Autel MaxiLink ML301 Handleiding

Autel Niet gecategoriseerd MaxiLink ML301

Lees hieronder de 📖 handleiding in het Nederlandse voor Autel MaxiLink ML301 (116 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/116
i
Trademarks
Autel® , MaxiSys® , MaxiDAS® , MaxiScan® , MaxiRecorder® , MaxiTPMS® , and
MaxiCheck® are trademarks of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specications and illustrations in this manual are based on the
latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specications, functions, and
illustrations.
Autel will not be liable for any direct damages or for any special, incidental, or
indirect damages or for any economic consequential damages (including lost
prots).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support:
http://pro.autel.com
www.autel.com
1- -855 288-3587/1-855-AUTELUS (North America)
0086-755-8614 7779 (China)
support@autel.com
For details, please refer to the Service and Support section in this manual.
ii
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the scan tool, read
this instruction manual rst and observe the following safety precautions at
a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create
hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and make sure the parking brake
is engaged.
Keep a re extinguisher suitable for gasoline/chemical/ electrical res
nearby.
Don’t connect or disconnect any test equipment while the ignition is on
or the engine is running.
Keep the scan tool dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the scan tool, when
necessary.
iii
CONTENTS
1 GENERAL INFORMATION ..................................................................... 1
O -B DN OARD IAGNOSTICS (OBD) II .............................................................. 1
D T C (DTC ) IAGNOSTIC ROUBLE ODES S ......................................................... 1
LOCATION OF THE ATA INK ONNECTOR D L C (DLC) .......................................... 2
OBD R II EADINESS ONITORSM .................................................................... 3
OBD M R II ONITOR EADINESS TATUSS .......................................................... 4
OBD D 4 II EFINITIONS ..................................................................................
2 USING THE SCAN TOOL ....................................................................... 6
T D 6OOL ESCRIPTION ...................................................................................
SPECIFICATIONS ........................................................................................ 6
P FRODUCT EATURES.................................................................................. 7
VEHICLE OVERAGEC .................................................................................. 7
3 OPERATING INSTRUCTIONS ................................................................ 9
READ ODESC ............................................................................................ 9
E C RASE ODES ........................................................................................ 11
RETRIEVE I/M DINESS TATUSREA S ............................................................. 12
VIEW UMBERVIN N .................................................................................. 14
RESCAN ATAD ......................................................................................... 14
4 WARRANTY AND SERVICE ................................................................. 15
LIMITED NE EAR O Y W ARRANTY ................................................................. 15
SERVICE AND UPPORTS ............................................................................ 16
5 DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS ........................... 17


Product specificaties

Merk: Autel
Categorie: Niet gecategoriseerd
Model: MaxiLink ML301

Heb je hulp nodig?

Als je hulp nodig hebt met Autel MaxiLink ML301 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Autel

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd