Austrian Audio Hi-X25BT Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Austrian Audio Hi-X25BT (8 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Hi- Professional Wireless Bluetooth® Over- X25BT Ear Headphones
Owner’s Manual
Introduction and Safety I nstructions
The Hi- X25BT headphones require a Bluetooth®- compatible
device (e.g., personal computer, mobile phone etc.) to be
used in wireless mode. Using the included USB- -C® to USB C®
cable, you can also listen in digital audio mode and, using the
jack cable you can even listen in analogue audio mode. ,
Please read and follow the instructions in this manual before
using this product.
• Please do not operate t for its his product other than
intended use. Austrian Audio cannot accept any
liability for damages resulting from improper handling or misuse.
• Listening to personal stereo equipment at full volume for long periods can damage the user’s
hearing.
• Do not use if the product is defective.
• Always keep and operate the product in a dry and safe place.
• The product contains a lithium-polymer battery. Don’t expose it to excessive heat (do not
leave it in your car parked in the sun, do not throw it into fire and do not put it into the
microwave).
• Do not operate outside the intended operating temperature range: 0 °C to 45 °C (32 °F to
113 °F).
• Do not charge the product if it is too warm or too cold. Let it cool down or warm up to
approximately 20 °C to 30 °C (68 °F to 86 °F) before charging. Do not leave the product
unattended when plugged into the power source.
• Do not use this product in a wet or humid environment.
• Do not drop.
• The built- - in High Excursion drivers contain magnets.
• Please keep this product away from small children and persons who are not able to operate
professional audio equipment.
• If you need to clean the product, do this only with a soft dry cloth.
• Please do not use any third- . party accessories unless otherwise stated
• Do not disassemble the product, as there are no user-serviceable parts inside.
• Do not remove the sticker.
Thank you for reading the instructions and thank you very much for putting your trust in Austrian
Audio.
Operating the Hi- X25BT:
Power on/off
Press the on/off button on the bottom of the right earc p for 2 seconds until your u
Hi-X25BT welcomes you with a friendly “Power On” and the blue LED starts
blinking. If there is still an active connection, it will then automatically connect to
your by previously connected device and will confirm this indicating “Connected”
and the LED will change to glow continuously in blue.
To turn your headphones off, please press the on/off button for 3 seconds until your
Hi-X25BT turns off by indicating “Power Off” and the blue LED goes out.
Establish the Bluetooth®-connection
To establish a (new) connection, your headphones need to be turned off. Now
press the on/off button and continue pressing for 5 seconds. Your headphones
will turn on and automatically switch to the connecting mode, confirmed by
“Pairing” and a rapidly blinking blue LED.
Note: automaticallyIf you turn on your headphones for the first time, they will
switch to the pairing mode.
Note: If your headphones cannot find a connection to your connecting device (e.g., be
Bluetooth® is deactivated on your device), your headphones will turn off automaticall
some time.
Charging and istening to audio in digital audio model
Please use the included USB cable to charge your headphones. The
Bluetooth® , -connection will remain and you can continue using the Hi X25BT
while charging via USB cable.
If your Hi-X25BT is plugged in to a notebook for example, you can continue
to -listen to music via the plugged in USB cable while your headphones are
charging. To let your Hi-X25BT know that you want to switch from Bluetooth®
mode to digital audio mode, please press the on/off button briefly.
Note: Please note that the microphone is not available in USB digital audio mode.
If you want to change back from digital audio mode to Bluetooth® mode, simply press the
on/off button briefly again.
Listening to analogue audio mode
The analogue mode functions without using the battery, that’s why your
Hi-X25BT will turn off automatically when plugg the analogue jack ed into
cable. Now you need a device (e.g., a smartphone) that features a jack
output. To connect your Hi-X25BT to professional audio gear, you will also
find a 3.5 to 6.3 mm (1/8” to 1/4”) adapter enclosed.
Note: When in analogue audio mode the touch control functions on your
right ea are deactivated. You might notice considerable differences in volume between rcup
Bluetooth® and analogue audio mode.
Touch control functions
Your Hi-X25BT features capacitive controls on the right earcup to control the most popular
Bluetooth® functions.
• To turn the volume up, slide upwards on the guide groove.
• If you leave your finger on the sensor after sliding upwards,
- your Hi X25BT will continue turning up the volume until you
, release the groove or you have reached the maximum
volume level.
• To turn the volume down, slide downwards on the guide
groove.
• If you leave your finger on -the sensor after sliding downwards, your Hi X25BT will
continue turning down the volume until you release the groove or you have reached ,
the minimum volume level.
• If you want to start your voice assistant (if available and
® activated on your Bluetooth source), simultaneously
p lace multiple fingers on the control pad for more than
3 seconds.


Product specificaties

Merk: Austrian Audio
Categorie: Hoofdtelefoon
Model: Hi-X25BT

Heb je hulp nodig?

Als je hulp nodig hebt met Austrian Audio Hi-X25BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hoofdtelefoon Austrian Audio

Handleiding Hoofdtelefoon

Nieuwste handleidingen voor Hoofdtelefoon