Audio-Technica ATW-1101 Handleiding

Audio-Technica Microfoon ATW-1101

Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica ATW-1101 (8 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

System 10

Digital Wireless System

Installation and Operation

ATW-1101

UniPak® Transmitter System

ATW-1101/G

Guitar System

ATW-1101/H

Headworn Microphone System

ATW-1101/H92

Miniature Headworn Microphone System

ATW-1101/H92-TH

Miniature (beige) Headworn Microphone System

ATW-1101/L

Lavalier Microphone System

ATW-1102

Handheld Microphone System

System 10 Installation and Operation

Notice to individuals with implanted cardiac pacemakers or AICD

devices: Any source of RF (radio frequency) energy may interfere with

normal functioning of the implanted device. All wireless microphones

have low-power transmitters (less than 0.05 watts output) which are

unlikely to cause difculty, especially if they are at least a few inches

away. However, since a “body-pack” mic transmitter typically is placed

against the body, we suggest attaching it at the belt, rather than in

a shirt pocket where it may be immediately adjacent to the medical

device. Note also that any medical-device disruption will cease when

the RF transmitting source is turned off. Please contact your physician

or medical-device provider if you have any questions, or experience any

problems with the use of this or any other RF equipment.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

9. Unplug this apparatus during lightning storms or when unused for

long periods of time.

10. Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

Thank you for choosing an Audio-Technica professional wireless

system. You have joined thousands of other satised customers who

have chosen our products because of their quality, performance and

reliability. This wireless microphone system is the successful result of

years of design and manufacturing experience.

Audio-Technica’s System 10 is an eight-channel digital wireless system

designed to provide rock-solid performance along with easy setup

and clear, natural sound quality. Featuring stackable, contemporary

styling, System 10 is available in handheld, headworn, guitar, lavalier

and body-pack congurations. Operating in the 2.4 GHz range, far from

TV and DTV interference, System 10 offers extremely easy operation

and instantaneous channel selection. Up to eight channels may be

used together without any frequency coordination problems or group

selection issues.

System 10 wireless ensures clear communications by providing three

levels of diversity assurance: frequency, time, and space. Frequency

Diversity sends the signal on two dynamically allocated frequencies

for interference-free communication. Time Diversity sends the signal

in multiple time slots to maximize immunity to multipath interference.

Finally, Space Diversity uses two antennas on each transmitter and

receiver to maximize signal integrity.

Each System 10 professional digital wireless system includes a

receiver and either a body-pack transmitter or a handheld microphone/

transmitter. ATW-1101 UniPak® body-pack transmitter systems include

models pre-packaged with either an AT-GcW guitar cable (/G), a

PRO 8HEcW headworn microphone (/H), a PRO 92cW headworn

microphone (/H92), a PRO 92cW-TH headworn microphone (/H92-

TH), or an MT830cW lavalier mic (/L) for particular applications. All A-T

Wireless Essentials® microphones and cables, available separately, are

pre-terminated for use with any ATW-1101 system.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.

CERTIFICATION: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC

RULES. THIS DEVICE COMPLIES WITH INDUSTRY CANADA LICENSE-

EXEMPT RSS STANDARD(S). OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE

HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

Cet appareil est conforme à la/aux norme(s) RSS exempte(s) de licence

d’Industrie Canada. Son fonctionnement est soumis aux deux conditions

suivantes : (1) cet appareil ne doit pas causer d’interférence et (2)

cet appareil doit accepter toutes les interférences, y compris celles

susceptibles de provoquer un fonctionnement non souhaité.

WARNING: Changes or modications not expressly approved in writing

by Audio-Technica may void the user’s authority to operate

this equipment.

RF Exposure Statement: This transmitter must not be co-located or

operated in conjunction with any other antenna or transmitter.

This receiver must be positioned at least 20 cm away from any persons

when in use.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la classe B est conforme a la norme

NMB-003 du Canada.

CAUTION! Electrical shock can result from removal of the

receiver cover. Refer servicing to qualied service personnel. No

userserviceable parts inside. Do not expose to rain or moisture. The

circuits inside the receiver and transmitter have been precisely adjusted

for optimum performance and compliance with federal regulations. Do

not attempt to open the receiver or transmitter. To do so will void the

warranty, and may cause improper operation.

System 10 Installation and Operation

Because System 10 packaging is designed to hold all versions

of the system, some compartments in the carton may be intentionally

left empty.

The ATW-R1100 receiver includes a switching power supply that

automatically adapts to changes in mains voltage.

The versatile ATW-T1001 UniPak body-pack transmitter has both

a high-impedance input for instruments, and a low-impedance input

with bias connection for use with dynamic and electret condenser

microphones. The ATW-T1002 handheld transmitter features a

unidirectional dynamic microphone element.

Both the body-pack and handheld transmitters use internal AA batteries

and have Power/Mute switches and input Trim (level) adjustments.

Receiver Installation

Location

For best operation the receiver should be at least 3' (1 m) above the

ground and at least 3' (1 m) away from a wall or metal surface to

minimize reections. Keep the receiver antennas away from noise

sources such as other digital equipment, microwave ovens, as well as

away from large metal objects. Keep System 10 receiver 30' (9 m)

away from wireless access points. In multi-channel systems, position

receivers at least 3' (1 m) apart and keep operating transmitters at least

6' (2 m) from the receivers to help assure maximum RF performance.

VOLUME UNBALANCED

BAL ANCED

DC 12V IN

500mA

MIN. MAX.

1 1

4 6

3 5

1 2 3 4 5

Output Connection

There are two audio outputs on the back panel: balanced XLR-type

output and unbalanced ¼" TRS phone jack. Use shielded audio cable for

the connection between the receiver and the mixer. If the input of the

mixer is a ¼" jack, connect a cable from the ¼" unbalanced audio output

on the back of the receiver housing to the mixer. If the input of the

mixer is an XLR-type input, connect a cable from the balanced XLR-type

audio output on the back panel to the mixer.

Power Connection

Connect the DC plug on the included AC power adapter to the DC

power input on the back of the receiver. Secure the cord over the cord

hook on the back of the receiver, to keep the plug from being detached

by an accidental tug on the cord. Then plug the adapter into a standard

120 Volt 60 Hz AC power outlet.

(Note that the receiver has no power Off/On switch. The receiver will be

energized whenever the power adapter is connected and plugged into

the AC outlet. Unplug the power supply from the AC outlet when the

system is not in use — both for safety, and to conserve energy.)

Antennas

Rotate the permanently attached antennas in the shape of a “V” (both

45° from vertical) for best reception.

ATW-R1100 Receiver Controls and Functions

Figure A — Front Panel Controls and Functions

1. Antennas: Position the antennas as shown.

2. System ID Select Switch: Press to cycle through System ID

numbers. (System ID is an identical number assigned to a paired

receiver and transmitter for identication purposes.)

3. System ID Display: Shows System ID number.

4. Pairing Switch: Press to initiate pairing.

5. AF Peak Indicator: Only lights when audio distortion is present at

maximum modulaton. Not affected by position of Volume control.

6. Pair Indicator: Glows green to indicate presence of paired

transmitter. Also blinks green to indicate pairing mode activated.

Figure B — Rear Panel Controls and Functions

1. AF Level (Volume) Control: Adjusts audio output level of both AF

Output jacks; maximum output is fully clockwise.

2. Unbalanced Audio Output Jack: ¼" phone jack. Can be connected to

an unbalanced aux-level input of a mixer, guitar amp or tape recorder.

3. Balanced Audio Output Jack: XLRM-type connector. A standard

2-conductor shielded cable can be used to connect the receiver

output to a balanced microphone-level input on a mixer or

integrated amplier.

4. Power Input Jack: Connect the DC plug from the included in-line

AC adapter.

5. Cord Hook: Loop the cord around the cord hook to keep the DC

plug from pulling out accidentally.

Product specificaties

Merk:	Audio-Technica
Categorie:	Microfoon
Model:	ATW-1101
Ondersteund aantal accu's/batterijen:	2
Levensduur accu/batterij:	7 uur
Antennas quantity:	2
Frequentie:	2400 MHz
Totale harmonische vervorming (THD):	0.05 procent
Receiver afmetingen (B x D x H):	190 x 128.5 x 46.2 mm
XLR out:	1
Ontvanger type:	Rekgemonteerde ontvanger
Type batterij:	AA
Frequentierespons microfoon:	20 - 20000 Hz
Ontvangerdisplay:	Ja
Zendretype:	Bodypackzender
Receiver gewicht:	290 g
Transmitter afmetingen (WxDxH):	70.2 x 24.9 x 107 mm
Aantal ontvangers inbegrepen:	1
Aantal zenders inbegrepen:	1
Zenderdisplay:	Ja