AXESS AXAMP-CH5 Handleiding

AXESS Niet gecategoriseerd AXAMP-CH5

Lees hieronder de 📖 handleiding in het Nederlandse voor AXESS AXAMP-CH5 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
AXAMP-CH5
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 12/17/24 INSTAXAMP-CH5
INTERFACE FEATURES
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
• Multimeter
TABLE OF CONTENTS
Installation & Installation Options 2 ........................
Adding Amp/Amps to a Factory System 3 .............
Rebooting the U-Connect Radio 4 ..........................
Troubleshooting.....................................................5
APPLICATIONS
Visit for current application listAxxessInterfaces.com
INTERFACE COMPONENTS
• AXAMP-CH5 Amplifier Integration interface
• AXAMP-CH5 interface harness
• AXAMP-CH5 vehicle T-harness
• Bass knob
• LD-DSP-RPAD2
Amplifier Integration Interface
Fits Chrysler Select Models
2014-2023
www.MetraOnline.com
MetraOnline.com may be used to assist
with dash assembly instructions. Simply
enter your Year, Make, Model vehicle
into the vehicle fit guide and look for the
Dash Kit Installation Instructions.
• Designed for both amplified and non-amplified vehicles
• Provides 6 channels of 5-volt RMS audio
• Channels 5 & 6 are non-fading full range output
• Includes plug-n-play harnessing
• Simple behind the radio installation
• Dual colored LED feedback
• Input Power handling 50 Watts per channel
• Amp on turn-on output is rated at 250mA
• 2 channel S/PDIF out (Fronts)
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this product.
Ensure that all installation connections, especially the air
bag indicator lights, are plugged in before reconnecting
the battery or cycling the ignition to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
2
Adding a subwoofer to a factory system:
This feature offers the ability to add a subwoofer to a factory system, whether amplified or non-
amplified (Refer to Page 3)
Adding a full-range amp and subwoofer to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system, whether
amplified* or non-amplified. (Refer to )Page 3
* For amplified models the amp must be bypassed/unplugged. Use either Axxess AXABH-CH2 or
AXABH-CH4 (sold separately) to bypass the amp for best results.
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio.*
2. AXAMP-CH5 vehicle T-harness Install the to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXAMP-CH5 vehicle T-harness AXAMP-CH5 interface Plug the to the .
4. AXAMP-CH5 interface harness AXAMP-CH5 interface Plug the to the .
5. Connect the amp turn-on wire.
6. Adjust your aftermarket amplifier to a desired listening level.
* For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
INSTALLATION OPTIONS INSTALLATION
3
REV. 12/17/24 INSTAXAMP-CH5
ADDING AMPLIFIER/AMPLIFIERS TO A FACTORY SYSTEM
Factory Radio
*BACK*
8-Pin
2-Pin
Connect if 2 Pin Amplified
LD-BASSKNOB
LD-BASSKNOB
20-Pin
LED
FRONT
REAR
SUB 2 PIN
20 PIN
TOSS
LINK
CHIME VOL
UPDATE
PORT
Interface
R
LD-PAW-CH5
LED
FRONT
REA R
SUB 2 PI N
20 PI N
TOS S
LIN K
CHI ME V OL
UPDAT E
PORT
Interface
2-Pin
30
86
85
87
To 12v
Constant
2-Pin
RCA Jacks
(sold separately)
Not Used
If connecting multiple amps, Metra recommends incorporating
an ( ). Metra SPDT Relay part #: SPDT Relay not included E-123
SPDT Relay
Blue/White - Amp Turn-On Wire
FL
FR
RR
RL
LD-PAW-EXT
1 of 2
LD-PAW-EXT
2 of 2
52-Pin
Factory Radio Harness
A
B
C
If system is connect to , then to the non-amplified, A B C
Resistor pad (LD-DSP-RPAD1 or LD-DSP-RPAD2). Otherwise, refer
to www.Metraonline.com for avaiable amplifier bypass harness
and connecters , and from LD-PAW-*** harnessdisreguard AB C .
* (Refer to rpad application)
LD-DSP-RPAD1 or LD-DSP-RPAD2
52-Pin

Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXAMP-CH5

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXAMP-CH5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd AXESS

AXESS

AXESS AXAMP-CH4 Handleiding

27 December 2024
AXESS

AXESS AX-LOC Handleiding

27 December 2024
AXESS

AXESS AXAMP-CH5 Handleiding

27 December 2024
AXESS

AXESS AXAMP-FD1 Handleiding

27 December 2024
AXESS

AXESS AXBUCS-MZ286V Handleiding

9 September 2024
AXESS

AXESS 99-7014HG Handleiding

29 Augustus 2024
AXESS

AXESS AXGM-17 Handleiding

29 Augustus 2024
AXESS

AXESS AXGMLN-34 Handleiding

29 Augustus 2024
AXESS

AXESS 99-7382HG Handleiding

29 Augustus 2024
AXESS

AXESS GMOS-12 Handleiding

29 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Atlona

Atlona AT-2VGA300SL Handleiding

28 December 2024
Atlona

Atlona AT-HD-V216 Handleiding

28 December 2024
Atlona

Atlona AT-VGA11S Handleiding

28 December 2024
Atlona

Atlona AT-HD-3GSDI Handleiding

28 December 2024
Adj

Adj EVS3 FLEX45 Handleiding

28 December 2024
Adj

Adj COB Cannon LP200X Handleiding

28 December 2024
Atlona

Atlona AT-DVI0808 Handleiding

28 December 2024
Atlona

Atlona AT-HDRX-ROADNET Handleiding

28 December 2024
Atlona

Atlona AT-HD14SS Handleiding

28 December 2024
Atlona

Atlona AT-PRO2HDREC Handleiding

28 December 2024