Bauknecht OBIC Ecospace 8650 Handleiding

Bauknecht Vaatwasser OBIC Ecospace 8650

Lees hieronder de 📖 handleiding in het Nederlandse voor Bauknecht OBIC Ecospace 8650 (12 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

ENQuick Guide

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance, please

CONTROL PANEL

FIRST TIME USE

1. ON-OFF/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet indicator light

7. Display

8. Multizone indicator lights

9. Multizone button

10. Delay button

11. START/Pause button with indicator

light / Tablet (Tab)

PROGRAMS TABLE

Before using the appliance carefully read the Safety Instruction.

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

854 6 97 10 11

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water

softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the proce-

dure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse

aid dispenser should be lled when the A RINSE

AID REFILL indicator light in the control pan-

el is lit. NEVER pour the rinse aid directly into

the appliance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser only. Place the amount of detergent for D

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning e-

ciency. This system regenerates itself with salt, therefore it is required

to rell salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor

calibration. The sensor calibration can increase program duration up to 20 min.

Pro-

gram Programs description

Drying

phase

ActiveDry

Available

options *)

Duration

of wash

program

(h:min)**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

Eco 50°- Program is suitable to clean normally soiled tableware,

that for this use, it is the most ecient programme in terms of its

combined energy and water consumption, and that it is used to

assess compliance with the EU Ecodesign legislation. 3:20 9.5 0.64

2. Sensor 50°-60° - For normally soiled dishes with dried food re-

sidues. Senses the level of soiling on the dishes and adjusts the

program accordingly. 1:25 - 3:00 7.0 - 14.0 0.90 - 1.40

3. Intensive 65° - Program recommended for heavily soiled croc-

kery, especially suitable for pans and saucepans. 2:50 17.0 1.60

4. Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle,

that ensures optimal cleaning and drying performance in shor-

ter time. 1:25 11.5 1.10

5. Glass 45° - Program for delicate items, which are more sensitive

to high temperatures, for example glasses and cups. 1:40 12.0 1.20

6. Rapid 30’ - 50° Program to be used for half load of lightly-soiled

dishes with no dried food residues. Without drying. - 0:30 9.0 0.50

7. Silent - 50° Suitable for night-time operation of the appliance.

With the lowest noise. 3:30 16.0 1.15

8. Prewash - Use to refresh crockery planned to be washed later.

No detergent to be used with this program. - - 0:12 4.5 0.01

Quick GuideEN

DELAY - The start time of the program may be delayed for a period of

time between and hours.1 12

The DELAY function cannot be set once a wash cycle has been started.

TABLET (Tab)- If you use powder or liquid detergent, this option

should be o.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected

program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.

MULTIZONE - If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and detergent. By de-

fault the appliance washes dishes in all racks. OPERATION INDICATOR -

A LED light projected on the oor indicates

that the dishwasher is working.

One of the following operating modes can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few seconds, stays o during

the cycle and ashes at the end of the cycle.

c) The light stays on during the cycle and ashes at the end of the cycle

(default mode).

Please scan on your product in order to have more detailed information. the QR code

ActiveDry

is a convection drying system which automatically opens the door

during/after drying phase to ensure exceptional drying performance every

day. Door opens at the temperature that is safe to your kitchen furniture.

LOADING THE RACKS CAPACITY: 14 standard place-settings

LOWER RACK

For pots, lids, plates, sa-

lad bowls, cutlery etc.

Large plates and lids

should ideally be pla-

ced at the sides to avo-

id interferences with

the spray arm.

The lower rack has tip-

-up supports which

can be used in a verti-

cal position when ar-

ranging plates or in a

horizontal position (lo-

wer) to load pans and

salad bowls easily.

(loading example for the

lower rack)

CUTLERY RACK

(loading example for the cutlery rack)

The third rack was designed to

house the cutlery.

UPPER RACK

(loading example for the upper rack)

Load delicate and light dishes: glasses,

cups, saucers, low salad bowls.

FOLDABLE

FLAPS WITH

ADJUSTABLE

POSITION

CUTLERY BASKET

It is tted with top grids for improved cutlery arrange-

ment. It must only be positioned at the front of the

lower rack.

Knives and other utensils with sharp edges must be

placed in the cutlery basket with the points facing

downwards or they must be positioned horizontally

in the tip-up compartments on the upper rack.

More information in the Daily Reference Guide on website.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)

please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

To remove the upper spray arm,

turn the plastic locking ring in a

clockwise direction.

The lower spray arm may

be removed by pulling it

upwards.

ENQuick Guide

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The dishwasher does not

ll the water.

Display shows: H,

6 and On/O LED is blin-

king rapidly

No water in the water supply or the tap

is closed. Make sure there is water in the water supply or the tap running.

The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwa-

sher and reboot.

The sieve in the water inlet hose is clog-

ged; it is necessary to clean it

After having carried out the verication and cleaning, turn o and turn on the

dishwasher and restart a new program.

Dishwasher nishes the

cycle prematurely.

Display shows: 15

and On/

O LED is blinking

rapidly

Drain hose positioned too low or sipho-

ning into home sewage system.

Check if end of drain hose is placed at correct height (see INSTALLATION).Check

for siphoning into home sewage system, install air admittance valve if necessary.

Air in water supply. Check water supply for leaks or other issues letting air inside.

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues

please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period

of either up to 7 or up to 10 years, according to the specic Regulation requirements.

TROUBLESHOOTING

Please scan the on your product in order to have more detailed information. QR code

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.

• Visiting our website docs.bauknecht.eu and parts-selfservice.whirlpool.com

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product’s identication plate.

The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model

identier that can be used to consult the https://eprel.ec.europa.eu database portal.

IEC 436

Product specificaties

Merk:	Bauknecht
Categorie:	Vaatwasser
Model:	OBIC Ecospace 8650

Heb je hulp nodig?

Als je hulp nodig hebt met Bauknecht OBIC Ecospace 8650 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Vaatwasser Bauknecht

Bauknecht OBIC Ecospace 8650 Handleiding

18 December 2024

Bauknecht B2I HKD524 AS Handleiding

18 December 2024

Bauknecht GSIP 6527 IN Handleiding

3 December 2024

Bauknecht GSXP 50/1 Power Handleiding

3 December 2024

Bauknecht OBBC Ecosilent 8650 Handleiding

11 November 2024

Bauknecht B0I D551A S Handleiding

24 September 2024

Bauknecht B0U D651A X Handleiding

22 Augustus 2024

Bauknecht B0U D641A X Handleiding

22 Augustus 2024

Bauknecht B0F D641A X Handleiding

22 Augustus 2024

Bauknecht B0I D541A S Handleiding

21 Augustus 2024

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser

Teka DFI 46730 Handleiding

17 December 2024

Teka DFI 46720 Handleiding

17 December 2024

Junker JB55X02ITE Handleiding

16 December 2024

Junker JB55X01ITE Handleiding

16 December 2024

Junker JB55X01HTE Handleiding

16 December 2024

Junker JB65X00HTE Handleiding

16 December 2024

Junker JB65X00HVE Handleiding

16 December 2024

Junker JB55X00HTE Handleiding

16 December 2024

BEKO B5WFT89436W Handleiding

15 December 2024

BEKO BDEN38523MG Handleiding

15 December 2024