AXESS ANC-GMH1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor AXESS ANC-GMH1 (14 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
ANC-GMH1
ANC T-Harness Installation
LOC T-Harnesses have vehicle specific applications. Please visit https://axxessinterfaces.com/ for the latest and up- -to
date application information.
Active noise cancellation is an OE module that helps reduce unwanted background noise. Microphones mounted throughout the
vehicles are used to monitor sound levels and frequencies inside the vehicle’s cabin. The factory ANC generates an inverted signal from
the factory speakers to cancel out unwanted cabin noise.
It is recommended that the RPO code is double check to confirm application. The RPO Codes can be found on a placard labeled “Service
Parts Identification” in the glove box, on the trunk floor or inside the driver's door panel.
Things to know
UQA
Date 9- -13 23 INSTANC-GMH1
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other than the location mentioned below.
The Active Noise Cancellation system is operational under the following conditions:
The amplifier has passed all self diagnostic checks
All doors are closed
Battery voltage is between 9.5 V and 16 V
The vehicle cabin temperature is less than 140°F (60°C)
Engine speed is between 550 and 3000 RPM
To bypass the ANC you would need to remove the
trunk carpet or liner and look for a small module
connected to the vehicle's audio system or wiring
harness. However, please note that the exact
location may vary depending on the specific trim
level and options of the Camaro. Simply unplug
the OE connector form the AMP/ANC module and
plug the t-harness inline. Your ANCs have been
bypassed.
2016-2022 CAMARO
ANC Plug Location
RPO Codes: UQ3+NKC, UQA
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other than the location mentioned below.
The ANC system operates when certain conditions are met:
The amplifier passes self-diagnostic checks.
All doors are closed.
Battery voltage is between 9.5 V and 16 V.
Cabin temperature is below 14F (60°C).
Engine speed is between 550 and 3000 RPM.
2018-2022 MALIBU, 2017-2020 IMPALA
To bypass the ANC you would need to remove
the trunk carpet and rear passenger panel look
for a small module connected to the vehicle's
audio system or wiring harness. However, please
note that the exact location may vary depending
on the specific trim level and options of the
Malibu. Simply unplug the OE connector form
the AMP/ANC module and plug the t-harness
inline. Your ANCs have been bypassed.
ANC Plug Location
RPO Codes: UQ3, UQA, UQF, , , UQG UQS NKC


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: ANC-GMH1

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS ANC-GMH1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AXESS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd