B-Air Grizzly GP-1 ETL Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor B-Air Grizzly GP-1 ETL (8 pagina's) in de categorie Huisdier. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
HP
OPERATION
SAFETY
SERVICE
WARRANTY
CONTACT
SPECIFICATIONS
TROUBLESHOOTING
Instruction Manual
READ AND SAVE
THESE INSTRUCTIONS
GP-1 ETL
GRIZZLY
IDEAL FOR
PET INDUSTRY
INFLATABLE INDUSTRY
WATER DAMAGE RESTORATION
POWERFUL 25 FOOT
CORD
3 SPEEDS
SAFETY
CERTIFIED
YEAR
WARRANTY
GROUND
PLUG
Introduction to Grizzly GP-1-ETL
B-AIR.COM
Your new B-Air Grizzly GP-1-ETL blower and dryer has a 1 HP high-efficiency
motor with the following features:
• State-of-the-art construction
• Safety screens on open vents
• Easy-to-use carrying handle
• A kick stand, which allows for added height, when needed.
• 3-speed switch
Operation/Use
This high-air volume blower is intended to dry, inflate and move air. It is suitable
for a variety of applications.
A) Carefully place the Grizzly B-Air unit on a stable, flat and dry surface during
operation.
B) Use free standing or with attachments
(1) The Grizzly B-Air unit can be positioned to aim airflow across flat surfaces
or it can be angled upward. Raise or lower the attached stand for higher
adjustment.
(2) Pet Drying - attach the den drying kit for multiple cage drying.
(3) Inflatables - attach an inflatable tube around the exhaust opening using
straps, velcro or any other form of tightener.
C) Turn on the switch to desired speed and make sure it is operating correctly.
D) All blowers/dryers in operation must be supervised at all times.
Warning
All blowers in operation must be supervised and attended to, at all times.
The use of a 3-prong to a 2-prong adapter is prohibited; use only a 3-prong
adapter.
If the power supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons, in order to avoid a hazard.
3-SPEED MAIN SWITCH
CARRYING HANDLE
AIR INTAKE
AIR OUTLET
KICK STAND
B-AIR.COM
Storage
Store unit indoors, in a clean, dry environment to ensure long life.
Safety
1) Keep children and pets away from unit when in operation and/or plugged in.
2) Do not put fingers or other objects in unit while in operation and/or plugged in.
3) To avoid electric shock, do not operate in pooled water.
4) Unit must be kept dry at all times, including motor, wiring and exterior. If unit
becomes wet, thoroughly dry before next operation.
5) Indoor use: Use only with a grounded plug and/or extension cord to avoid risk
of electrical shock or fire. Remember to never use a cord with any kind of
damage or wear.
6) Make sure the power source is sufficient to meet the requirements of the
dryer/air mover.
7) To prevent overheating the unit, keep air intake clear at all times.
8) Clogging or blocking the air intake could result in a fire or an electrical hazard.
9) In order to avoid injury, do not remove any screens or safety guards from the
unit. Prevent objects from coming in contact with the dryer’s wheel. If the unit
is damaged in this manner, it will void your warranty.
10) Do not operate unit close to any hazard/dangerous areas: explosive gases,
flammables, heaters and unventilated environments to avoid explosions or
electrical hazards.
11) Do not use any form of speed control device; doing so may cause fire or injury.
12) Always place dryer/air mover on a smooth and level surface for safe operation.
13) Do not use unit if damaged.
14) Unplug unit before cleaning or servicing.
15) All dryers/air movers in operation must be supervised at all times.
16) Do not expose to rain, water or snow.
17) Unit must be connected to a GFCI (Ground Fault Circuit Interrupter) protected
receptacle.
Warning!
All dryers/air movers in operation must be supervised and attended to, at all times.
The use of a 3-prong to a 2-prong adapter is prohibited; use only a 3-prong
adapter.
If the power supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons, in order to avoid a hazard.
Limited Warranty
Proof of purchase is required on all warranty claims.
2-year warranty
B-Air will cover all parts (except power cord) within two (2) years of purchase.
B-Air will pay repair costs and one-way UPS ground service shipping to your
location within the 48 contiguous states. Proof of purchase is required.
Product specificaties
| Merk: | B-Air |
| Categorie: | Huisdier |
| Model: | Grizzly GP-1 ETL |
Heb je hulp nodig?
Als je hulp nodig hebt met B-Air Grizzly GP-1 ETL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Huisdier B-Air
7 Juli 2023
2 Juli 2023
Handleiding Huisdier
- Huisdier Kerbl
- Huisdier Petsafe
- Huisdier Tesla
- Huisdier Trixie
- Huisdier Tronic
- Huisdier Voss
- Huisdier Wahl
- Huisdier Zoofari
- Huisdier OBH Nordica
- Huisdier Kayoba
- Huisdier Ferplast
- Huisdier Andis
- Huisdier Cat Mate
- Huisdier SureFlap
- Huisdier Adori
- Huisdier Catit
- Huisdier Eyepower
- Huisdier Zooplus
- Huisdier Carlson
- Huisdier Nexxt
- Huisdier Physa
- Huisdier Pet Gear
- Huisdier Bliss Outdoors
- Huisdier Closer Pets
- Huisdier Weenect
- Huisdier Orbiloc
- Huisdier Lentek
Nieuwste handleidingen voor Huisdier
18 November 2024
17 November 2024
5 November 2024
5 November 2024
4 November 2024
4 November 2024
7 Oktober 2024
7 Oktober 2024
7 Oktober 2024
7 Oktober 2024