Audiovox RP5130 Handleiding

Audiovox Mp3 speler RP5130

Lees hieronder de 📖 handleiding in het Nederlandse voor Audiovox RP5130 (1 pagina's) in de categorie Mp3 speler. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

4. Press to conﬁ rm your

selection and exit setting.

• If ONE is selected, the player

will stop after the selected ﬁ le

is played. If ALL is selected,

the player will stop after all

ﬁ les in a folder are played.

Tones

You can activate this feature so

that beep sound can be heard

whenever you press on any key

except during playback and

recording.

1. Press and hold for MENU

about 2 seconds and then

release the button. The ﬁ rst

menu item, DICT CONFor

ﬂ ashes on display.

2. Press MENU again repeatedly

until BEEP ﬂ ashes on display.

3. Press or to / VOLUME +/–

set beep sound ON/OFF.

4. Press to conﬁ rm your

selection and exit setting.

Speed

You can adjust the playback speed.

1. Press to start playback of a

selected ﬁ le.

2. During playback, press MENU

once, SPEED shows on display.

General controls

WARNING: TO PREVENT FIRE OR ELECTRICAL

SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

Limited warranty (US)

What your warranty covers:

• Defects in materials or

workmanship.

For how long after your purchase:

• One year from date of

purchase.

• The warranty period for

rental units begins with the

ﬁ rst rental or 45 days from

date of shipment to the rental

ﬁ rm, whichever comes ﬁ rst.

What we will do:

• Provide you with a new, or at

our option, a refurbished unit.

The exchange unit is under

warranty for the remainder

of the original product’s

warranty period.

• Proof of purchase in the form

of a bill of sale or receipted

invoice which is evidence

that the product is within

the warranty period must be

presented to obtain warranty

service. For rental ﬁ rms, proof

of ﬁ rst rental is also required.

How to make a warranty claim:

• Properly pack your unit.

Include any cables, etc., which

were originally provided with

the product. We recommend

using the original carton and

packing materials.

• Include evidence of purchase

date such as the bill of sale.

Also print your name and

address and a description of

the defect. Send via standard

UPS or its equivalent to:

Thomson Inc.

Product Exchange Center

11721 B Alameda Avenue

Socorro, Texas 79927

• Insure your shipment for loss

or damage. Thomson accepts

no liability in case of damage

or loss en route to Thomson.

• Pay any charges billed to you

by the Exchange Center for

service not covered by the

warranty.

• A new or refurbished unit

will be shipped to you freight

prepaid.

What your warranty does not

cover:

• Customer instruction. (Your

Owner’s Manual provides

information regarding

operating Instructions and

user controls. For additional

information, ask your dealer.)

• Installation and set-up service

adjustments.

• Batteries.

• Damage from misuse or

neglect.

• Products which have been

modiﬁ ed or incorporated into

other products.

• Products purchased or serviced

outside the USA.

• Acts of nature, such as but

not limited to lightning

damage.

Product Registration:

• Please complete and mail

the Product registration Card

packed with your unit. It will

make it easier to contact you

should it ever be necessary.

The return of the card is

not required for warranty

coverage.

Limitation of Warranty:

• THE WARRANTY STATED

ABOVE IS THE ONLY

WARRANTY APPLICABLE TO

THIS PRODUCT. ALL OTHER

WARRANTIES, EXPRESS OR

IMPLIED (INCLUDING ALL

IMPLIED WARRANTIES OF

MERCHANTABILITY OR

FITNESS FOR A PARTICULAR

PURPOSE) ARE HEREBY

DISCLAIMED. NO VERBAL

OR WRITTEN INFORMATION

GIVEN BY THOMSON INC.,

ITS AGENTS OR EMPLOYEES

SHALL CREATE A GUARANTY

OR IN ANY WAY INCREASE

THE SCOPE OF THIS

WARRANTY.

• REPAIR OR REPLACEMENT

AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE

REMEDY OF THE CONSUMER.

THOMSON INC. SHALL NOT

BE LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL

DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT

OR ARISING OUT OF ANY

BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY ON THIS

PRODUCT. THIS DISCLAIMER

FCC information

This device complies with Part

15 of the FCC Rules. Operation

is subject to the following two

conditions: (1) This device may not

cause harmful interference, and

(2) this device must accept any

interference received, including

interference that may cause unde-

sired operation.

This equipment has been tested

and found to comply with the

limits for a Class B digital device,

pursuant to Part 15 of FCC Rules.

These limits are designed to

provide reasonable protection

against harmful interference in

a residential installation. This

equipment generates, uses, and

can radiate radio frequency

energy and, if not installed

and used in accordance with

the instructions, may cause

harmful interference to radio

communications.

However, there is no guarantee

that interference will not occur

in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be deter-

mined by turning the equipment

off and on, the user is encouraged

to try to correct the interference

For your records

In the event that service should be

required, you may need the model

number and the serial number. In

the space below, record the date

and place of purchase and the

serial number:

Model No.:

Date of Purchase:

Place of Purchase:

Serial No.:

by one or more of the following

measures:

• Reorient or relocate the

receiving antenna.

• Increase the separation

between the equipment and

receiver.

• Connect the equipment into

an outlet on a circuit different

from that to which the

receiver is connected.

• Consult the dealer or

an experienced radio/TV

technician for help.

Changes or modiﬁ cations not

expressly approved by the party

responsible for compliance could

void the user’s authority to oper-

ate the equipment.

Service information

This product should be serviced

only by those specially trained in

appropriate servicing techniques.

For instructions on how to obtain

service, refer to the warranty

included in this user manual.

user manual

manual de usuario

EN/E

It is important to read this instruction prior to using your new product for the ﬁ rst time.

Es importante leer este manual antes de usar por vez primera su equipo.

RP5130

v2.0 (EN/E)

RCA

DTA800A

Equipment tested for

compliance as a

complete unit

RCA

RP5130

This Class B digital apparatus com-

plies with Canadian ICES-003.

Cet appareil numérique de la class B

est conforme à la norme du NMB-003

du Canada.

The descriptions and characteristics given

in this document are given as a general

indication and not as a guarantee. In

order to provide the highest quality

product possible, we reserve the right to

make any improvement or modiﬁ cation

without prior notice. The English version

serves as the ﬁ nal reference on all prod-

ucts and operational details should any

discrepancies arise in other languages.

Maintenance

Clean the unit with a soft cloth, or

a damp chamois leather. Never use

solvents.

Precautions for the unit

• Do not use the unit

immediately after

transportation from a cold

place to a warm place;

condensation problem may be

resulted.

• Avoid shock to the unit

especially during recording.

Recorded data can be

damaged.

• Do not store the unit

near ﬁ re, places with high

temperature or places with

direct sunlight.

• Do not operate or store unit

in places with frequent static

electricity or electrical noise

(e.g. speaker, TV set).

• Clean the unit with a soft

cloth or a damp chamois

leather. Never use solvents.

• The unit must only be opened

by qualiﬁ ed personnel.

• Do not expose this appliance

to rain or moisture.

Important battery

precautions

• Any battery may present

a risk of ﬁ re, explosion, or

chemical burn if abused. Do

not try to charge a battery

that is not intended to be

recharged, do not incinerate,

and do not puncture.

• Non-rechargeable batteries,

such as alkaline batteries, may

leak if left in your product

for a long period of time.

Remove the batteries from

the product if you are not

going to use it for a month or

more.

• If your product uses more

than one battery, do not mix

types and make sure they

are inserted correctly. Mixing

types or inserting incorrectly

may cause them to leak.

• Discard any leaky or deformed

battery immediately. They

may cause skin burns or other

personal injury.

• Please help to protect the

environment by recycling

or disposing of batteries

according to federal, state,

and local regulations.

Power Supply

• (battery power) 2 x “AAA”

ESD Remark: In case of misfunc-

tion due to electrostatic discharge

just reset the product (discon-

nect and reconnect of the power

source may be required) to resume

normal operation.

Before you begin

Unpacking your player

You should have the following:

• one voice recorder

• one USB cable

• one user manual

• one quick start guide

• 2 AAA batteries

Installing batteries

This player can be operated by 2

“AAA” batteries (included).

1. Slide the battery compartment

door to open.

2. Insert the two supplied

“AAA” batteries with

polarities matching

indications.

3. Replace the battery

compartment door.

Refer to the battery level indica-

tor on display for batteries level.

Replace with new batteries when

the indicator is empty.

Auto power shut down

The player will be automatically

turned off if left idle for three

minutes.

Using earphones and

external microphone

• When earphones are

connected, sound output from

speaker will be muted.

• When external microphone

is connected, no record

can be made from built-in

microphone.

Player on/off

Press and hold to turn on the

player. Press and hold to turn off

the player.

Keys lock

To avoid accidental key activation,

slide the key lock selector toward

the lock icon ( ) to lock the keys.

Reverse the step to unlock the

keys.

16 17 18

1. Voice recording folder (1-6)

2. File selected

3. Total number of ﬁ les in a

folder

4. Playback in progress

5. Recording in progress

6. Playback speed

7. Total remain time for

recording

8. Music folder

9. Battery level indicator

Display

10. Key lock function activated

11. Time, date, record time

12. Bookmark

13. Recording conditions

14. Automatic voice recording

activated

15. Area for display messages

(refer to the next section)

16. Playback mode: play one or

play all

17. Recording qualities

18. Key tone is activated

ALL

APPEND

CUT-E

CUT-S

DELETE

<M> FULL

<B> FULL

MM/DD

12 HOUR

24 HOUR

TIME

INSERT

INTRO

OFF

SEN MID

TONE

NO TONE

VOL 15

YEAR

LOCKED

FORMAT

SPEED

WAIT...

001%

PAUSE

LOBATT

DEL ALL

DEL 01

Select all (Introductory Playback & Erasing All Files)

Appendix (Adding Appendix)

Cut End (Cutting)

Cut Start (Cutting)

Delete (Erasing Selected File)

Memory full

Bookmark full

Month / day entry mode

12 hour time display mode

24 hour time display mode

Time entry mode

Insertion (Inserting New Segments)

Introduction (Introductory Playback)

Off (Automatic Voice Recording)

On (Automatic Voice Recording)

Sensitivity Level (AVR)

Beeping sound on (Setting Beep Sound)

No beeping sound (Setting Beep Sound)

Volume (Setting Volume)

Year (Setting Year)

Key locked

Format the memory

Speed of playback

Unit is busy

Formatting is in progress

Playback is paused

Battery level is low

Delete all ﬁ les in a folder

Delete the selected ﬁ le (e.g. ﬁ le 01)

Display messages

They show at the bottom of the display during operation. Refer to the

below for their meanings:

Setting day and time

With day and time set, you can

always read on the display the re-

cording date and time of your re-

corded messages. Normal record-

ing is still possible without setting.

However, no correct recording

date and time can be referred to

your recorded messages.

Follow the steps below for setting

day and time:

1. Press to turn on the player.

2. Press and hold

MENU for about

2 seconds and

then release the

button. The ﬁ rst

menu item, DICT

or CONF ﬂ ashes on display.

3. Press MENU again repeatedly

until YEAR shows.

• If day and time have not been

set previously, the player goes

to step 3 automatically after

turn on.

Basic operations

Select folder

1. Press MENU

repeatedly to

select a speciﬁ c

folder (1, 2, 3,

4, 5, 6 or ) for

browsing. Default

is folder 1.

2. Press to exit to

stop mode in the

desired folder.

• Folders 1-6 are for storing

voice recordings. Folder is

for storing mp3 ﬁ les.

Select ﬁ le

To select a speciﬁ c ﬁ le for play-

back:

1. Select the folder you need.

2. Press or to select the ﬁ le

you want. If the ﬁ le you want

is in the current folder, you

can press or to select it

directly in both stop and play

modes.

Normal playback

1. Select a folder and a ﬁ le.

2. Press to start playback.

3. Press to pause playback,

press again to resume.

4. Press to adjust VOLUME +/–

listening volume.

5. Press and hold or to

make quick search within a

ﬁ le.

6. Press or once to skip

one ﬁ le forward or backward.

7. Press to stop playback.

• “ALL” is displayed if

you are at the ﬁ rst ﬁ le

and press or at the

last ﬁ le and press . See

IntroScan for more details.

• You can ﬁ nd the ﬁ les

transferred from the

computer in the folder.

See “Connecting to

computer” for details of

ﬁ le transfer.

Press MENU

Exit time setting

mode

Creating a bookmark

This feature allows you to cre-

ate an interception point in

the recorded message for quick

reference.

1. During playback, press

once to set a bookmark, the

bookmark icon ﬂ ashes on the

display.

• The month and date

information is displayed,

followed immediately by the

counters for the bookmarks.

2. You can create multiple

bookmarks until “<B> FULL”

is displayed.

Skipping to a bookmark

You can skip to a bookmark any-

time during playback.

1. During playback, press

to go to the bookmark (if

available).

2. Press or to select

different bookmarks of the

ﬁ le.

Bookmark

Deleting bookmarks

1. Press repeatedly to MENU

select a folder (1-6).

2. Press or to select a ﬁ le.

3. When playback is stopped,

press and hold for 2

seconds to delete ALL

bookmarks in the ﬁ le.

current

bookmark

total

number of

bookmarks

• You can create up

to 10 bookmarks

in a ﬁ le. When the

maximum limit is reached,

“<B> FULL” will be shown.

• If there are bookmarks in

the currently playing ﬁ le,

pressing or will go

through the bookmarks

ﬁ rst before skipping to the

previous or next ﬁ le.

Recording

Setting recording mode

You can select between two

recording modes – manual record-

ing and AVR (automatic voice

recording).

Manual Recording

1. While playback is stopped,

select a destination folder

(1-6) by pressing MENU

repeatedly.

2. Press to start recording. REC

(recording time will be

displayed once you press REC)

3. To pause recording, press REC

once, press again to resume

recording.

4. To stop recording, press .

AVR (Automatic Voice

Recording)

This feature allows the player to

sense sound and to record only

when you are speaking into the

microphone. When dictation stops

for about three seconds, recording

will stop and then start again

automatically when you resume

dictation.

1. Press repeatedly to MENU

select a destination folder

(1-6).

2. Press and hold for MENU

about 2 seconds and then

release the button. The ﬁ rst

menu item, DICT CONFor

ﬂ ashes on display.

3. Press MENU again repeatedly

until AVR ﬂ ashes on display.

4. Press / or

VOLUME +/– to

select between

AVR on and AVR

off.

5. Press to conﬁ rm

your selection and exit

setting.

6. Press to enter AVR mode.REC

7. During AVR

recording, adjust

the sensitivity of

the microphone

by pressing

VOLUME, SEN

with AVR sensitivity level

will show on display (e.g.

increase sensitivity level when

recording source is far from

the player or the recording

environment is quiet).

8. Start dictation. Recording

starts automatically.

9. Press to end AVR recording.

• Repeat step 2-3 and select

AVR OFF for de-selection.

AVR

• During recording, the

recording indicator

lights. When in AVR

standby mode or when

recording is paused, the

recording indicator ﬂ ashes.

• You can record up to 99

ﬁ les in one folder, not

exceeding 594 ﬁ les in total.

When the maximum limit is

reached, “<F> FULL” will be

shown.

• The ﬁ rst syllable or two

may be lost when you

start recording because

this ‘sound’ is used to turn

on the AVR feature. It is

a good practice to make

some ‘sounds’ or say a short

word to activate the AVR

before you begin actual

dictation.

• To view the remaining

time and other recording

information, press and hold

during recording.

Setting recording quality

You can select among four

recording qualities. Default is .HQ

Deﬁ nition

• LP (Long Play) – allows

about 140 hours recording.

• SP (Standard Play) – allows

about 70 hours recording.

• – allows HQ (High Quality)

about 35 hours recording.

• SHQ (Super High Quality)

– allows about 17 hours

recording.

1. Press and hold for MENU

about 2 seconds and then

release the button. The ﬁ rst

menu item, DICT CONFor

ﬂ ashes on display.

2. Press MENU

again repeatedly

until , LP SP, HQ

or ﬂ SHQ ashes

on display.

3. Select among LP,

SP, HQ and SHQ by pressing

/ / . or VOLUME + –

4. Press to conﬁ rm your

selection and exit setting.

Setting recording

condition

You can select between two

recording conditions. Default is

DICT.

Deﬁ nition

• – in a CONF (Conference)

more open area and recording

source is far from the player.

• – in a more DICT (Dictation)

enclosed area and recording

source is close to the player.

1. Press and hold

MENU for about

2 seconds and

then release the

button. The ﬁ rst

menu item, DICT

or CONF ﬂ ashes on display.

2. Select recording condition by

pressing / or VOLUME

+ –/ .

3. Press to conﬁ rm your

selection and exit setting.

DICT

For conferences, to

obtain optimum

recording quality,

place the recorder with the

microphone freely exposed

to the sound source as close

as convenient. A built-in

automatic recording level

control will set the optimum

record level during manual

recording. Avoid recording

near unwanted noise sources,

such as air conditioners or fans.

Erasing ﬁ les

Erasing selected ﬁ le

To delete a ﬁ le:

1. Press repeatedly to MENU

select a folder (1-6 or ).

2. Press or to select a ﬁ le.

3. Press once and ERASE

DEL 01 (or the currently

selected ﬁ le number) will ﬂ ash

on the display.

4. Press and hold for ERASE

three seconds to conﬁ rm

deleting (or press to cancel

erasing ﬁ le).

File numbers that come

after erased one will be

moved forward by one

automatically.

Advanced operations

IntroScan

This feature allows playback of

the ﬁ rst three seconds of each ﬁ le

in a folder.

1. Press MENU

repeatedly to

select a folder

(1-6).

2. Press or

until ALL shows

on display

3. Press to start

introductory

playback, INTRO

shows on display.

4. Press to start playing

current ﬁ le. Press to exit

IntroScan sooner.

Play one/all

You can choose to play a speciﬁ c

ﬁ le or all ﬁ les in a folder.

1. Press and hold for MENU

about 2 seconds and then

release the button. The ﬁ rst

menu item, DICT CONFor

ﬂ ashes on display.

2. Press MENU again repeatedly

until orONE ALL ﬂ ashes on

display.

3. Press / / or VOLUME + – to

select between ONE and ALL.

3. Press /

or VOLUME

+ – / to select

between FAST,

SLOW and no

speed indication

(normal speed).

4. Press to conﬁ rm and start

playback at the selected

speed.

Format

(Caution! All data inside the

memory will be erased)

You can format the internal

memory when needed. (e.g. com-

patability problem, etc.)

The procedures are as follows:

1. Turn on the

player.

2. Press ERASE,

DEL 01 (or the

currently selected

ﬁ le number)

will ﬂ ash on the

display.

3. Press and hold

REC for three

seconds, FORMAT

will ﬂ ash on the display.

Editing

CAUTION

• The edit function does not

operate when battery power

is too low.

• Make sure play all ﬁ les is

not selected. Inserting new

segments, adding appendix

and cutting cannot be

performed when play all ﬁ les

is selected.

• After editing a message,

WAIT will be displayed. Do

not power off the player until

WAIT disappears. Otherwise,

the memory which is

rearranging could not be read

or released until the player is

formatted.

Insert

You can insert new segments into

a ﬁ le without erasing previously

recorded content.

1. Press to start playback of a

selected ﬁ le.

2. Press or to scan to the

point that you want to insert

new segment.

3. Press MENU

twice, INSERT

will be shown on

display. Press REC

Append

You can add appendix (e.g.

reminder, supplementary informa-

tion) to the end of the ﬁ le.

1. Press to start playback of a

selected ﬁ le.

2. Press MENU

three times,

APPEND shows

on display. Press

REC within three

seconds to start

recording appendix.

3. Press to stop recording.

• After the memory

rearrangement completed,

the player will go to playback

stop mode.

Cut

You can erase unwanted parts

from your recording.

1. Press to start playback of

the ﬁ le with the unwanted

part.

2. Press to ERASE

mark the start

of the unwanted

part, CUT-S shows

on display.

3. Press to ERASE

mark the end of

the unwanted

part, CUT-E shows

on display.

4. Press ERASE

again to conﬁ rm cutting (or

press to cancel)

• will show on display.WAIT

• When the memory

rearrangement is completed,

the player will continue the

playback.

• Inserting new

segments, adding

appendix and

cutting will only update

the recorded time length,

without changing recording

time and date.

• All bookmarks will be

deleted after inserting new

segments, adding appendix

or cutting is performed.

Computer system

requirements

• PC with Windows VistaTM or

Windows® XP (Service Pack 1

or higher) or Windows® 2000

(Service Pack 3 or higher)

• USB port 1.1 or 2.0

• Installed sound card

Connecting to computer

You can transfer ﬁ les with your

computer via USB connection.

1. Connect the USB cable

provided to the player’s USB

jack and connect the other

end to your computer’s USB

port.

2. “PCLINK” shows on the

player’s display. The player

appears as a removable drive

in your computer.

• Data transfer is

possible even if no

batteries are installed

in the player.

• Do not disconnect the USB

connection during ﬁ les

transfer.

• On some operating system,

a message warning about

“Removing a USB device

without stopping it...”

might appear, you can press

OK to safely ignore it.

Connecting to computer Disconnecting from computer

After you have copied ﬁ les to

or from the player, you can

disconnect the player from the

computer.

1. Click the icon from the

System Tray and select

“Unplug or Eject hardware”.

Select the drive corresponding

to your player.

2. The “Stop a Hardware player”

screen will appear. Select the

player to be stopped again

for conﬁ rmation and click OK.

3. Now you can disconnect the

player from the computer.

If you want to go back to

USB mode for ﬁ le transfer

at this stage, you need to

unplug and connect the

player to the PC again.

Player doesn’t turn on

• Check that batteries are

properly inserted and not

exhausted.

• Make sure battery

compartment door is properly

closed.

• Make sure LOCK function is

not activated.

Cannot record

• Make sure LOCK function is

nots activated.

• Make sure memory is not full.

• You have recorded 99 ﬁ les

in one folder. Try record in a

new folder.

• You may have formatted

the player with incorrect ﬁ le

system (e.g. FAT32). Refer to

section ‘Format’ and format

the player again.

Incorrect recording date and

time during playback

• You may have not set

the date and time before

recording. Refer to section

‘Time Setting’.

No sound from speaker during

playback

• Make sure volume is not set

to 0.

• Headphones should not be

connected.

Cannot edit

• Make sure LOCK function is

not activated.

Cannot activate the player

after pressing on keys

• Remove the batteries to reset

the player.

Recordable time becomes

shorter

• You may have set the

recording quality to ‘High

Quality’, refer to section

‘Setting Recording Quality’.

Cannot perform playback

• Make sure you have selected

folder with recorded

messages.

• Make sure LOCK function is

not activated.

Cannot erase recorded ﬁ le(s)

• Make sure you follow each

step under section ‘Erasing

Selected File’ carefully.

Cannot stop recording when

AVR ON

• If AVR ON sensitivity is set to

HIGH, recording may not be

stopped in noisy environment.

Try setting the sensitivity to

LOW.

Cannot keep the saved setting

• If the batteries are removed,

saved settings may be

removed.

Cannot play mp3 ﬁ les in the

MUSIC folder

• Make sure the mp3 ﬁ les are

not stored in a folder. They

should be directly copied to

the MUSIC folder.

Troubleshooting tips

DICT

The key has two functions:MENU

Accessing folders

Press repeatedly to select MENU

folders.

Accessing player menu

1. Press and hold for MENU

about 2 seconds and then

release the button. The ﬁ rst

menu item, DICT CONFor

ﬂ ashes on display.

2. Then press MENU again

repeatedly to select the

following menu items:

Record conditions (DICT/CONF)

Record quality (LP/SP/HQ/SHQ)

AVR (on/off)

within three seconds to start

recording new segment.

4. Press to stop recording.

Using MENU key

DICT

Press repeatedlyMENU

Speed (FAST/SLOW)

Playback mode (one/all)

Tone (on/off)

Year

Day (month/day)

12/24 hour time

Time (hour/minute)

Exit player menu

3. Press / / or VOLUME + –

to make selections or adjust

values.

4. Press to conﬁ rm your

selection and exit setting.

Audiovox Electronics Corp

150 Marcus Blvd, Hauppauge, NY 11788

1-800-283-6503

www.rcaaudiovideo.com

Printed in China/Impreso en China

MM DD

Folder 1 > 2 > 3 > 4 > 5 > 6 >

4. Press and hold

ERASE, the

completed

percentage

will show on

the display,

formatting is in progress.

• After the formatting is

completed, the remain time

of the selected memory will

show on the display.

You may also format the player

when connected to a PC (by right-

clicking on the player’s drive name

or letter and select “Format” from

the menu). Make sure you select

FAT or FAT16 as the ﬁ le system.

Using your player as a ﬁ le

storage device

The player can function as a

detachable data storage device.

You can take along your favorite

pictures and documents wherever

you go. Simply cut-and-paste or

drag-and-drop ﬁ les to or from it

via USB connection, the player will

appear as a removable drive in

Windows

OF WARRANTIES AND LIMITED

WARRANTY ARE GOVERNED

BY THE LAWS OF THE STATE

OF INDIANA. EXCEPT TO

THE EXTENT PROHIBITED

BY APPLICABLE LAW, ANY

IMPLIED WARRANTY OF

MERCHANTABILITY OR

FITNESS FOR A PARTICULAR

PURPOSE ON THIS PRODUCT IS

LIMITED TO THE APPLICABLE

WARRANTY PERIOD SET

FORTH ABOVE.

How state law relates to this

warranty:

• Some states do not allow the

exclusion nor limitation of

incidental or consequential

damages, or limitations on

how long an implied warranty

lasts, so the above limitations

or exclusions may not apply to

you.

• This warranty gives you

speciﬁ c legal rights, and you

also may have other rights

that vary from state to state.

If you purchased your product

outside the USA:

• This warranty does not apply.

Contact your dealer for

warranty information.

Transfer ﬁ les via Windows

Explorer (drag and drop)

Your player is associated with a

drive letter. From Windows Ex-

plorer, highlight all the mp3 ﬁ les

(not folder) you want to transfer

to your player and drag them to

the folder named “MUSIC” in

the drive. Your mp3 ﬁ les can be

found in this folder in the player

once it is disconnected from the

computer.

Press and hold for about 2 MENU

seconds to access the player menu

Editing

Recording

4. When shows, press YEAR /

or to adjust VOLUME +/–

the value (default year: 2008)

and then press to MENU

conﬁ rm.

5. After year is set, you will then

be guided to set month, day,

12/24 hour display, hour and

minute. Follow the operations

in step 4 for settings.

1. Built-in microphone

2. Recording indicator

3. – creates bookmarks

4. MENU – press once to access

folders, press and hold to

access the player menu for

various settings

5. ERASE – erases ﬁ les

6. VOLUME +/– – adjusts

volume, selects / browses

in the player menu, adjusts

sensitivity during AVR

recording

7. REC – starts and pauses

recording

8. OFF – stops playback or

recording, turns off player

9. ON – turns on player, starts

or pauses playback

10. / FWD REW – skips /

searches backward or forward,

selects / browses in menu

11. Key lock selector

12. MIC – External microphone

jack

13. EAR – External earphones jack

14. USB jack

Turn off the player ﬁ rst

before replacing batteries.

If power interruption

exceeds 20 seconds, date and

time have to be set again.

Erasing all ﬁ les in a folder

To delete all ﬁ les in a speciﬁ c

folder:

1. Press repeatedly to MENU

select a folder (1-6).

2. While playback is stopped,

press repeatedly until ALL

appears on the display.

3. Press and will ERASE DEL ALL

ﬂ ash on the display.

4. Press and hold for ERASE

about three seconds, all ﬁ les

in the selected folder will be

erased completely (or press

to cancel erasing all ﬁ les).

/ or /VOLUME + –

To avoid malfunction, do

not change the names

of the default folders in

the player.

Product specificaties

Merk:	Audiovox
Categorie:	Mp3 speler
Model:	RP5130
Ondersteund audioformaat:	MP3
Ingebouwde luidsprekers:	Ja
FM-radio:	Nee
Ingebouwde microfoon:	Ja
Stemopname:	Ja
Batterij bijna leeg-indicatie:	Ja
Totale opslagcapaciteit:	0.512 GB
Type opslagmedium:	Flashgeheugen
Spraak opnametijd:	140 uur