Bang And Olufsen BeoLab 4000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Bang And Olufsen BeoLab 4000 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 98 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
BeoLab 4000
Guide
WARNING: To reduce the risk of re or
electric shock, do not expose this appliance
to rain or moisture. Do not expose this equip-
ment to dripping or splashing and ensure
that no objects lled with liquids, such as
vases, are placed on the equipment.
To completely disconnect this equipment
from the AC Mains, disconnect the mains
plug from the wall socket. The disconnect
device shall remain readily operable.
The lightning ash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of un-
insulated “dangerous voltage” within the
product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and main-
tenance (servicing) instructions in the
literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualied
service personnel.
Daily use
When you have nished setting
up the loudspeakers as described
on the following pages, connect
the entire system to the mains
supply. The indicators light up
in red, indicating that the loud
speakers are in standby, ready
to be used. The loud speakers
are designed to be left in this
standby mode when not in use.
Cleaning the loudspeaker
Clean dusty surfaces using a dry,
soft cloth. If necessary, remove
grease stains or persistent dirt with
a soft, lint-free cloth which you
have dipped in lukewarm water
and wrung rmly.
You can clean the front cloth with
a vacuum cleaner with a brush
nozzle, and set to the lowest level.
Clean the cooling ns on the rear
using a soft brush or a vacuum
cleaner.
Switching on and off
When you switch on your system,
the loudspeakers switch on
simultaneously, and the indicator
lights turn green. When you switch
the sys tem off again the loud-
speakers also switch to standby.
If the loud speakers are connected
to a non-Bang & Olufsen system
they switch on when a signal is
received from the sys tem. They
switch off a few minutes after the
signal has disappeared.
Never use alcohol or other solvents
to clean any parts of the loud-
speaker!
BANG & OLUFSEN
3
Indicator light
NOTE! Prolonged listening at high
volume levels may cause hearing
damage.


Product specificaties

Merk: Bang And Olufsen
Categorie: Speaker
Model: BeoLab 4000

Heb je hulp nodig?

Als je hulp nodig hebt met Bang And Olufsen BeoLab 4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bang And Olufsen

Handleiding Speaker

Nieuwste handleidingen voor Speaker