AXESS AXAMP-CH4 Handleiding

AXESS Niet gecategoriseerd AXAMP-CH4

Lees hieronder de 📖 handleiding in het Nederlandse voor AXESS AXAMP-CH4 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
AXAMP-CH4
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 12/17/24 INSTAXAMP-CH4
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
• Multimeter
TABLE OF CONTENTS
Installation & Installation Options 2 ........................
Adding Amp/Amps to a Factory System 3 .............
Troubleshooting.....................................................4
APPLICATIONS
Visit for current application listAxxessInterfaces.com
INTERFACE COMPONENTS
• AXAMP-CH4 interface
• AXAMP-CH4 interface harness
• AXAMP-CH4 vehicle T-harness
• Bass knob
Fits Chrysler Amplifier Integration Interface
2007-2020
www.MetraOnline.com
MetraOnline.com may be used to assist
with dash assembly instructions. Simply
enter your Year, Make, Model vehicle
into the vehicle fit guide and look for the
Dash Kit Installation Instructions.
INTERFACE FEATURES
• Designed for both amplified and non-amplified models
• Provides 6 channels of 5-volt RMS audio
• Channels 5 & 6 are non-fading full range output
• Includes plug-n-play harnessing
• Simple behind the radio installation
• Dual colored LED feedback
• Input voltage 50 watts per channel
• Amp on turn-on output is rated at 250mA
• 2 channel S/PDIF out (Fronts)
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal before
installing this product. Ensure that all installation
connections, especially the air bag indicator lights, are
plugged in before reconnecting the battery or cycling
the ignition to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
2
Adding a subwoofer to a factory system:
This feature offers the ability to add a subwoofer to a factory system, whether amplified or non-
amplified (Refer to Page 3)
Adding a full-range amp and subwoofer to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system, whether
amplified*or non-amplified. (Refer to )Page 3
* For amplified models the amp must be bypassed/unplugged. Use either Axxess AXABH-CH2 or
AXABH-CH4 (sold separately) to bypass the amp for best results.
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio.*
2. AXAMP-CH4 vehicle T-harness Install the to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXAMP-CH4 vehicle T-harness AXAMP-CH4 interface Plug the to the .
4. AXAMP-CH4 interface harness AXAMP-CH4 interface Plug the to the .
5. Connect the amp turn-on wire.
6. Adjust your aftermarket amplifier to a desired listening level.
* For dash disassembly instructions, refer to . Enter the year, make,
metraonline.com
and model of the vehicle in the and find instructions under Metra Vehicle Fit Guide
Radio Install kits.
INSTALLATION OPTIONS INSTALLATION
3
REV. 12/17/24 INSTAXAMP-CH8
ADDING AMPLIFIER/AMPLIFIERS TO A FACTORY SYSTEM
A
2-Pin
Connect if 2 Pin Amplified
LD-BASSKNOB
LD-BASSKNOB
20-Pin
LED
FRONT
REAR
SUB 2 PIN
20 PIN
TOSS
LINK
CHIME VOL
UPDATE
PORT
Interface
R
LD-PAW-CH4
LED
FRONT
REAR
SUB 2 PIN
20 PIN
TOSS
LINK
CHIME VOL
UPDATE
PORT
Interface
2-Pin
30
86
85
87
To 12v
Constant
2-Pin
RCA Jacks
(sold separately)
Not Used
If connecting multiple amps, Metra recommends incorporating
an ( ). Metra SPDT Relay part #: SPDT Relay not included E-123
SPDT Relay
If system is connect to non-amplified, A . B
Otherwise, refer to www.Metraonline.com
for available amplifier bypass harness
and connecters.disreguard
8-Pin
Blue/White - Amp Turn-On Wire
FL
FR
RR
RL
LD-PAW-EXT
1 of 2
LD-PAW-EXT
2 of 2
B
C
Factory Radio
*BACK*
22-Pin
Factory Radio Harness
22-Pin

Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXAMP-CH4

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXAMP-CH4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd AXESS

AXESS

AXESS AXAMP-CH4 Handleiding

27 December 2024
AXESS

AXESS AX-LOC Handleiding

27 December 2024
AXESS

AXESS AXAMP-CH5 Handleiding

27 December 2024
AXESS

AXESS AXAMP-FD1 Handleiding

27 December 2024
AXESS

AXESS AXBUCS-MZ286V Handleiding

9 September 2024
AXESS

AXESS 99-7014HG Handleiding

29 Augustus 2024
AXESS

AXESS AXGM-17 Handleiding

29 Augustus 2024
AXESS

AXESS AXGMLN-34 Handleiding

29 Augustus 2024
AXESS

AXESS 99-7382HG Handleiding

29 Augustus 2024
AXESS

AXESS GMOS-12 Handleiding

29 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Burg-Wachter

Burg-Wachter ENTRY 7712 Keypad FP Handleiding

28 December 2024
HP

HP Engage Flex Pro-C G2 Handleiding

27 December 2024
Victrola

Victrola The Empire VTA-270B Handleiding

27 December 2024
Total Chef

Total Chef TCMO-07-SS Handleiding

27 December 2024
ADATA

ADATA STARKER AIR BTF Handleiding

27 December 2024
HP

HP Engage Flex Pro G2 Handleiding

27 December 2024
HP

HP Voyager Legend 50 Handleiding

27 December 2024
Kospel

Kospel SV-1000.1 Handleiding

27 December 2024
MEE Audio

MEE Audio BTX2 Handleiding

27 December 2024
Speco Technologies

Speco Technologies SB11M Handleiding

27 December 2024