AudioControl TXJTD8 Handleiding

AudioControl Subwoofer TXJTD8

Lees hieronder de 📖 handleiding in het Nederlandse voor AudioControl TXJTD8 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
Dual 8” Under Seat Subwoofer Enclosure
FOR JEEP GLADIATOR JT
INSTALLATION GUIDE
NOTE! Read this installation guide thoroughly before disassembling or modifying
the vehicle. Installation of this product requires technical skill, experience and
specialized tools. If in doubt, it’s recommended to have it professionally installed
by an authorized or Dealer.Stinger Audio Control
TXJTD8
A video installation guide is available at:
https://stingerelectronics.com/collections/vehicle-specic-subwoofer-enclosures/products/txjtd8
2
INSTALLATION NOTES
INCLUDED HARDWARE
RECOMMENDED TOOLS
M6 FLANGED HEX HEAD BOLT (2)
2 1.0 5mm / in Length ENCLOSURE MOUNTING BRACKETS (2) QUICK-PLUG SPEAKER CONNECTOR (1)
10mm Wrench
Wire Strippers
Optional:
Small Pick / Flat Screwdriver
T25 Torx
Nylon Panel Tool
Wire Crimper
Solder/Solder Gun
The TXJTD8 is designed to mount under the rear seat of the Jeep Gladiator. The factory under seat storage will
need to be removed and two of the factory bolts will be used to mount the enclosure.
For JT models equipped with a factory subwoofer, there is no need to remove the subwoofer, but unplugging
the factory subwoofer is recommended. See Step 6.
Some installation steps are more easily completed with a second person.
Speaker wire is required.
Final enclosure impedance: 2ohms.
Recommended amplier rating: 400-1,000 watts @ 2ohms.
Recommended Subsonic Filter Setting: 31 Hz.
1 2 3
3
INSTALLATION
Step 2
Step 1
With the rear seat bottoms folded up,
remove the four 10mm (Torx #40) bolts
securing the storage wall to the oor.
Remove the storage wall from the vehicle.
On both sides of the speaker enclo-
sure, loosen the 10mm bolts halfway
and remove the mounting brackets
by passing the bolt head through the
“keyhole” on the brackets.
Leave the 10mm bolts partially
installed in the rear of the enclosure.
NOTE: On models equipped with a locking
storage bin, the bottom of the storage bin
has rubber mats that need to be removed
to access the four mounting bolts.

Product specificaties

Merk: AudioControl
Categorie: Subwoofer
Model: TXJTD8

Heb je hulp nodig?

Als je hulp nodig hebt met AudioControl TXJTD8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer AudioControl

AudioControl

AudioControl TXJTD8 Handleiding

18 Juni 2024
AudioControl

AudioControl TXJWB12 Handleiding

16 Mei 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Deaf Bonce

Deaf Bonce Apocalypse ASA-4000.1 Handleiding

20 November 2024
Deaf Bonce

Deaf Bonce Apocalypse Atom 2000 PRO Handleiding

20 November 2024
JBL

JBL PSW-D115 Handleiding

20 November 2024
JBL

JBL PSW-D110 Handleiding

20 November 2024
JBL

JBL PSW-D112 Handleiding

20 November 2024
JBL

JBL Power P1224 Handleiding

20 November 2024
JBL

JBL Power P1220D II Handleiding

20 November 2024
JBL

JBL Power P1242 Handleiding

20 November 2024
JBL

JBL Power P1220 II Handleiding

20 November 2024
JBL

JBL Power P1020 II Handleiding

20 November 2024