Azden SMH-X Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Azden SMH-X (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
USER MANUAL
Thank you for purchasing the SMH-X Shock Mount Microphone Holder. It is
designed to isolate your Azden shotgun microphone from handling noise and
vibration. In addition to Azden brand microphones, this shock mount is
compatible with many other third-party shotgun microphones. Two sizes of
microphone clips are provided for a wider range of compatibility. For a list of
compatible microphones, please see azden.com.
Please read your user manual carefully.
PRINTED IN JAPAN 060-XXXXXC01
www.azden.com
e-mail:sales@azden.com
USA Office: 200 Valley Rd, STE 101, Mt. Arlington, NJ 07856
TEL: +1 (973) 810-30670 FAX: +1 (973) 810-30676
CAUTION
● Do not use or store this product in environments that are extreme in temperature,
moisture or dust.
Do not drop or hit with force. Use with care.
Do not store this product under heavy weight or physical stress as permanent
deformation may occur.
● If dirty, wipe clean with a soft cloth. Do not use chemical cleaning agents.
KEY FEATURES
The clips provided with the SMH-X mount can accomodate microphones with
diameters of 18 mm to 22 mm.
The SMH-X can be mounted on top of cameras that provide a standard size
accessories shoe or on tripods, boom poles, or accessory bars that provide a
1/4” - 20 size thread.
PACKAGE CONTENTS
ASSEMBLY AND MOUNTING
SMH-X
SHOCK MOUNT HOLDER
Small Microphone Clips (Ø 18 mm - 20 mm)
Mounting Base
Select the size microphone clip that best suites your microphone.
Install the clips into the mounting base using the screws as pictured.
Tighten the screws with a
Phillips head screwdriver.
Once the clips are installed,
your SMH-X mount is ready to
be used with your microphone.
Clip Screws
Large Microphone Clips (Ø 21 mm - 22 mm)
For camera mounting, slide the shoe of the SMH-X (bottom) into the shoe
mount of your camera and tighten the thumb-wheel by turning it clockwise.
CORPORATION


Product specificaties

Merk: Azden
Categorie: Niet gecategoriseerd
Model: SMH-X

Heb je hulp nodig?

Als je hulp nodig hebt met Azden SMH-X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Azden

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd