AXESS AXLOC-HYKIA3 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor AXESS AXLOC-HYKIA3 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
AXLOC-HYKIA3
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com Ā© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/15/22 INSTAXLOC-HYKIA3
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the
ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
TOOLS REQUIRED
ā€¢ Crimping tool and connectors, or solder gun,
solder, and heat shrink
ā€¢ Tape ā€¢ Wire cutter ā€¢ Zip-ties
TABLE OF CONTENTS
Applications............................................................. 1
Installation ............................................................. 2
Diagram .................................................................. 3
APPLICATIONS
KIT COMPONENTS
ā€¢ AXLOC-HYKIA3 Wiring Harness
ā€¢ Gain Controller
ā€¢ 12v-500mA Remote Wire
ā€¢ Auxiliary Cable
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle speciļ¬c applications.
ā€¢ Designed to provide (2) channels of low-level audio output from the factory system.
ā€¢ Allows for the installation of an ampliļ¬er for speakers or subwoofers.
ā€¢ Gain Controller included to adjust the overall output.
ā€¢ 12v-500mA remote wire activated with signal sense.
ā€¢ 55-watts per channel.
ā€¢ Designed for non-ampliļ¬ed vehicles.
Note: A single pole double throw (SPDT) relay is recommended when installing multiple ampliļ¬ers.
Hyundai/Kia LOC (Line Output Converter)
AXLOC-HYKIA3 (for Non-Ampliļ¬ed Vehicles) 2017-Up
For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the Vehicle Fit Guide Radio Install Kits for .
Hyundai
Accent 2018-Up
Elantra 2017-Up
Elantra GT 2018-Up
IONIQ 2018-Up
Kona 2018-Up
Santa Fe 2019-Up
Santa Fe XL 2019
Sonata 2018-Up
Tucson 2019-Up
Veloster 2019-Up
Kia
Cadenza 2017-Up
Forte 2017-Up
Forte 5 2017-Up
K5 2021-Up
Optima 2019-2020
Sedona 2017-Up
Sorento 2017-Up
Stinger 2018-Up
2
INSTALLATION
1.
Disconnect the harness from the factory
tuner and install the AXLOC-HYKIA3
harness provided with this kit.
2. Mount the gain controller in a suitable
location, and connect the auxiliary cable
to the , then to the Gain BASS KNOB
Connector of the AXLOC harness.
3.
Install the aftermarket ampliļ¬er and
run an RCA pair (sold separately) to
the line converter.
4. Connect the remote wire, plug in the
device and secure all connections prior
to testing.
NOTE: If the vehicle is equipped with active
noise cancellation microphones (ANC), it is
recommended that they are disabled to prevent
potential noise when installing subwoofers.
3
REV. 12/15/22 INSTAXLOC-HYKIA3
DIAGRAM
TO RADIO TO VEHICLE
Remote
Gain Cont.
Line Out Convertor Bass Knob (Top View)
Aux. Cable
Bass Knob (Front View)
LD-AXLOC-HYKIA3
Line Out Convertor
(Front View)
Output Level Adjustment
NOTE: If using external Bass knob,
make sure your ā€œOutput Level
Adjustmentā€ knob is turned all
the way down (turned all the way
to the left).


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXLOC-HYKIA3

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXLOC-HYKIA3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AXESS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd