BDI Sigma 6902 Handleiding

BDI Bureau Sigma 6902

Lees hieronder de 📖 handleiding in het Nederlandse voor BDI Sigma 6902 (5 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sigma & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey. 02.18.2019
T1 4mm Hex Wrench x1
Hardware:
C2 Frame x 1
C3 Leg x 1
C1 Glass Panel x 1
H1 M6 x 15mm Screw
x 11
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a
BINK table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Sigma Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and other surfaces with a moist cloth.
Your Sigma Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
bdiusa.com
customerservice@bdiusa.com
SIGMATM 6902
RETURN
bdiusa.com
customerservice@bdiusa.com
SIGMA 6902
RETURN
2
Step 2 - Position the frame C2 upside down (end plate facing up). Position the top of the leg C3 over the
matching 4 threaded inserts on the cross bar. Attach the leg to the cross bar using screws H1 and hex
wrench T1.
H1
H1 x 4
T1
End plate up
cross bar
C2
C3
bdiusa.com
customerservice@bdiusa.com
SIGMA 6902
RETURN
3
Step 3 - Determine of you want the return on the left or right side of the desk. Find the 3 threaded insert below
the front edge (left or right). Thread a screw H1 middle insert in half way into the . With help from another
person, position the return so that the notch in the end plate goes around the middle screw. Tighten the middle
screw with the hex wrench.
1 screw H1 half way
into middle insert
(left hand side)
1 screw H1 half way
into middle insert
(right hand side)
Choose
left hand or
right hand
notch in end
plate
2 Person skTa
H1
C2
or


Product specificaties

Merk: BDI
Categorie: Bureau
Model: Sigma 6902

Heb je hulp nodig?

Als je hulp nodig hebt met BDI Sigma 6902 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bureau BDI

Handleiding Bureau

Nieuwste handleidingen voor Bureau