Baumr-AG BPR1000 Handleiding

Baumr-AG Niet gecategoriseerd BPR1000

Lees hieronder de 📖 handleiding in het Nederlandse voor Baumr-AG BPR1000 (109 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/109

User Manual

[Revision 1. ]0 July 2022

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

The product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be present. It is essential to add

adequate engine oil of the correct type to the engine before use. Failure to add engine oil will void the product warranty.

BPR1000 Tracked Front End Loader Mini Dumper

E&OE © -AG 3 2022 Baumr

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Wherever possible, use a residual current

device (RCD).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot allow the equipment to –

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before , changing adjusting

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• service- Perform related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Understand Your Machine

• Read this manual and labels affixed to the machine to understand its limitations and potential hazards.

• quickly. Be thoroughly familiar with the controls and their proper operation. Know how to stop the machine and disengage the controls

• Make sure to read and understand all the instructions and safety precautions as outlined in the Engine Manufacturer’s manual. Do not attempt to

operate the machine until you fully understand how to properly operate and maintain the engine and know how to avoid accidental injuries and/or

property damage.

• If the unit is to be used by someone other than original purchaser, or is to be loaned, rented, or sold, always provide this manual and any needed

safety training before operation. The user can prevent and is responsible for accidents or injuries that may occur to themsel to other people, ves,

or to property. Do not force the machine beyond its limits. Use the correct machine for your application.

Personal Safety

• Do not permit children to operate this machine at any time.

• Keep children, pets, and other people not using the unit away from the work area. Be alert and shut off the unit if anyone enters work area. Keep

children under the watchful care of a responsible adult.

• Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly.

• Dress properly: Wear long, heavy pants, work boots, and work gloves. Do not wear loose clothing, short pants, or jewellery of any kind. Secure

long hair so it is above shoulder level. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be

caught in moving parts.

• Protect eyes, face, and head from objects that may be thrown from the unit. Always wear safety goggles or safety glasses with side shields when

operating.

• Wear appropriate hearing protection.

• Always keep hands and feet away from all moving parts during operation. Moving parts can cut or crush body parts.

• Always keep hands and feet away from all pinch points.

• Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service.

• Stay alert, watch what you are doing, and use common sense when operating the machine.

• Do not overreach. Do not operate the machine while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear

that will protect your feet and improve your footing on slippery surfaces. Keep proper footing and balance at all times. This enables better control

of the machine in unexpected situations.

Inspect Your Machine

• Chec ightened.k your machine before starting it. Keep guards in place and in working order. Make sure all nuts, bolts, etc., are securely t

• Never operate the machine when it needs repair or is in poor mechanical condition. Replace damaged, missing, or failed parts before using it.

Check for fuel leaks. Keep the machine in safe working condition.

• Do not use the machine if the engine’s switch does not turn off the engine when running. Any gasoline powered machine that can’t be controlled

with the engine switch is dangerous and must be replaced.

• Regularly check to see that the keys and adjusting wrenches are removed from the machine area before starting it. A wrench or a key that is left

attached to a rotating part of the machine may result in personal injury.

• Avoid accidental starting. Be sure the engine’s switch is off before transporting the machine or performing any maintenance or service on the unit.

Transporting or performing maintenance or service on a machine with its switch on invites accidents.

• If the machine should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning

sign of trouble.

Product specificaties

Merk:	Baumr-AG
Categorie:	Niet gecategoriseerd
Model:	BPR1000

Heb je hulp nodig?

Als je hulp nodig hebt met Baumr-AG BPR1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Baumr-AG

Baumr-AG BM-RD7 Handleiding

20 Mei 2023

Baumr-AG SMX220 Handleiding

7 Mei 2023

Baumr-AG BPR980 Handleiding

30 April 2023

Baumr-AG BPR1000 Handleiding

13 April 2023

Baumr-AG BPR920 Handleiding

12 April 2023

Baumr-AG BH620 Handleiding

5 April 2023

Baumr-AG GV7000 Handleiding

4 April 2023

Baumr-AG LT3 Handleiding

3 April 2023

Baumr-AG BT-889 Handleiding

28 Maart 2023

Baumr-AG BPR960 Handleiding

22 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Lucide Epice 08411/01/60 Handleiding

22 November 2024

Lucide Xirax 09119/10/31 Handleiding

22 November 2024

Lucide Galla 43408/40/31 Handleiding

22 November 2024

Lucide Zych 45356/01/97 Handleiding

22 November 2024

Lucide Garris 45450/50/97 Handleiding

22 November 2024

Lucide Camus 45452/40/97 Handleiding

22 November 2024

Lucide Raya led 45455/50/31 Handleiding

22 November 2024

Lucide Molio 45457/01/31 Handleiding

22 November 2024

Lucide Teun 45471/01/30 Handleiding

22 November 2024

Lucide Damian 45473/36/97 Handleiding

22 November 2024