AVer M15W Handleiding

AVer Niet gecategoriseerd M15W

Lees hieronder de 📖 handleiding in het Nederlandse voor AVer M15W (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5



M15W Instruction Manual

PACKAGE CONTENTS

The items below are included with this product. If any item is

missing, contact the dealer from whom you purchased this product.

M15W unit Power adapter/

Power plug USB cable

Instruction manual Wi-Fi Dongle

OPTIONAL ACCESSORIES 



Carrying Bag Anti-glare Sheet

MORE HELP

For FAQs, technical support, software and instruction manual

download, please visit:

https://www.averusa.com/education/support/

HARDWARE PARTS

5 6 7 8



1. Camera head 2. LED lighting

3. Arm 4. Control panel

5. Wi-Fi dongle 6. USB port

7. HDMI output 8. DC power jack

CONTROL PANEL

4 6 8

5 7 9



1. Power indicator

2. Wi-Fi indicator

3. Battery indicator

4. Power button

(on/off/standby)

5. Freeze

6. Lamp(on/off)

7. Auto focus

8. Zoom in

9. Zoom out

10. Built-in MIC

LED INDICATOR

Power Solid green: Power on

No light: Power off

Solid red: Standby mode

Wi-Fi Solid blue: AP Mode Ready / STA connected

Slow flashing blue: Software connection

with camera

Short flashing blue: Create AP mode / STA

connecting

Solid green: Miracast mode ready

Slow flashing green: Miracast streaming

start

Quick flashing green: Miracast device scan /

connecting

Battery

Solid green(x3): Battery is full(100% ~ 60%)

Solid green(x2): Battery is 60% ~ 30%

Solid green(x1): Battery is 30% ~ 5%

Solid red (x1): Battery is 5% ~ 0%

Flashing red (x1): Battery is out of power

Solid orange(x3): Battery is abnormal

[Note]

1. The battery will be exhausted for long-term usage. Do not

replace the battery by yourself. Please contact your dealer.

2. To complete turn off camera,

press and long press the power

button.

COMPOUND KEY

Snapshot the current

screen image to software

or cloud.



P/N: 300APW00-???

COMPOUND KEY (Cont.) 

Back to factory default settings.

Press to switch between following modes:

- Auto detects the best resolution(4K, 720P, 1080P)

- 1024x768 (If HDMI device support)

- 4K 60Hz (If HDMI device support)

Press to switch between following modes:

- Normal: Adjust the gradient of image.

- Motion: Increase frame rate.

Sufficient lighting is required

when using this mode.

- High quality: Better image quality.



DEVICE CONNECTION



P2P connection via Wi-Fi Dongle



Connect M15W to laptop and HDMI display.



[Note]

 The Wi-Fi mode is on when the camera is powered up.

 When camera connects to a laptop through the USB port,

the Wi-Fi mode is disabled. Please follow the direction on

HDMI device.

Plug in power adapter and turn on M15W.

 

[Note]

 Please fully charge the camera for the first time use.

 When the camera is power on, the camera is in “Standby”

mode. In standby mode, it can be charging with the USB

connection between other devices; but the power supply is

required 5V2A and the charging time will be longer.

 The laptop, projector, or monitor provide the power cannot

through the USB connection to the camera while the camera

is operating.

 When the camera is charging with the wall outlet, the battery

indicator is in green flashing.

 Press + when the camera doesn't work

properly. The camera back to standby mode.



1 Plug-in the WiFi dongle to PC/laptop and Install the

AVerTouch application.

AVerTouch

Wi-Fi Dongle Laptop



2 Open AVerTouch application, click to

connect the camera.

[Note] Check serial number at bottom of the camera to

find your camera.

3 Click Next to continue.



4 Entering the Camera Name and Passcode, click Done

to continue.



5 Click Done button to connect camera.



[Note] It takes about 60 seconds to complete connection.

6 Select X can exit the live view page.



[Note] When connecting is successful, you should see

the live view of the camera.

Wi-Fi Connection

MIRACAST CONNECTION

Select to make a connection with camera.



1 Power on the camera.

Check the Wi-Fi status – Blue light on.



2 Open AVerTouch and follow on-screen instruction to

enable Wi-Fi function on camera.

[Note]

 The software will auto detect the camera on your

network.

 Select the camera that you want to connect with it.

 The camera name will be “AVer ‘model name’ - WiFi

dongle Mac address”. The Mac address will be different

from the device.

Select to switch to camera live screen.



2 Select Wireless > Mode > Miracast to enable Miracast

mode.

3 Select Miracast > display device.

[Note]

 The detected display devices will be list out.

 Press back to the menu.

 The camera image will display on the display device’s

screen after connecting.



1 Press to enter selection menu.

[Note]

 Using and button to go to the selection

and press button to confirm the selection.

 Make sure M15W and display device (such as an

Interactive flat panel) are on same Wi-Fi network and

Wi-Fi is connected.

 A commercial Miracast Dongle (Wireless Adapter) is

required for the display device.



Product specificaties

Merk:	AVer
Categorie:	Niet gecategoriseerd
Model:	M15W
Kleur van het product:	Grey, White
Gewicht:	680 g
Breedte:	518 mm
Diepte:	84 mm
Hoogte:	351 mm
Stroom:	2 A
Montagewijze:	Standaard
Type stroombron:	AC, DC
Meegeleverde kabels:	USB
Maximale beeldsnelheid:	60 fps
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Aantal USB 2.0-poorten:	1
Aantal HDMI-poorten:	1
DC voltage input:	5 V
Omvang optische sensor:	1/3.06 "
Megapixels:	13 MP
Type beeldsensor:	CMOS
Digitale zoom:	23 x
Maximale videoresolutie:	3840 x 2160 Pixels
HD type:	4K Ultra HD
Ingebouwde microfoon:	Ja
Plug and play:	Ja
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Ondersteunt Windows:	Windows 10, Windows 7
Scherpstellen:	Automatisch/handmatig
PTZ control:	Ja
Mini-USB ports hoeveelheid:	1
Wifi:	Ja
Stroomverbruik (typisch):	4 W
Code geharmoniseerd systeem (HS):	85258900