Bell'O 8240DB Handleiding

Bell'O Flat panel steun 8240DB

Lees hieronder de 📖 handleiding in het Nederlandse voor Bell'O 8240DB (21 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

Introduction

Congratulations on your decision to mount your TV with a TV Wall Mounting Kit For Dummies. The

enclosed mounting bracket was engineered and designed by Bell’O International Corporation using the

latest computer-aided design and stress-analysis software to ensure safety and durability when installed

according to the instructions. It has been further tested and Listed by Underwriters Laboratories.

About This Manual

Mounting your TV on the wall can seem like an overwhelming task. This handy For Dummies

®guide takes you

through the process step-by-step to ensure the proper installation of your mount. Before starting this project, be

sure to read the entire instruction manual and watch the included installation DVD for a complete

demonstration. If at any time you are unclear about the directions and believe you need further assistance,

contact the Bell’O®installation experts at 888-779-7781 from 9am – 5pm EST.

Icons Used in This Book

Don’t be alarmed by the bomb in the icon. We just want to

get your attention because making an error could be costly.

This is not really very technical stuff, just some details you

need to really pay attention to.

Foolish Assumptions

Although our easy-to-install mounts and instructions simplify the process, mounting your TV still requires

great care. We assume you’re someone who, at minimum, has done odd jobs around the house and has

some basic tools. You don’t need to be a master carpenter or electrician to install this mount. With that

said, if at any time you feel that you are uncertain or uncomfortable with doing the installation yourself,

don’t hesitate to call on a handyman or professional contractor/installer.

1English

Precautions!

• This mounting bracket was designed to be installed and utilized ONLY as specified

in this manual. Bell’O International Corporation will not be responsible for failure

to assemble as directed or for the improper assembly, use, or handling of this

product.

• Improper installation of this product may cause damage or serious injury.

Bell'O International Corporation cannot be liable for direct or indirect damage or

injury caused by incorrect mounting, incorrect use, or incorrect assembly.

• If the mounting bracket will be attached to any structure other than those

specified in this manual, only a licensed professional contractor/installer should

perform this installation. The supporting structure must support, at minimum, four

times the combined weight of the mounting bracket and TV. It is the responsibility

and liability of the installer to ensure the suitability of the supporting structure.

• This product should NEVER be mounted to metal framing studs.

• Check carefully to ensure that there are no missing or damaged parts.

Never use defective parts. If any parts are damaged or missing, call Bell'O

International Corporation at 888-779-7781 and parts will be shipped directly to

purchaser. Please contact Bell’O International Corp. before attempting to return

products to the point of purchase.

• Specifications are subject to change without notice.

• The maximum weight of your television cannot exceed the maximum weight rating of

your mount or any attached Bell'O®UL listed adapters sold separately, whichever is

lower.

English

NEVER exceed the maximum load capacity of 80 lbs (36 kg)

Product specificaties

Merk:	Bell'O
Categorie:	Flat panel steun
Model:	8240DB
Kleur van het product:	Zwart
Breedte:	147 mm
Diepte:	95 mm
Hoogte:	182 mm
Gewicht verpakking:	2820 g
Montagewijze:	Muur
Afmetingen verpakking (BxDxH):	241.3 x 114.3 x 152.4 mm
Maximale gewichtscapaciteit:	36 kg
Paneelmontage-interface:	75 x 75,100 x 100,200 x 200 mm
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	200 x 200 mm
Bereik kantelhoek:	-5 - 15 °