Avantco BMFW3 Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Avantco BMFW3 (5 pagina's) in de categorie Warmhoudplaat. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
08/2019
Please note this unit must be installed by a quali๎œฎed person!
Unpacking:
1. Remove the bain marie and opera๎žŸon manual from the packaging.
2. Remove all packaging materials and protec๎žŸve coverings, including the protec๎žŸve plas๎žŸc coa๎žŸng
on all stainless steel, from the bain marie.
3. Wipe all surfaces with a clean, sani๎žŸzed cloth.
4. Check unit for damage. Immediately no๎žŸfy your dealer if the bain marie is damaged.
Installa๎žŸon:
1. Remove all components from shipping container. (Fig. 1)
2. Using the screws secure the right & le๎Œ parts on the tank body. (Fig. 2)
3. Put one piece of glass into the hook of the right & le๎Œ parts. (Fig. 3)
4. Put the 2 long poles into the holes of the right & le๎Œ parts. And put another piece of glass
between the long poles and the right & le๎Œ parts. Secure the 4 screws. (Fig. 4)
5. Bain marie is ready for use. (Fig. 5)
Fig. Fig. Fig. 1 2 3
Fig. Fig. 4 5
The unit must be connected to a power point with compa๎žŸble power ra๎žŸng.
1. The unit is equipped with a hea๎žŸng element. Add adequate water inside the tank.
2. Rota๎žŸng the thermostat knob. Do not use the bain marie un๎žŸl the pre-heat cycle has elapsed
as you will not achieve op๎žŸmum product holding capabili๎žŸes.
3. Place the cooked or heated product into gastronorm food pans and place into
bain marie tank.
4. Cover the pans with correct gastronorm lids to suit.
5. Keep close a๎žฉen๎žŸon to the temperature of the food product. If the product is too hot it will
out and if the product is too cold it will deteriorate.
6. Dial thermostat models - adjust the thermostat by rota๎žŸng the dial to desired temperature.
To maintain appearance and increase the service life, the bain marie should be cleaned
at least daily.
1. Before cleaning or moving, unplug the unit and let it cool completely.
2. Carefully empty the water from the well.
3. Wipe the en๎žŸre well interior with a clean, damp cloth.
4. To avoid damaging the well ๎œฎnish, do not use abrasive materials, scratching cleansers or
scouring pads to clean water deposits from well.
5. If soap or chemical cleansers are used, be sure they are completely rinsed away with clear
water, immediately a๎Œer cleansing. Chemical residue could damage warmer.
6. Every two hours, remove pan and check the water level.
DO NOT IMMERSE BAIN MARIE IN WATER OR OTHER LIQUID.
DO NOT SPRAY WITH WATER OR CLEANING PRODUCT. LIQUID COULD ENTER THE
ELECTRICAL COMPARTMENT AND CAUSE A SHORT CIRCUIT OR ELECTRIC SHOCK.
!


Product specificaties

Merk: Avantco
Categorie: Warmhoudplaat
Model: BMFW3

Heb je hulp nodig?

Als je hulp nodig hebt met Avantco BMFW3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Warmhoudplaat Avantco

Handleiding Warmhoudplaat

Nieuwste handleidingen voor Warmhoudplaat