AXI DerbyRun180 Handleiding

AXI Niet gecategoriseerd DerbyRun180

Lees hieronder de 📖 handleiding in het Nederlandse voor AXI DerbyRun180 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

User manual

Handleiding bewaren voor later gebruik

Keep instructions for later use

Anleitung zum späteren Gebrauch aufbewahren

Conserver la notice pour usage ultérieur

Guardar estas Instrucciones para su uso future

Conservare l’istruzioni per uso successivo

WARNING

CHOKING HAZARD

small parts

Not suitable for children under

36 months

THE TOY IS TO BE ASSEMBLED BY

AN ADULT.

WARNING

Potential hazard description, e.g. In

unassembled state contain potentially

hazardous sharp points, so please

keep out of baby's reach

DerbyRun180

A030.403.00

date: 10-2015 www.axi.com info@axi.com

DerbyRun180

A030.403.00

2 PCS

1 PCS

1 PC

2 PCS

date: 10-2015 www.axi.com info@axi.com

1. Sort out the different components from each other according to the picture above.

2. Assemble the base (4, 5, 6, 7) and then assemble the front part (1, 2, 5) of the frame including

the crossbar and the L-bend pipes. The push buttons help in securing the pipes into position.

3. The back supports (3) must be assembled after step 2 has been completed.

4. The open end of back support ts into the pipe collar on the rear connectors welded on the

base of the goalpost. The top and front part of the back support must be secured with the L-bend

pipes using the bolt (B). The bolt can be tightened using an Allen Key (included in the kit).

5. Unfasten all the zippers and/or hook & loop connectors on the net.

The zipped sleeves are tted on the front crossbar and on the rear crossbar of the goalpost.

NOTE:If you are standing opposite the goalpost and facing it from the front, the print on the

net and on the top/front crossbar sleeve must be facing you. Invert the net if this is not the case.

6. The sleeves with hook and loop fasteners sewn on them

wraps around the 2x vertical side supports (on the front)

and the 2x horizontal side supports (on the base) respectively.

7. The Target Wall shall be secured on the front of the goalpost

by meshing the hook and loop fasteners on the wall with

the fasteners on the net.

8. The elastic loops wrap around the radius of the L-bent pipes

and then secured into place using the buttons.

9. The goalposts include a set of ground anchors (8) and a fastener nut (A). Insert the anchor

into the ground through the hole located on the front of the base of the goalpost. The threaded

end of the anchor must protrude out of the goalposts. After doing this, thread in tightly the

fastener nut on the threaded end the protruding anchor.

The goalpost is now ready to use.

DerbyRun180

A030.403.00

ASSEMBLY

date: 10-2015 www.axi.com info@axi.com

Product specificaties

Merk:	AXI
Categorie:	Niet gecategoriseerd
Model:	DerbyRun180
Gewicht:	17000 g
Breedte:	1800 mm
Diepte:	600 mm
Hoogte:	1200 mm
Gewicht verpakking:	18000 g
Breedte verpakking:	1150 mm
Diepte verpakking:	130 mm
Hoogte verpakking:	650 mm
Aanbevolen leeftijd (min):	3 jaar
Type verpakking:	Doos
Montagewijze:	Vrijstaand
Land van herkomst:	Indië
Frame kleur:	Zwart
Frame materiaal:	Metal, Plastic, Steel
Weerbestendig:	Ja
Montage vereist:	Ja
Producten per pallet:	20 stuk(s)
Verpakkingsvolume:	97175 cm³
Producten per intermodale container (40 ft - High Cube):	689 stuk(s)
Doelpubliek:	Kinderen
Minimum bestelhoeveelheid:	1 stuk(s)
Niet voor kinderen 0 - 3 jaar:	Ja
Eenvoudig te monteren:	Ja
Montagetijd:	15 min
Kleur doelnet:	Zwart
Talen op verpakking:	Engels
Doelscherm:	Ja
Uitsluitend voor huishoudelijk gebruik:	Ja
Gebruiken onder direct toezicht van een volwassene:	Ja
Materiaal net:	Polyester