Bang And Olufsen BeoLab 3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Bang And Olufsen BeoLab 3 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Guide
BeoLab 3
Acoustic Lens Technology –
manufactured under license from
Sausalito Audio Works.
To get access to the approval labels,
remove the BeoLab 3 top cap.
NOTE! Prolonged listening at high
volume levels may cause hearing
damages
WARNING: To prevent fi re or electric
shock, do not expose this appliance
to rain or moisture. Do not expose
this equipment to dripping or
splashing and ensure that no objects
lled with liquids, such as vases, are
placed on the equipment.
To completely disconnect this
equipment from the AC Mains,
disconnect the power supply cord
plug from the AC receptacle.
This symbol indicates that a
dangerous voltage
constitut ing a risk of electric
shock is present within this
unit.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this
unit.
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualified
service personnel.
Daily use
When you have nished setting up the loudspeakers as described on
the following pages, connect the entire system to the mains. The
loudspeakers are designed to be left in standby when not in use.
Switching on and off
When you switch on your system,
the loudspeaker switches on
simul taneously, and the indicator
light shines green.
When you switch off your system,
or mute the sound, the indicator
light turns red.
Cleaning
Clean the loudspeaker surfaces
using a soft, lint-free cloth which
you have dipped in lukewarm
water and wrung fi rmly.
Never use alcohol or other solvents to
clean any parts of the loudspeaker!
Loudspeaker protection
The loudspeaker is equipped with a
thermal protection system which
prevents overheating. If an error
occurs – or the speaker units
become overheated – the system
automatically switches the
loudspeaker to standby, and the
indicator light turns yellow.
To restore the situation:
> Disconnect the loudspeaker from
the mains.
> Allow the system time to reset
(approximately 35 minutes).
> Reconnect the loudspeaker to
the mains again.
Should the problem persist, contact
your Bang & Olufsen retailer.
!
3
Indicator light: In daily use the
indicator light shines either red
(standby) or greAen (playing). If an
error occurs – or the speaker units
become overheated – the light
switches to yellow.
Caution: Do not touch the BeoLab 3
top speaker membrane!


Product specificaties

Merk: Bang And Olufsen
Categorie: Speaker
Model: BeoLab 3

Heb je hulp nodig?

Als je hulp nodig hebt met Bang And Olufsen BeoLab 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bang And Olufsen

Handleiding Speaker

Nieuwste handleidingen voor Speaker