Barco R9801295 Handleiding
Barco
Projector accessoire
R9801295
Lees hieronder de 📖 handleiding in het Nederlandse voor Barco R9801295 (2 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Mounting
Instructions
Lens Support Kit
Support Kit
1
The lens support kit is designed to be used with projectors using the EN47 Wide Angle lens. The purpose is to secure
the preferred lens settings when correctly adjusted, preventing them from being altered unintentionally. It also supports
the lens itself, which is important especially in ceiling mounted environments.
The support kit is delivered fully assembled and consists of the following parts:
2Mount i ng t he ki t
The lens support kit is mounted as follows:
Positioning: Position the lens support kit over the projector bottom as shown in illustration A below, with the lens
support bracket (no 1 in /section 1 illustration) pointing towards the lens.
Locate ceiling mount screw holes: Place the kit so that the holes in the bracket match the holes in the projector
intended for ceiling mounting (4 x M6), see illustration B.
Tighten screws: Enter the screws and tighten so that the bracket is firmly attached to the projector. Make sure not
to overtighten. Do not yet tighten the 2 locking screws on the lens support bracket below the lens, see illustration C.
These have to remain loose for positioning of the lens.
3 Adjus t ing and s e cur i ng t he le ns
Do the following to adjust the lens and securing it with the lens support:
• Adjust the lens to desired position for optimal picture size and quality for the intended use. Make sure the
2 locking screws are loose to give full freedom to move the lens around. Please refer to projector user
documentation/web for adjustment procedure.
• When the picture has been adjusted according to the requirements, lock the lens positioning by tightening
the 2 locking screws (A) and entering and fastening the lens lock screw (B) into the lens itself. Do not
overtighten.
1
2
3
4
1 Lens support
2 Lens support baseplate
3 Accessories rail
4 Locking screws
ACB
For further information on ceiling mounting of your projector please refer the user manual or
our web page
A Locking screws
B Lens lock screw
(use M6 screw with max 15mm length)
B
A
4Addi t iona l i nfor m a t ion
When mounting the lens support kit, please notice the following:
• Do not activate lens shift function on keypad or via remote control when the lens is in locked position on the
lens support bracket.
• To avoid activating lens adjustment as mentioned above, go to the projector menu and deactivate the lens
shift function.
• Make sure not to overtighten any of the screws as this may cause damage.
Please notice that the lens support kit is primarily intended for ceiling mounted projectors, but it may
also be used in other positions (as long as it is according to projector mounting limitations).
601-0352-00
Ple ase vi s i t our we b s i t e t o downloa d prod uc t m a nu als or t o find r e la t ed inf ormat ion www.barco.com
Product specificaties
| Merk: | Barco |
| Categorie: | Projector accessoire |
| Model: | R9801295 |
Heb je hulp nodig?
Als je hulp nodig hebt met Barco R9801295 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Projector accessoire Barco
19 Juni 2023
10 Juni 2023
4 Juni 2023
11 Mei 2023
5 Mei 2023
3 Mei 2023
1 Mei 2023
29 April 2023
27 April 2023
24 April 2023
Handleiding Projector accessoire
- Projector accessoire Sony
- Projector accessoire Casio
- Projector accessoire Panasonic
- Projector accessoire Auna
- Projector accessoire BenQ
- Projector accessoire Hitachi
- Projector accessoire InFocus
- Projector accessoire Manhattan
- Projector accessoire Nec
- Projector accessoire Nedis
- Projector accessoire Newstar
- Projector accessoire Peerless
- Projector accessoire Sanyo
- Projector accessoire Speaka
- Projector accessoire Viewsonic
- Projector accessoire Vogels
- Projector accessoire XGIMI
- Projector accessoire Omnitronic
- Projector accessoire Optoma
- Projector accessoire Sanus
- Projector accessoire Vision
- Projector accessoire Chief
- Projector accessoire Gabor
- Projector accessoire Lindy
- Projector accessoire Da-Lite
- Projector accessoire AV:link
- Projector accessoire Peerless-AV
- Projector accessoire Projecta
- Projector accessoire Chipolino
- Projector accessoire Konig & Meyer
- Projector accessoire Roadinger
- Projector accessoire Tempest
- Projector accessoire Premier Mounts
- Projector accessoire Gravity
- Projector accessoire Elite Screens
- Projector accessoire Kingpin Screens
- Projector accessoire Kanto
- Projector accessoire V7
- Projector accessoire Christie
- Projector accessoire Unicol
- Projector accessoire My Wall
- Projector accessoire Smart Media
Nieuwste handleidingen voor Projector accessoire
22 November 2024
22 November 2024
22 November 2024
19 November 2024
19 November 2024
18 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024