BDI Sequel 6051 Handleiding

BDI Bureau Sequel 6051

Lees hieronder de 📖 handleiding in het Nederlandse voor BDI Sequel 6051 (15 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017 BDI
Made in Taiwan. 02.24.2017 v6
T2 4mm Hex Wrench
C7 Wire Tray x 1
C4 Keypad x 1
C5 Power Cord x 1
C3 Control Module x 1
C8 Glass Panel x 1
A1 Main Panel x 1
C1 Leg x 2
C6 Cord Conduit x 1
C2 Foot x 2
bdiusa.com
customerservice@bdiusa.com
SEQUEL® 6051/6052
LIFT DESK
H5 1/4-20 x 12mm Screw x 7
Tool Required:
Phillips Screwdriver
H2 #6 Wood Screw x 6
H3 M6 x 12mm Screw x 12
H8 Glass Bumper x 2
C9 Grommet Cover x 1
H9 Dual Lock Dot x 8
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Placement and Maintenance
Sequel® Lift Desk is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth.
Your Sequel Office furniture is engineered for easy assembly. Carefully ®
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@bdiusa.
com. For all other concerns, please contact your BDI retailer.
H7 Leveler x 4
H6 Cord Clip x 6
H1 #10 Wood Screw x 4
T1 5mm Hex Wrench
H4 M6 x 16mm Screw x 8
OWNER’S MANUAL
bdiusa.com
customerservice@bdiusa.com
SEQUEL 6051/52
LIFT DESK
2
Step 2 - Install Control Module and Keypad
Lay top panel upside down on a soft surface (like carpet). Attach Keypad on the desired side (left or right) C4
with 2 Wood Screws . Orient the Control Module so that the Keypad port is facing the Keypad side and H1 C3
secure between the 2 steel rails with 2 Wood Screws as shown. Route the Keypad cord into the groove in H1
the panel and through the hole in the metal frame.
User’s left
hand side
User’s right
hand side
C3 C4
H1 x 4
bdiusa.com
customerservice@bdiusa.com
SEQUEL 6051/52
LIFT DESK
3
Step 3 - Secure the keypad cord into the groove using 6 cord clips and 6 wood screws . Connect H6 H2
keypad cord into the Control Module Port (labeled HS) and bundle the slack with the Hook & Loop Tie.
H2 x 6
H6 x 6
Groove for Keypad Cord
Hook & Loop Tie


Product specificaties

Merk: BDI
Categorie: Bureau
Model: Sequel 6051

Heb je hulp nodig?

Als je hulp nodig hebt met BDI Sequel 6051 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bureau BDI

Handleiding Bureau

Nieuwste handleidingen voor Bureau