Aurora LM4221H Handleiding

Aurora Lamineersysteem LM4221H

Lees hieronder de 📖 handleiding in het Nederlandse voor Aurora LM4221H (2 pagina's) in de categorie Lamineersysteem. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

INTRODUCTION

Congratulations on the purchase of your laminator. Now you

can protect your favourite documents up to size such as A4

photographs, certiﬁcates, ID cards, letters etc. in a water

resistant, airtight seal. Follow the instructions for proper use

and keep this manual for future reference.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be observed including the following:

1. Read all instructions.

2. Do not touch hot surfaces.

3. To protect against risk of electrical hazards, do not

immerse cord, plugs the appliance in water or other or

liquid.

4. Close supervision is necessary when the appliance is used

near children.

5. Unplug from the outlet when not in use and before

cleaning. Allow to cool before cleaning the appliance.

6. Do not operate any appliance with a damaged cord or plug

or after the appliance malfunctions, or has been damaged

in any manner.

7. Do not use outdoors.

8. Do not use the appliance for anything other than the

intended use.

9. Ensure the laminator is turned off when you have ﬁnished

laminating.

10. The mains socket sh ld be near the equipment and be ou

easily accessible.

11. Do not laminate sheets containing metal or conductive

materials.

12. If you are laminating a small or irregular shape, please

insert a 2cm/3cm strip of paper against the closed end of

the pouch as shown in the diagram, to prevent jamming.

A short power cord may be provided with this appliance to

reduce hazards resulting from becoming entangled in or

tripping over a longer cord. Extension cords may be used if care

is exercised in their use. If an extension cord is used, the

following must apply:

a. The marked electrical rating should be at least as great as the

electrical rating of the appliance.

b. The extension cord should not drop over the counter top or

tabletop where it can be pulled on by children or tripped over

accidentally.

PART NAME

NOTES

 We do not recommend laminating any type of

self-developing photo.

 Any photo to be laminated must be dry before processing.

 Do not laminate any documents that appear thick or heavy,

as this will get stuck in the laminator (with the thickness

thicker than 0.4mm).

 Very thin paper inserted into very thin pouch may cause a

twists and jam the laminator.

 In order to avoid creasing, please DO NOT insert the open

side of the ﬁlm into the laminator first.

 When the ﬁlm exits after being laminated, it may be very

hot and soft . Handle the newly laminated item with care.

Pressing the item with a book or other heavy objects may

help.

 This product bonds the laminate sleeve to the item being

processed .It is a permanent seal and cannot be removed.

 We do not recommend laminating any collector’s items of

value or any item you may wish to remove at a later date.

Do not attempt to laminate coins or thicker items .

HOW TO USE

1. Insert the mains plug into an electric socket and slide the

power switch to the left or right based on the pouch you

use. The POWER indicator will light up.

2. Wait 4-6 minutes for the machine to warm up. Once it has

reached laminating temperature, the READY indicator will

light up.

3. Place the item to be laminated into the laminating pouch,

and centre it within the pouch. Please ensure that your

document or picture is positioned as close to the sealed

edge as possible ensuring there is a margin of 3-9 left mm

between the item to be laminated and the edge of the

pouch.

 The laminator can laminate ﬁlm between the

thicknesses of 80-150microns.

 The laminator works with most types of heat-sealing

laminating pouches.

4. Insert the sealed edge of the laminating pouch directly into

the laminator opening until it is caught and drawn in (no

carrier is required), take care to ensure that the document is

straight and centrally positioned.

5. Remove the pouch from the rear of the machine after it has

stopped moving.

ROLLER RELEASE BUTTON

1. If a pouch jams in the laminator, slide the power switch to

oﬀ, switch oﬀ and remove the mains plug.

2. Press the roller release button on the back of the laminator

and gently pull the pouch out of the entry slot.

3. Do not insert tools or other objects into the entry slot as this

may damage the rollers.

MAINTENANCE

 Do not operate the laminator more than 2 hours at a time.

Wait at least 15 seconds between every laminating items.

Allow the laminator to cool at least 30 minutes after

turning oﬀ.

 Do not touch or place anything on hot the surfaces, wait

for the unit to cool before moving or cleaning.

CARE AND CLEANING

To reduce the risk of ﬁre or electrical shock, do not open the

unit. No user serviceable parts are insid e.

 Keep your hands and the cord away from hot parts of the

appliance during operation.

 Since deposits can built up over a period of time please

clean the rollers periodically after use by inserting a

folded A4 sheet of paper into the feeding slot of the

laminator (folded edge ﬁrst). The paper will come out

with any residue present. Repeat several times to clean the

roller.

 Never clean with scouring powders or hard implements.

 Wipe clean with a soft cloth.

SUGGESTED USES

Photographs Legal documents

Recipe cards Letters

Membership cards Point of sale

Fishing license Luggage tags

Certiﬁcates Homemade bookmarks

TECHNICAL DATA

Voltage 240V ,50Hz -----------------------------

Power --------------------- ------- Max. 360W

Current ----------------------------- 1 A .5

Film thickness -150 micron ---------------------- 80

Max. document size A4 size ---------------

Warm up time Approx.4- min ------------------- 6

Laminating speed Approx.32cm/min ------------------

Max. document thickness 4 ----------- 0. mm

POUCH SPECIFICATIONS

1. Plea e s make sure that enough margin (3-9 mm) is left

between the item to be laminated and the edge of the

pouch.

2. Do not trim the pouch prior to laminating.

3. Please ensure that good quality pouches of the speciﬁed

thickness (stated above) are used, as this will reduce the

risk of jamming and prolong the life of the laminator.

---------- SAVE THESE INSTRUCTIONS --------

Product specificaties

Merk:	Aurora
Categorie:	Lamineersysteem
Model:	LM4221H
Soort bediening:	Hefboom
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	1700 g
Breedte:	383 mm
Diepte:	136 mm
Hoogte:	85 mm
Gewicht verpakking:	1920 g
Breedte verpakking:	425 mm
Diepte verpakking:	119 mm
Hoogte verpakking:	170 mm
Soort:	Warme lamineermachine
Stroom:	1.5 A
Indicatielampje:	Ja
Gebruiksklaar-indicatielampje:	Ja
Aantal temperatuurinstellingen:	2
Aantal rollers:	2
Opwarmtijd:	6 min
Handvat(en):	Ja
AC-ingangsspanning:	240 V
AC-ingangsfrequentie:	50 Hz
Stroomverbruik (typisch):	360 W
Formaat:	A4
Voorverwarmingstijd:	6 min
Lamineersnelheid:	300 mm/min
Maximale lamineerbreedte:	235 mm
Maximale dikte document:	0.4 mm
Lamineersysteem:	Hoes
Minimale hoesdikte:	80 µm
Maximale hoesdikte:	150 µm