Azden PRO-XD Handleiding

Azden Microfoon PRO-XD

Lees hieronder de 📖 handleiding in het Nederlandse voor Azden PRO-XD (8 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

PRO-XD

DIGITAL WIRELESS

MICROPHONE SYSTEM

OPERATION MANUAL

SAFETY CAUTION

Congratulations on purchasing the Azden® i-Coustics™

PRO-XD Digital Wireless Microphone System. The

PRO-XD was designed to provide amateur and semi-

professional video producers alike with a high quality,

yet affordable wireless audio solution.

The PRO-XD is Azden’s first wireless system to use

2.4GHz digital wireless technology, which vastly

improves on sound quality (over VHF) and eliminates

interference issues with radio and TV frequencies.

Compatible with DSLR cameras, camcorders,

smartphones, tablets and computers, the PRO-XD is a

versatile wireless microphone and its compact and

simple design makes it very user friendly.

Each PRO-XD system includes a body-pack transmitter

(PRO-XDT), receiver with attached shoe mount (PRO-

XDR), a lapel microphone (EX-503XD), audio output

cable, a TRRS adapter cable (HX-i) and a USB

charging cable with AC adapter.

WARNING: DO NOT ATTEMPT TO OPEN THE CASING OR MAKE ANY MODIFICATION TO THE

INTERNAL ELECTRICAL COMPONENTS. ELECTRIC SHOCK OR INJURY MAY RESULT.

WARNING: ANY UNAUTHORIZED MODIFICATION TO THIS PRODUCT WILL VOID ANY APPLICABLE

WARRANTIES.

WARNING: DO NOT STORE OR OPERATE THIS PRODUCT NEAR A HEAT SOURCE OR IN AN

ENVIRONMENT OF EXTREME TEMPERATURES. AVOID EXPOSURE TO RAIN OR ANY OTHER SOURCE

OF MOISTURE. DO NOT SUBMERGE IN WATER. IF EXTERIOR IS EXPOSED TO WATER, WIPE DRY

BEFORE USE.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).

Radiation Exposure Statement

This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance

of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules and with RSS-247 of the Industry Canada Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux

deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

PRO-XDT PRO-XDR

EX-503XD

HX-i TRRS

Adapter

AC Power

Adapter

USB-mini to

USB-A Cable Audio Output

Cable

PRO-XD Kit Contents

PRO-XDT Transmitter

Parts And Functions

①

Antenna

②

Power & Sync Button

③ Input Selector

④ Aux Input

⑤ Belt Clip

⑥ Reset

⑦ Power Indicator

⑧ Signal Indicator

⑨ Microphone Input

⑩ Mini USB Charging Port

Operation

Power On/Off

Turn on the PRO-XDT by pressing and holding the Power Button for 1 second. If the unit has sufficient ②

battery power the Power Indicator light will be green. This light will turn red when the remaining battery ⑦

life is low. To turn off the transmitter, press and hold the Power Button for 3 seconds until the Power ②

Indicator light goes off.⑦

Signal Indicator

The Signal Indicator on the transmitter has two statuses. When the light is lit solid green it means the ⑧

unit is broadcasting a wireless signal. If this light is flashing green, it indicates that the transmitter is in sync

mode and trying to establish a connection. See detailed instructions on pairing on page 4.

Input Selector

Select the audio input source with the Input Selector . This switch has 3 settings. Moving the switch ③

towards the microphone icon selects the Microphone Input (Fig. 1). Moving the switch towards the words ⑨

“AUX IN” selects the Aux Input (Fig 2.). Setting the switch in the middle will allow you to use both inputs ④

simultaneously (Fig. 3).

Microphone & Aux Inputs

The PRO-XDT has two audio inputs. The Microphone Input is a 3.5mm TRRS jack located at the top of ⑨

the unit and is designed to accept a mono, microphone level signal. Plug the EX-503XD lapel microphone in

to this input. The Aux Input is a 3.5mm TRS jack located on the side of the unit and is designed to accept ④

a stereo, line level signal. This can be used for transmitting audio from the headphone output of a

smartphone or line out of an audio mixer. Additional cables and adapters (not included with this system) may

be required in order to connect line level equipment.

Charging

To charge the transmitter, use the included USB cable and AC adapter. Plug the mini end of the USB cable

into the receiver’s Mini USB Charging Port and then plug the USB-A end into the included AC adapter (to ⑩

be plugged into a power socket). Alternatively, the USB-A end of the cable may be plugged into a computer

USB port. Charge time for an empty battery is approximately 3.5 hours. During charging the Power Indicator

⑦ will be red; once the battery is full, this light will turn off.

8 7

Fig. 1 Fig. 2 Fig. 3

Product specificaties

Merk:	Azden
Categorie:	Microfoon
Model:	PRO-XD
Microfoontype:	Lavalier-microfoon
Frequentie:	2400 MHz
Signaal/ruis-verhouding:	80 dB
Receiver afmetingen (B x D x H):	48 x 14 x 79 mm
Ontvanger type:	Cameragemonteerde ontvanger
Geluidsdruk niveau (max):	90 dB
Zendretype:	Bodypackzender
Receiver gewicht:	68 g
Transmitter afmetingen (WxDxH):	48 x 14 x 79 mm
Transmitter gewicht:	62 g
Aantal ontvangers inbegrepen:	1
Aantal zenders inbegrepen:	1
Aantal microfoons inclusief:	1
Transducerprincipe microfoon:	Condensatormicrofoon