Audiosonic CL-1482 Handleiding

Audiosonic Radio CL-1482

Lees hieronder de 📖 handleiding in het Nederlandse voor Audiosonic CL-1482 (29 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/29

Model No. CL-1482

INSTRUCTION MANUAL

GEBRUIKERSHANDLEIDING

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUAL DE INSTRUCCIONES

MANUAL DE INSTRUÇÕES

1. AM/FM BAND BUTTON

2. | / Y-M-D / DST BUTTON>>

3. SNOOZE / SLEEP BUTTON

4. ALARM SET BUTTON

5. ON / OFF BUTTON

6. / TEMP / °C/°F BUTTON|<<

7. ALARM 1 RADIO / BUZZ BUTTON

8. ALARM 2 RADIO / BUZZ BUTTON

9. MODE BUTTON

10. LED DISPLAY

11. RESET BUTTON

12. DISPLAY AUTO OFF / LOW / HIGH DIMMER

13. AC POWER CORD

14. TEMPERATURE SENSOR (IN DOOR)

15. FM ANTENNA

16. INFRARED SENSOR

17. LINE IN JACK

18. VOLUME KNOB

19. TUNE KNOB

20. SPEAKER

21. RATING LABEL

22. BATTERY DOOR

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up

system, it requires a 3V CR2032 ﬂat lithium battery (not included). Insert the battery in the battery

compartment, making certain that the positive and negative (+ and -) battery terminals are attached to the

corresponding terminals on the plate in the battery compartment. If an AC power failure occurs, the clock

automatically switches to the battery power supply, the clock and timer memory continue running. When

the AC power resumes, the clock switches back to AC again.

1. TIME AND CALENDAR SETTING

A. Setting Time and Calendar – press mode set button (9) in normal mode and keep depress over 2

seconds to enter time set mode, after enter the setting mode, press mode set button (9) to change

the mode cycle as follows.

Normal Year Month Day 12/24 H RTC Hour RTC Min Normal

Action (during data adjustment):

-Press |<< / TEMP / °C / °F button (6) to adjust data backward

-Press >>| / Y-M-D / DST button (2) to adjust data forward

-Keep depress |<< or >>| button for 2 seconds to enable auto forward.

B. Setting Alarm 1 and Alarm 2 – press alarm set button (4) during normal mode and keep depress

over 2 seconds to enter alarm set mode, after enter the setting mode, press alarm set button (4) to

change the mode cycle as follows :

Normal AL 1 Hour AL 1 Min AL 1 weekend Alarm AL 2Hour AL 2 Min AL 2 weekend alarm

Normal

ENGLISH

Action (during data adjustment):

-Press / TEMP / °C / °F button (6) to adjust data backward|<<

-Press | / Y-M-D / DST button (2) to adjust data backward>>

-Keep depress or button for 2 seconds to enable auto forward.|<< >>|

2. SETTING ALARM OUTPUT AND ALARM ON/OFF

A. Change the alarm output

Press AL 1 (7) / AL 2 (8) button to Music position to select wake up by Radio, set to Buzzer

position to select wake up by Buzzer, set to Alarm oﬀ position to disable all alarm.

Select the Display Auto Off / Low / High dimmer switch (12) to the Auto off Mode. Alarm wake up the

time display is auto turn on.

3. ALARM DURATION AND SNOOZE FUNCTION

Alarm Duration – Buzzer alarm or radio alarm will continue output for 30 minutes if no key press, then

it will stop automatically and wait for same alarm time on next day.

Action for Snooze:

-During alarming, press Snooze / Sleep button (3) will enable snooze function, Buzzer alarm or Radio

alarm will stop.

-Snooze interval is 9 minute (not include second oﬀset)

-Snooze will continue unless press On / Off button (5) to alarm off of Buzzer alarm or Radio alarm stop

automatically after 30 minutes.

-Select the Display Auto Off / Low / High dimmer switch (12) to the auto off mode. During alarming

display auto turn on. Press Snooze / Sleep button (3) will enable snooze function, buzzer alarm or

radio / display will stop & off.

4. CHANGE DISPLAY CONTENT

A. Press >>| / Y-M-D / DST button (2) during normal can switch to displayYEAR /MONTH / DAY, after

5 seconds timeout and return back to display time.

B. Press |<< / TEMP / °C/ °F button (6) during normal can switch to display in door temperature, after

5 second timeout and return back to display time.

C. Press |<< / TEMP / °C / °F button during normal can switch to display in door temperature and hold

for 3 seconds change temperature unit °C / °F

5. SLEEP FUNCTION

During radio on mode, press Snooze / Sleep button (3) to turn on Sleep mode, the sleep time will keep

flashing by 5 second, within 5 seconds and press Sleep button can change the duration from 90 min –

15 min. Press On/Off button (5) to cancel sleep function.

DST – Daylight saving time

Press >>| / Y-M-D / DST button and hold for 3 seconds to toggle on and off DST function. (For one hour

summer & winter time difference)

RADIO OPERATION

-Press the On / Off button (5) to turn radio on.

-Select AM/FM band press the AM/FM band button (1).

-Select the station using the Tune knob (19).

-Turn the volume knob (18) to adjust volume as required.

-Press the On / Off button (5) to turn radio off.

Note:

-The AM band use an internal directional aerial, rotate the radio for best reception.

-Ensure that the FM antenna (15) is completely unrolled and extended for best FM reception.

RESET

-The reset button (11) is located on the back of unit. Use a ballpoint pen to press it whenever you

change the batteries, or unit is not performing as expected. This will return all settings to default value,

and you will lose any stored data (alarm and clock settings).

Product specificaties

Merk:	Audiosonic
Categorie:	Radio
Model:	CL-1482
Kleur van het product:	Zwart, zilver
Ingebouwd display:	Ja
Gewicht:	550 g
Gewicht verpakking:	650 g
Geïntegreerde klok:	Ja
Beeldschermdiagonaal:	1.2 "
Afmetingen verpakking (BxDxH):	136 x 98 x 208 mm
Waarschuwingssignaal:	Ja
Alarm functie:	Ja
Snooze functie:	Ja
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	- W
Soort tuner:	Analoog
Wekker:	Ja
Backlight-kleur:	Blauw
AUX ingang:	Ja
Ondersteunde frequentiebanden:	FM, MW
Radio:	Klok
Apple docking-compatibiliteit:	Niet ondersteund
PLL-synthesizer:	Nee