AVTech KPC136ALT Handleiding

AVTech Bewakingscamera KPC136ALT

Lees hieronder de 📖 handleiding in het Nederlandse voor AVTech KPC136ALT (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 101 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

424Z

k136elt_dlt_alt_V1.2

USER MANUAL

IR Camera Series

The product image may differ from the actual product.

Please read the instructions thoroughly before using the product.

FEATURES

1. High sensitivity in the dark environment, 0.05 Lux / F2.0, 0Lux (IR ON) (Selected Models Only)

2. Day and night features for 24-hour surveillance

3. Excellent image quality

4. IR LED effective range reaches up to 15 meters

5. IP67 standard approved outdoor housing

PACKAGE CONTENT

 IR camera with a power and video cable * 1

 Bracket * 1

 Accessory pack x 1

 User Manual * 1

SPECIFICATIONS*

Pick up Element 1/3" H.R. Color CCD

image sensor 1/3" Color CCD image sensor

Number of Pixel

771(H) x 492(V)

<NTSC> / 753(H) x

582(V) <PAL>

512(H) x 492(V) <NTSC> / 512(H) x 582(V)

<PAL>

Resolution 520 TV Lines Standard

Min. Illumination 0.1 Lux / F2.0,

0Lux (IR ON) 0.05 Lux / F2.0, 0Lux (IR ON)

IR LED 21 units 14 units

Effective Range Up to 15 Meters

S/N Ratio More than 48dB (AGC OFF)

Electronic Shutter 1/60 (1/50) to 1/100,000 sec.

Lens f3.6mm /

F2.0

f6.0mm /

F2.0 f3.6mm / F2.0

Lens Angle 92.6° 54° 92.6°

IRIS Mode AES

White Balance ATW

IP Rating IP67

Video Output 1.0 Vp-p composite, 75Ω

Operating Temperature -20˚C ~ 40˚C

Power Source (±10%) DC12V

Current Consumption (±10%) 70mA (IR OFF), 270mA (IR ON) 70mA (IR OFF),

200mA (IR ON)

Dimensions (mm)** 60(Φ) x 90.13(L)

* The specifications are subject to change without notice.

** Dimensional Tolerance: ± 5mm

INSTALLATIONS

1. Use the supplied three screws to attach the bracket to wall. Drill a hole in advance on the proper position of the

wall for the Power and Video Cable to pass through later.

2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then, screw the Joint Lock to the

backside of the camera (turn clockwise)*.

NOTE: There are two screw holes on the backside of the camera. Please choose the proper one which

best suits your installation environment. If the upper screw hole is chosen, it’s recommended to

push the Sun Shield a little bit toward the direction of the lens for easy installation.

3. Screw the camera with the Joint Lock connected to the bracket. Adjust the camera angle and the Sun Shield

position. After that, secure the Joint Lock to fix. Then, pass the Power and Video Cable through the hole drilled

in Step 1 to hide it.

Figure 1 Figure 2 Figure 3

CONNECTION

1. DC12V Input Terminal

Connect the power terminal of the camera to a 12V DC regulated power supply.

NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance

of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.

2. Video Output Connector (VIDEO OUT)

Connect the camera video output and the monitor video input with 75Ω coaxial cable.

NOTE: To ensure the camera has sufficient protection against moisture, an extra waterproof measure,

such as by using an insulating tape, must be used to cover the power and video connectors after

connection.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ROHS Announcement

All lead-free products offered by the company comply with the requirements of the European law on the Restriction

of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly

“lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected

separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do

not dispose of these products as unsorted municipal waste.

CE Mark

This apparatus is manufactured to comply with the radio interference.

The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or

remove any content in this manual at any time.

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of such

damages.

CCAAUUTTIIOONN

Product specificaties

Merk:	AVTech
Categorie:	Bewakingscamera
Model:	KPC136ALT
Kleur van het product:	Zwart
Gewicht:	240 g
Diepte:	116.13 mm
Hoogte:	79.58 mm
Soort:	CCTV-bewakingscamera
Internationale veiligheidscode (IP):	IP67
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond
Maximum resolutie:	- Pixels
Diameter:	60 mm
Stroomuitvoer (volt):	-12V
Stroomuitvoer (ampère):	0.2 A
Minimale belichting:	0 Lux
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
Vaste focale lengte:	2 mm
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Type beeldsensor:	CCD
Optische zoom:	- x
Camera sluitertijd:	1/60 - 1/100000 s
Type camerasluiter:	Elektronisch
Signaal/ruis-verhouding:	48 dB
Power over Ethernet (PoE):	Nee
Nachtkijker afstand:	15 m
Aantal verlichtingen LEDS:	14
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-5 - 40 °C
NTSC resoluties:	512 x 492 Pixels
PAL resoluties:	512 x 582 Pixels