Bauhn ABGSS-1223 Handleiding

Bauhn Speaker ABGSS-1223

Lees hieronder de 📖 handleiding in het Nederlandse voor Bauhn ABGSS-1223 (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Product Overview
Have you got everything?
Operation
A. Bluetooth® Gimbal Sele Stick
B. Remote Control
C. USB-C Cable
D. User Guide
E. Warranty Certiîž‚cate
F. General Safety Warning
Front
Side
Connect To The Remote
• Slide the extendable pole out and push the remote
out from the remote holder.
• Press and hold the button on the remote until the
remote LED indicator starts ashing green.
• Turn on your smart phones Bluetooth® and select
‘ABGSS-1223’ from the list of found devices. Once
connected, the LED indicator will turn off. (The
remote will automatically turn off after 10 minutes if
not paired).
• Press and hold the button to turn the remote off.
The LED indicator will ash green then turn off.
Mounting Your Smart Phone
• Open the phone mount lever and extend the phone
mount until your smart phone can îž‚t in as illustrated.
• Slide your smart phone and the phone mount will
automatically tighten.
Gimbal Function
• Release the rotation ring lock.
• Once your smart phone is mounted onto the
product, press and hold the power button to turn
the gimbal function on. The gimbal LED indicator
light will ash green.
• Once gimbal function is turned on, it will
automatically enter stable mode; where your smart
phone will maintain a constant orientation even
when you move the product to a different angle.
• Slide the extendable pole out to the desired length
(up to 640mm).
• The gimbal stabiliser and the remote will
automatically connect with each other when
powered on.
• Press the button on the remote or the
power button on the gimbal to switch
between horizontal and vertical mode
• Press the button on the remote or the
power button twice on the gimbal to slowly
rotate your smart phone in a clockwise
direction.
• Press the button on the remote or the
power button three times on the gimbal to
slowly rotate your smart phone in a counter-
clockwise direction.
• Press any button on the remote or the power button
on the gimbal again to reset back to the original
position.
• Once nished, press and hold the power button on
the gimbal or the button on the remote to turn
the gimbal function off. Lock the rotation ring lock
securely before packing away.
A. Phone mount lever
B. Locking knob
C. Extendable pole
D. Remote holder
E. Handle/tripod legs
F. USB-C charging port
G. Gimbal LED indicator light
H. Power button
I. Rotation ring lock
J. Remote LED indicator light
K. button
L. button (clockwise rotation)
M. button (anti-clockwise
rotation)
N. button (horizontal/vertical
rotation)
O. Micro USB charging port
User Guide
Model: ABGSS-1223
Bluetooth® Gimbal Sele Stick
B
A
C
D
E
F
G
H
I
Remote
J
K
L
M
N
O
Horizontal
Vertical
Stable
mode
EF
D
B
A
C
Enjoy using your product!
Well done, you made it.
Now sit back and relax... your product is
automatically covered by a 1-year warranty.
How nice!
Give us a call
What? You mean this User Guide didn’t have ALL the answers? Speak to us!
We’d love to help you get up and running as quickly as possible.
Call our on . After Sales Support 1300 002 534
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Remote is not
working
• Check that the smart phone is paired with the remote.
• For Android devices, go to your camera settings and
set your volume key as the capture function.
• The remote control will automatically power off after 10
minutes of inactivity. Press and hold the button to
turn the remote on again.
• The gimbal stabiliser and remote will automatically
connect with each other when powered on. Ensure
both the gimbal stabiliser and the remote are within
close proximity of each other.
Gimbal
function not
working
• Ensure the rotation ring lock is released.
• Your smart phone may be too heavy for rotating
function.
• When motor is jammed, the gimbal will generate noise
and auto switch off to protect the motor.
Gimbal
stabilsier
calibration
• When your smart phone is not perfectly horizontal or
vertical with the gimbal selîž‚e stick, the gimbal requires
calibration.
Troubleshooting
Speciîž‚cations
Battery Li-ion 3.7V, 400mAh (gimbal)
Li-ion 3.7V, 70mAh (remote)
Charging input 5VDC, 0.5A
Bluetooth V4.0
Tripod height 60cm
Connection distance <10m
Dimensions 185 x 68 x 43mm (when folded)
Weight 208g
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license.
Other trademarks and trade names are those of their respective owners.
Charging (Gimbal)
• Connect the supplied USB-C cable to the USB-C charging port on the product
and the other end to a power supply. The gimbal LED indicator light will light up
red during charging. Once fully charged, the indicator light will turn off. When the
battery is low, the gimbal LED indicator light will ash red. Please charge before use.
Charging (Remote)
• Connect a Micro USB cable (not included) to the Micro USB charging port on the
remote. The remote LED indicator light will light up red during charging. Once fully
charged, the indicator light will turn off.
• Note: the remote has a small power consumption. It is recommended to not charge
the remote frequently.
Gimbal Stabiliser Calibration
• When your smart phone is not perfectly horizontal or vertical with the product, the
gimbal requires calibration.
• Place the gimbal sele stick on a horizontal surface, with the power button on the
gimbal facing up.
• Turn on the gimbal function, and press the power button 6 times to enter
calibration mode. The gimbal will freely rotate. Press the power button again to
start calibration, the gimbal LED indicator will ash green rapidly.Do not move the
gimbal selîž‚e stick during calibration. After approximately 5 seconds, it will auto exit
calibration mode.
• The gimbal stabiliser calibration is now completed.
Taking Pictures/Videos Through The Remote
• Press the button on the remote to take a photo or video. The LED indicator will
ash green once.
• To set up for use as a tripod, push out the 3 tripod legs on the bottom of the
handle.
• Once nished, ensure to power off the remote by pressing and holding the
button, the LED indicator will ash green then turn off.
• Note: for android devices , go to your camera settings and set your volume key as
the capture function.


Product specificaties

Merk: Bauhn
Categorie: Speaker
Model: ABGSS-1223

Heb je hulp nodig?

Als je hulp nodig hebt met Bauhn ABGSS-1223 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bauhn

Handleiding Speaker

Nieuwste handleidingen voor Speaker