AXESS AXTC-TY1 Handleiding

AXESS Niet gecategoriseerd AXTC-TY1

Lees hieronder de 📖 handleiding in het Nederlandse voor AXESS AXTC-TY1 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
AXTC-TY1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 1/10/25 INSTAXTC-TY1
INTERFACE FEATURES
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape
• Wire cutter
• Zip ties
TABLE OF CONTENTS
Vehicle Applications 2 ..............................................
Interface Connections............................................3
Programming 4 .........................................................
Troubleshooting.....................................................5
Steering Wheel Control and Data Interface
Fits Lexus/Toyota 2002-2019
INTERFACE COMPONENTS
• AXTC-TY1 interface
• LD-SWCX-TY1 harness
• 3.5mm adapter
Product Info
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
Visit for more detailed information about the product and up-to-AxxessInterfaces.com
date vehicle specific applications.
www.MetraOnline.com
MetraOnline.com may be used
to assist with dash assembly
instructions. Simply enter your
Year, Make, Model vehicle into the
Vehicle Fit Guide and look for the
Dash Kit Installation Instructions.
• Designed for amplified and non-amplified models
• Provides accessory power (12-volt 10-amp)
• Provides NAV outputs (illumination, parking brake, reverse,
speed sense)
• Retains audio controls on the steering wheel and allows dual
assigning of steering wheel control buttons
• Designed to be compatible with all major radio brands
• Auto detects vehicle type, radio connection, and preset controls
• Retains memory settings even after battery disconnection or
interface removal (non-volatile memory)
• Retains balance and fade (excludes amplified models)
• Retains the 3.5mm AUX-IN jack
• Micro “B” USB updatable
2
APPLICATIONS
LEXUS
ES Series 2007-2012 ........................................................................
ES Series (w/ multi disc) 2002-2006 .............................................
IS Series 2002-2005 ........................................................................
RX Series 2004-2008 .......................................................................
TOYOTA
4-Runner 2003-2019 .......................................................................
Avalon 2011-2018 ..............................................................................
(Camry) Solara 2004-2008 ............................................................
Camry (w/o nav) 2012-2013 ...........................................................
Camry.............................................................................2007-2017
Corolla 2003-2018 ............................................................................
FJ Cruiser......................................................................... 2011-2014
Highlander 2008-2019 .....................................................................
Matrix 2005-2012 .............................................................................
Prius/Prius V (NAV) 2013-2016 .......................................................
Prius 3rd Gen (w/o nav) 2012-2015 ................................................
Plug-In (PHV) (w/o nav) 2012-2015 ...............................................
Prius 2004-2011 ...............................................................................
Rav-4 2004-2018 .............................................................................
Sequoia 2005-2019 ..........................................................................
Sienna 2004-2017 ............................................................................
Tacoma 2005-2019 ..........................................................................
Tundra 2006-2019 ............................................................................
Tundra (Double Cab) 2004-2005 ...................................................
Venza (w/ SD card based nav) 2013-2014 .....................................
Venza 2009-2016 .............................................................................
VEHICLE APPLICATIONS
3
REV. 1/10/25 INSTAXTC-TY1
3
INTERFACE CONNECTIONS
Front
Rear
Sub
AUX-IN
Rear View
SWC
Aftermarket Radio
(Your radio’s features may vary)
*BACK*
LD-SWCX-TY1
Green - Rear left speaker + output
Green/Black - Rear left - speaker output
Green/Purple - Reverse Signal
Light Green - Parking brake
Orange - Illumination
Purple - Rear right + speaker output
Purple/Black - Rear right - output
Gray - Front right + speaker
Gray/Black - Front right - speaker
White - Front left + speaker
White/Black - Front left - speaker
For models , remove voltage limiter extensions NON-AMPLIFIED ONLY
from the & Wire(s). GREY, GREY/BLACK, WHITE WHITE/BLACK
Blue -Antenna turn on
Blue/Pink - VSS/Speed-Sense
Red - Accessory power
Yellow - Battery wire
Black - Ground wire
Black/White - Shield GND
20-Pin
Vehicle Connectors
Radio Connections
Interface
LED Light
Reset Button
Note: The 2’ long harness with a 24-pin
connector is a service harness for setting
the clock with the factory radio. Run this
harness to a location where it can be easily
accessed, yet hidden.
3.5mm Adapter (for vehicles with Steering wheel
controls or aftermarket radios with a wire for SWC)
Boss (with SWC wire): Key 1 (Gray) - Brown
Kenwood / JVC (with SWC wire): Blue/Yellow - Brown
XITE: SWC-2 - Brown
Key-A or SWC-1 - Brown
Key-B or SWC-2 - Brown/White
* After programming, assign SWC buttons within radio menu
Universal
Radio*
{
3.5mm Adapter for Vehicles without Steering wheel controls
1)
From the , tie the and wires together with3.5mm adapter Brown Brown/White
tape or connector
2)
Connect the to the 3.5mm jack from the 3.5mm adapter LD- WCX-TY1 HarnessS
3) AXTC-TY1 Program the per the instructions on page 4. Disregard steps 4 & 5.

Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXTC-TY1

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXTC-TY1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd AXESS

AXESS

AXESS AXTC-TY1 Handleiding

27 Januari 2025
AXESS

AXESS AXDI-FOC Handleiding

27 Januari 2025
AXESS

AXESS AXAMP-CH4 Handleiding

27 December 2024
AXESS

AXESS AX-LOC Handleiding

27 December 2024
AXESS

AXESS AXAMP-CH5 Handleiding

27 December 2024
AXESS

AXESS AXAMP-FD1 Handleiding

27 December 2024
AXESS

AXESS AXBUCS-MZ286V Handleiding

9 September 2024
AXESS

AXESS 99-7014HG Handleiding

29 Augustus 2024
AXESS

AXESS AXGM-17 Handleiding

29 Augustus 2024
AXESS

AXESS AXGMLN-34 Handleiding

29 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Trio Lighting

Trio Lighting Rondo 522610331 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Bolou 872810606 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Presley 874470106 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Cassini 877110207 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Havanna 829910407 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Gemini 850010132 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Gemini 850010232 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Gemini 850010332 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Gemini 850010432 Handleiding

4 Februari 2025
Trio Lighting

Trio Lighting Sam 680611206 Handleiding

4 Februari 2025