Barox PC-INJ-95-B Handleiding

Barox Netwerkkaart/adapter PC-INJ-95-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Barox PC-INJ-95-B (8 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

User Manual

Industrial Injector

PC-INJ-30W

PC-INJ-30W-B

PC-INJ-60W

PC-INJ-60W-B

PC-INJ- -B95

Version 11.2019

Introduction

This rugged designed industrial PoE injector is equipped with a 30W/60W/95W PSE port. This

PSE port can be powered by 48-56 VDC input voltage. With its multi-purpose design, it can also

be Din-Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance,

traffic monitoring and security applications in critical environments. It can tolerate -40°C to 75°C

in harsh environments to perform a reliable network. This product has been rigorously tested in

harsh environments for your security, transportation, and telco applications.

Note

Always make sure the total length of the TX cable DOES NOT exceed 100 meters. Total length

is defined as length A + length B.

Length A + Length B < 100 meters

POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100

meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more

reliable the network will be. When connecting to a poor-quality PD, it cannot generate a strong

enough signal for the remote switch. Always make sure you have a high-quality PD to perform

your desired network.

Remote Switch

Installation package

This unit can be din-rail mounted or wall-mounted. Din-rail brackets and -mount brackets are wall

included.

Power connection

This unit provides a 4 pin terminal block. It can be operated using 48-56VDC power source.

Always make sure your input voltage is within this supported voltage range.

To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,

+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a

neutral wire to the ground screw.

+V1- is for power input one connection.

+V2- is for power input two connection.

Power connecting procedure:

STEP 1 – Take out 4 pin terminal block located in

the included mounting kit package.

STEP 2 – Connect power wires to +V1- or +V2-

with corresponding polarity. Connect the

grounding wire to the ground screw.

STEP 3 – Plug into terminal block socket shown

above. Polarity needs to match V+ and V-.

WARNING Always SHUT OFF power source to connect power wire.--

WARNING Any exceeded input voltage will not make this unit function and may --

damage this unit.

+V1- +V2-

Product specificaties

Merk:	Barox
Categorie:	Netwerkkaart/adapter
Model:	PC-INJ-95-B
Kleur van het product:	Zwart
Breedte:	32 mm
Diepte:	82 mm
Hoogte:	104 mm
LED-indicatoren:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	FCC, IP30
Duurzaamheidscertificaten:	CE
Voldoet aan industriestandaarden:	EN55022/24\nEN50155\nEN50121-3-2\nEN50121-4\nEN55011\nEN60950-1\nEN50155 / EN60068-2-6\nEN50155 / EN60068-2-27\nEN50155 / EN600-2-32
Ingangsspanning:	24 - 56 V
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Uitgangsvermogen:	95 W
Temperatuur bij opslag:	-40 - 85 °C
Stroomspanning bescherming:	Overbelasting
Luchtvochtigheid bij opslag:	5 - 95 procent
Rack-montage:	Nee
Naleving van duurzaamheid:	Ja
Elektromagnetische compatibiliteit:	CE, FCC, VCCI
Veiligheid:	UL 60950-1, IEC EN60950-1
Ethernet interface type:	Gigabit Ethernet
RJ-45 uitgang ports:	1
RJ-45 invoer ports:	1
Stroomverbruik (typisch):	2 W
Bedrijfstemperatuur (T-T):	-40 - 75 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal producten inbegrepen:	1 stuk(s)
Ondersteundende kabel types:	Cat5e, Cat6, Cat7
Stroom via Ethernet (PoE):	- V
Pintoewijzing & polariteit:	Mode A: Pin 1 (V-), 2 (V-), 3 (V+), 6 (V+), Mode B: Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-)