickness is 3mm - 8mm.
2. Connect the USB power cable to the
USB port of your computer (as
indicated by in the figure on the
right).
• Do not use a USB extension cable.
Otherwise the lamp will not function
properly.
• It is recommended that the lamp’s
power be supplied by the USB port of
your computer. If a portable power
bank or AC power adapter is to be
used as the power source for the
lamp, the power output shall meet the
requirement (output voltage: 5V,
output current: 1A or above) in order
for the lamp to function normally.
• If the Color Temperature Adjustment
and Brightness Adjustment
buttons keep flashing, check if a USB
extension cable is used. Do not use a
USB extension cable.
• In case of the following situations, unplug the lamp from the USB port
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
- When the outer casing of the lamp is broken
- When there are strange odors coming from the lamp
- When the LED light source flickers
- When the insulation of the lamp’s wiring is damaged or frayed, and the metal
strings inside can be seen
• Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
• This lamp is designed for indoor use only. Do not use it outdoors.
• Never disassemble the lamp or remove any components from it, as doing so
may result in accidents and will void the product warranty.
CAUTION
3mm ~ 8mm
1
2

Product specificaties

Merk: BenQ
Categorie: Lamp
Model: ScreenBar Lite AR18_C

Heb je hulp nodig?

Als je hulp nodig hebt met BenQ ScreenBar Lite AR18_C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lamp BenQ

BenQ

BenQ ScreenBar Plus Monitor Light AR17_C Handleiding

9 December 2024
BenQ

BenQ ScreenBar e-Reading AR17 Handleiding

9 December 2024
BenQ

BenQ e-Reading Floor Lamp Handleiding

16 Maart 2023
BenQ

BenQ ScreenBar Halo CR20_C Handleiding

19 Februari 2023
BenQ

BenQ ScreenBar Lite AR18_C Handleiding

5 December 2022

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Chauvet

Chauvet WELL POD 2X6 Handleiding

17 December 2024
Makita

Makita MT001 Handleiding

16 December 2024
Ledlenser

Ledlenser ML6 Handleiding

16 December 2024
Ledlenser

Ledlenser ML4 Handleiding

16 December 2024
Ledlenser

Ledlenser H5R Work Handleiding

16 December 2024
Ledlenser

Ledlenser H3.2 Handleiding

16 December 2024
Ledlenser

Ledlenser MH5 Handleiding

16 December 2024
Ledlenser

Ledlenser MH4 Handleiding

16 December 2024
Ledlenser

Ledlenser H7R Work Handleiding

16 December 2024
Ledlenser

Ledlenser H7R Core Handleiding

16 December 2024