AXESS AXDSPX-MI2 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor AXESS AXDSPX-MI2 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
AXDSPX-MI2
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com Ā© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 12/7/21 INSTAXDSPX-MI2
Google Play Store Apple App Store
iOS 12.1 or higher
TOOLS & INSTALLATION ACCESSORIES REQUIRED
ā€¢ Crimping tool and connectors, or solder gun,
solder, and heat shrink ā€¢ Tape ā€¢ Wire cutter
ā€¢ Zip-ties ā€¢ Multimeter tester
TABLE OF CONTENTS
Installation Options ........................................................2
Installation ...................................................................... 2
Connections ................................................................. 3-4
Mobile App ................................................................. 5-14
Speciļ¬cations .................................................................15
Mitsubishi DSPX Interface w/Pre-Wired
Harness
(for non-ampliļ¬ed vehicles)
2007-Up
INTERFACE FEATURES
ā€¢ Includes a DSP (Digital Signal Processor)
ā€¢ Selectable 31 Band Graphic EQ or 5 Band Parametric EQ
ā€¢ 10 individually assignable outputs
ā€¢ Independent equalization on each of the 10 outputs
ā€¢ Independent high pass, low pass, and bandpass ļ¬lters
ā€¢ Each channel can be delayed independently up to 10ms
ā€¢ Clipping detection and limiting circuits
ā€¢ Designed for non-ampliļ¬ed models
ā€¢ Easy behind the radio installation with pre-wired harness
ā€¢ Bass knob included for level control of subwoofer amp
ā€¢
Settings adjusted via Bluetooth
Ā®
in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
ā€¢ Read, write, and store conļ¬gurations for future recall
ā€¢ Password protect feature available in the mobile app
ā€¢ updatableUSB Micro B
INTERFACE COMPONENTS
ā€¢ AXDSPX-MI2 interface
ā€¢ AXDSPX-MI2 interface harness
ā€¢ AXDSPX-MI2 vehicle T-harness ā€¢ Bass knob
ā€¢ AXDSPX-MI2 display T-harness
APPLICATIONS
Visit axxessinterfaces.com for current application list.
2
Adding a subwoofer to a factory system:
The diagram on Page 3 shows the connections that need to be made to add a subwoofer to the
factory system.
Note: RCA jacks sold separately.)
Adding a full-range of amps and subwoofer to a factory system:
The diagram on Page 4 shows the connections that need to be made to add:
Subwoofer (RCA jacks sold separately)
Ampliļ¬er (SPDT relay E-123 required) or Additional Amp (RCA jacks sold separately).
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio. ā€ 
2. Install the AX-DSPX-MI2 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AX-DSPX-MI2 vehicle T-harness Plug the to the AX-DSPX-MI2 interface.
4. Plug the AX-DSPX-MI2 interface harness AX-DSPX-MI2 interface to the .
5. AX-DSP-XL Download and install the app from the Google Play Store Apple App Store or .
6. Bluetooth Connection Open the app then select the tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
7. Scroll to the tab then select the vehicle type. Press theConļ¬guration Lock Down ā€”
button to save the conļ¬guration. Refer to page 7 for more information.
8. Connect the amp turn-on wire.
9. Adjust the settings in the app as desired. Press the ā€” button to save any Lock Down
new conļ¬gurations.
ā€  For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and ļ¬nd instructions under Metra
Radio Install kits.
ā€” Anytime the interface is locked down the key must be cycled off then back on.
INSTALLATION OPTIONS INSTALLATION
3
REV. 12/7/21 INSTAXDSPX-MI2
SUB
Factory Radio Chassis
Factory Radio Harness
Interface
Any remaining wires
tape off and disregard
These outputs can be used for
additional sub amps, or for adding
onto the system at a later date
Vehicle T-Harness
Interface T-Harness
Bass Knob
Black - Chassis Ground
Orange - Control Wire
Blue/White - Amp Turn-On Wire
Keep Connected
Any remaining wires
tape off and disregard
RCA Jacks
(sold separately)
ADDING A SUB TO A FACTORY SYSTEM


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXDSPX-MI2

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXDSPX-MI2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AXESS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd