AXESS AXLOC4M-150 Handleiding

AXESS Niet gecategoriseerd AXLOC4M-150

Lees hieronder de šŸ“– handleiding in het Nederlandse voor AXESS AXLOC4M-150 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
AXLOC4M-150
INSTALL ATIO N I NSTRUCTI O NS
REV. 12/13/19Ā© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate ā€¢ AxxessInterfaces.com
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Ampliļ¬er Remote Generator.
The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line
level audio that can be used by OEM ampliļ¬ers. It can also be used with OEM radios to add
aftermarket ampliļ¬ers. This device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket ampliļ¬er.
Features and speciļ¬cations
The LOC is able to handle 150 watts per channel continuous input without over heating.
The input circuitry is designed to correct the crossover distortion commonly found on
standard LOCs while providing a high to low level step down of 6:1. Output audio level is
inļ¬nitely adjustable using the onboard, high quality potentiometers. The remote output
or ampliļ¬er trigger is rated at 500mA (+12V) and will easily handle an outboard relay if
additional current is needed. The remote output will trigger instantaneously when the LOC
detects a DC voltage on the white, left + audio input wire above 5V or a very low audio
signal. It will shut off 60 seconds after no signal is detected.
Installation
The LOC should be installed on a stereoā€™s speaker output wires or the output wires on an
OEM ampliļ¬er of up to 150 watts per channel. These wires can be found behind the stereo
in the dash, on the output of an OEM ampliļ¬er, or on the input terminals on the OEM
speakers. Please refer to the wiring diagram for the input connection details.
Continued on next page
AXLOC4M-150
INSTALL ATIO N I NSTRUCTI O NS
REV. 12/13/19Ā© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate ā€¢ AxxessInterfaces.com
Wire color and function
The audio and power input wire colors are an EIA standard for car stereo applications as follows:
Input harness
White = left front (+) input
White/Black = left front (-) input
Gray = right front + input
Gray/Black = right front (-) input
Green = left rear (+) input
Green/Black = left rear (-) input
Purple = right rear (+) input
Purple/Black = right rear (-) input
Power harness
Yellow = battery +12v input
Black = power (-) ground input
Blue = remote +12v output
Brown = reference ground (-)
Note:
Be sure that all audio input connections are polarized or in phase with each other. Failure to do this will result in
poor bass response and low quality audio.
Adjusting the LOC for maximum performance: After completing all of the necessary connections, turn the LOC adjustment
pots all of the way down by rotating them completely counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment pots on the LOC
and turn it slowly clockwise until you notice audio distortion and then stop. Turn the remaining pots to the same position as
the previously adjusted pot. The audio set-up of the LOC is now complete and ready to be enjoyed.
K PNOWLEDGE IS OWER
Enhance your inst allat ion and fa bricat ion skills by
enrolling in t he most recogniz ed and spect ed re
mobile elect nics scho ol in our indust ry.ro
Log ont o www.installerinstit ute.com or ca ll
800-3 54-6782 for mo informat ion a nd take steps re
to ward a bet ter tomorrow.
Ā®
Metra recommends MECP
certiļ¬ed technicians
IMPORTANT
If you are having difļ¬culties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.

Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXLOC4M-150

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXLOC4M-150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd AXESS

AXESS

AXESS AXBUCS-MZ286V Handleiding

9 September 2024
AXESS

AXESS 99-7014HG Handleiding

29 Augustus 2024
AXESS

AXESS AXGM-17 Handleiding

29 Augustus 2024
AXESS

AXESS AXGMLN-34 Handleiding

29 Augustus 2024
AXESS

AXESS 99-7382HG Handleiding

29 Augustus 2024
AXESS

AXESS GMOS-12 Handleiding

29 Augustus 2024
AXESS

AXESS XSVI-1788-NAV Handleiding

29 Augustus 2024
AXESS

AXESS 99-7510HG Handleiding

29 Augustus 2024
AXESS

AXESS AXBUCS-NI246V Handleiding

29 Augustus 2024
AXESS

AXESS 99-3307G Handleiding

29 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Pioneer

Pioneer CA-R-PI.161 Handleiding

18 September 2024
Pioneer

Pioneer CA-R-ISU.002AE Handleiding

18 September 2024
Pioneer

Pioneer CA-R-VW.09PAE Handleiding

18 September 2024
Exquisit

Exquisit KGC231-60-E-050CB Handleiding

18 September 2024
Pioneer

Pioneer CA-R-PI.186 Handleiding

18 September 2024
Kidde

Kidde 900-0076 Handleiding

18 September 2024
Pioneer

Pioneer CA-R-PO.001 Handleiding

18 September 2024
Speco Technologies

Speco Technologies APCR620L Handleiding

18 September 2024
Pioneer

Pioneer CA-R-MAN.001 Handleiding

18 September 2024
Pioneer

Pioneer CA-R-IR.002 Handleiding

18 September 2024