AXESS 99-5849CH Handleiding

AXESS Niet gecategoriseerd 99-5849CH

Lees hieronder de 📖 handleiding in het Nederlandse voor AXESS 99-5849CH (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

I N S TA L L AT I O N I N S T R U C T I O N S

99-5849CH

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product.

Ensure that all installation connections,

especially the air bag indicator lights, are

plugged in before reconnecting the battery

or cycling the ignition to test this product.

NOTE: Refer also to the instructions

included with the aftermarket radio.

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Heated seat buttons (L & R) Blank panels • E) #8 x 3/8” Phillips screws

(4)

• F) Panel clips (6)

• G) HVAC interface and wiring harness (not shown) • H) Antenna adapter (not shown)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 9/32” Socket wrench • Cutting tool

TABLE OF CONTENTS

Dash Disassembly 2-3 ..............................................

Kit Preparation 4 .......................................................

Kit Assembly

– ISO DIN radio provision with pocket 5 .................

– ISO DDIN radio provision 5 ...................................

Axxess Interface Installation 6-10 ...........................

Final Assembly 11 ......................................................

Configuration 12-14 ...................................................

WIRING & ANTENNA CONNECTIONS

Wiring Harness: Axxess interface built into kit

Antenna Adapter: Included with kit

USB Replacement Hubs: #AXFD-USB or

#AXFD-USB2 (sold separately)

Ford F150 2015-2020*

F250/350/450/550 XL 2020-2022*

Visit for more detailed information about

MetraOnline.com

the product and up-to-date vehicle specific applications

* Models equipped

with 4.2-inch color

screen and single

zone climate controls

A B C D

KIT FEATURES

• ISO DIN radio provision with pocket • ISO DDIN radio provision

• Integrated passenger airbag indicator • Painted charcoal

• Included interface for climate and steering wheel functions

Note: This kit will not support the Pro Trailer Backup Assist™ feature, nor the

massaging seats.

Note: Factory B&O amplified sound systems require an additional interface,

sold separately. Part # AXA2B-FD1.

2386.257.1187

MetraOnline.com

DASH DISASSEMBLY

1. For vehicles with a center channel

speaker: Unclip and remove the speaker

grille in the center of the dash above the

radio/climate control panel, and then

remove the (2) 9/32” screws exposed.

(Figure A)

2. For vehicles without a center channel

speaker: Remove the rubber pad in the

shallow pocket above the radio/climate

control panel, and then remove the (2)

9/32” screws exposed. (Figure B)

3. Unclip and remove the panel above the

radio/climate control panel, and then

remove the (2) 9/32” screws from the

top of the radio/climate control panel.

(Figure C)

Ensure that the vehicle is completely off before

proceeding onto the following (5) steps

4. Using the panel removal tool, carefully

unclip, unplug, and remove the radio/

climate control panel.

5. Remove the 9/32” Phillips screws securing

the display screen:

(4) for the 4.2-inch display screen models,

(6) for 8-inch display screen models, then

unplug and remove the screen. (Figure D)

Continued on the next page

(Figure D)

(Figure C)

(Figure A)

(Figure B)

REV. 9/12/23 INST99-5849CH

DASH DISASSEMBLY (CONT.)

(Figure G)

(Figure H)

(Figure F)

6. For models with a 4.2-inch display

screen and SYNC®: Remove (2) 9/32”

screws securing the SYNC® module, then

unplug and remove. (Figure F)

7. Remove (4) 9/32” screws securing the

radio chassis, disconnect the wiring, and

then remove the factory radio. (Figure G)

8. For models equipped with a factory

backup camera: Remove the (2) 10mm

nuts located at the top of the camera

module. Loosen the bottom nut and

reposition the module down onto the

lower stud, then re-secure using just (1)

10mm nut. (Figure H)

Continue to Kit Preparation

Product specificaties

Merk:	AXESS
Categorie:	Niet gecategoriseerd
Model:	99-5849CH

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS 99-5849CH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd AXESS

AXESS AXBUCS-MZ286V Handleiding

9 September 2024

AXESS 99-7014HG Handleiding

29 Augustus 2024

AXESS AXGM-17 Handleiding

29 Augustus 2024

AXESS AXGMLN-34 Handleiding

29 Augustus 2024

AXESS 99-7382HG Handleiding

29 Augustus 2024

AXESS GMOS-12 Handleiding

29 Augustus 2024

AXESS XSVI-1788-NAV Handleiding

29 Augustus 2024

AXESS 99-7510HG Handleiding

29 Augustus 2024

AXESS AXBUCS-NI246V Handleiding

29 Augustus 2024

AXESS 99-3307G Handleiding

29 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx 03863 Handleiding

24 December 2024

Vello PGS-P Handleiding

24 December 2024

Venom Quad Charging Station VS4796 Handleiding

24 December 2024

Nec IPJ2000CM Handleiding

24 December 2024

Monogram ZKPN Handleiding

24 December 2024

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024