AXESS AXLOC-NIS Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor AXESS AXLOC-NIS (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
AXLOC-NIS
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com Ā© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/6/22 INSTAXLOC-NIS
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the
ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
TOOLS REQUIRED
ā€¢ Crimping tool and connectors, or solder gun,
solder, and heat shrink
ā€¢ Tape ā€¢ Wire cutter ā€¢ Zip-ties
TABLE OF CONTENTS
Applications.............................................................1
Installation ............................................................. 2
Diagram .................................................................. 3
APPLICATIONS
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle speciļ¬c applications.
ā€¢ Designed to provide (2) channels of low-level audio output from the factory system.
ā€¢ Allows for the installation of an ampliļ¬er for speakers or subwoofers.
ā€¢ Gain Controller included to adjust the overall output.
ā€¢ 12v-500mA remote wire activated with signal sense.
ā€¢ 55-watts per channel.
ā€¢ Designed for non-ampliļ¬ed vehicles.
Note: A single pole double throw (SPDT) relay is recommended when installing multiple ampliļ¬ers.
KIT COMPONENTS
ā€¢ AXLOC-NIS Wiring Harness
ā€¢ Gain Controller
ā€¢ 12v-500mA Remote Wire
ā€¢ Auxiliary Cable
For dash disassembly instructions, refer to . Enter the year, make, and model of the vehicle in the for .metraonline.com Vehicle Fit Guide Radio Install Kits
Nissan LOC (Line Output Converter)
AXLOC-NIS
(for Non-Ampliļ¬ed Vehicles)
1995-2013
Inļ¬niti
FX35, FX45 2003-2008
G20 1995-1996
Nissan
200SX 1995-1998
240SX 1995-1998
350Z 2003-2009
Altima 1995-2006
Armada 2005-2007
Frontier 1998-2012
Hardbody Pickup 1995-1997
Maxima 1995-2006
Murano 2003-2007
Pathļ¬nder S 2008-2012
Pathļ¬nder 1995-2007
Pathļ¬nder Armada 2004
Quest 2004-2009
Sentra 1995-2006
Titan 2004-2012
Xterra 2000-2013
2
INSTALLATION
1.
Disconnect the harness from the factory
tuner and install the AXLOC-NIS harness
provided with this kit.
2. Mount the gain controller in a suitable
location, and connect the auxiliary cable
to the , then to the Gain BASS KNOB
Connector of the AXLOC harness.
3.
Install the aftermarket ampliļ¬er and
run an RCA pair (sold separately) to
the line converter.
4. Connect the remote wire, plug in the
device and secure all connections prior
to testing.
NOTE: If the vehicle is equipped with active
noise cancellation microphones (ANC), it is
recommended that they are disabled to prevent
potential noise when installing subwoofers.
3
REV. 12/6/22 INSTAXLOC-NIS
DIAGRAM
TO RADIO TO VEHICLE
Remote
Gain Cont.
Line Out Convertor Bass Knob (Top View)
Aux. Cable
Bass Knob (Front View)
LD-AXLOC-NIS
Connect
to Ground
Line Out Convertor
(Front View)
Output Level Adjustment
NOTE: If using external Bass knob,
make sure your ā€œOutput Level
Adjustmentā€ knob is turned all
the way down (turned all the way
to the left).


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXLOC-NIS

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXLOC-NIS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AXESS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd