Audio-Technica ATND971a Handleiding

Audio-Technica Microfoon ATND971a

Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica ATND971a (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
ATND971
Cardioid Condenser Boundary Microphone with Dante™ Network Output
Features
Description
The ATND971 is a Dante-enabled, wide-range condenser microphone with a cardioid polar pattern. It is designed
for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other
demanding sound pickup applications.
The microphone features a touch-sensitive capacitive-type user switch with integral red/green LED status indicator.
In Local mode the user switch mutes and unmutes the microphone. It can be set to toggle between live and muted
audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio
while the switch is pressed (press to mute). In Remote mode the user switch can be used to trigger functions on
compatible Dante-enabled devices, such as a video camera’s pan/tilt or a room’s lighting preset. While in Remote
mode the microphone’s audio output is controlled remotely.
The audio output of the ATND971 can be routed using Audinate’s Dante Controller, which is available for download
at the Audinate website (www.audinate.com). The site also provides Dante routing and software instructions.
The microphone is equipped with UniGuard® RFI-shielding technology, which offers outstanding rejection of radio
frequency interference (RFI).
The microphone’s cardioid polar pattern provides a 120° angle of acceptance (cardioid in hemisphere above
mounting surface). Additional interchangeable elements with omnidirectional (360°) and hypercardioid (100°) pickup
patterns are available.
Operation and Maintenance
The ATND971 is powered by network PoE. The electronics in the microphone take up
to 30 seconds to stabilize after power is applied.
The microphone should be placed on a at, unobstructed mounting surface, with the
front of the microphone facing the sound source. The sound source should not be
below, or higher than 60° above, the plane of the mounting surface.
The microphone features a touch-sensitive user switch with integral red/green LED status indicator. The user switch
has four Local settings that can be chosen by pressing the button beneath “SWITCH FUNCTION” and “DEFAULT
MODE.” The default setting is TOGGLE ON/OFF. Press the button once to change setting to TOGGLE ON/OFF. In both
settings the user switch will toggle between mute and unmute – the only difference is the status of the audio when
the microphone is turned on. Press the button a second time to select MOM. ON (momentary on), wherein the audio
will be on only while the user switch is being pressed (press to talk). Press the button a third time to select MOM.
OFF (momentary off), wherein the audio will be muted while the user switch is being pressed. Press the button a
fourth time to cycle the setting back to the default. The “SWITCH FUNCTION” and “DEFAULT MODE” LEDs will
illuminate red or green to indicate the current setting.
Turn the low-cut UniSteep® lter on and off by pressing the button beneath “LOW CUT” on the bottom of the
microphone. The lter is off by default. The LED above “LOW CUT” illuminates red when the lter is off, green when
it is on.
There are three input gain levels that can be selected: +30 dB (for loudest voices), +40 dB and +50 dB (for softest
voices). To adjust the gain level, press the button beneath “GAIN” on the bottom of the microphone. Pressing the
button once changes the level from +30 dB to +40 dB, pressing it again changes the level to +50 dB and pressing a
third time returns the level to +30 dB. The LED above “GAIN” illuminates green for +30 dB, orange for +40 dB and
red for +50 dB.
To lock the Local settings, press and hold the button beneath “LOCK” on the bottom of the microphone. Press and
hold again to unlock settings. The LED above “LOCK” will illuminate red when locked and remain unlit when not
locked. If a setting button is pressed while the lock is on, the LOCK LED will blink.
All LEDs on the bottom of the microphone will turn off seven seconds after the last button is pressed. Pressing any
button will cause the LEDs to relight.
Specifications
Element Fixed-charge back plate,
permanently polarized condenser
Polar pattern Half-cardioid (cardioid in hemisphere
above mounting surface)
Frequency response 30-20,000 Hz
Low frequency roll-off 80 Hz, 18 dB/octave
Maximum input sound level 117 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise radio 68 dB, 1 kHz at 1 Pa
Power requirements PoE IEEE802.3af standard
Power consumption 1.5W
Switches Local Mode:
Touch-sensitive capacitive type user switch function:
toggle (mute on power up), toggle (talk on power up),
momentary on, momentary off;
Low-cut lter:at, roll-off; Gain: +30 dB, +40 dB, +50 dB
Remote Mode:
Low-cut and Gain via third-party software*
Weight 393 g
Dimensions 110.0 mm (L), 89.5 mm (W), 35.8 mm (H)
Output connector RJ45
Dante network Physical level: standard Ethernet
Connector: single RJ45
Cable quality: Shielded CAT5 or CAT6 recommended
Transmission speed: 100 Mbps
Optional interchangeable elements UE-O omnidirectional (360°)
UE-H hypercardioid (100°)
Accessory furnished Soft protective pouch
frequency response: 30–20,000 Hz polar pattern
Frequency in Hertz
LEGEND
Response in dB
12" or more on axis SCALE IS 5 DECIBELS PER DIVISION
FORM No. ATGC-L0326-15-E
Machida • Tokyo • Japan
To return the microphone to its default Local settings, press the GAIN and LOW CUT buttons simultaneously.
The microphone can also be controlled remotely via third-party software.* When this software is used it will
override local control, causing the audio to remain on and the red/green LED status indicator, low-cut lter and input
gain level to be controlled remotely. In Remote mode the microphone’s user switch can be programmed to trigger
functions on compatible Dante-enabled devices. When in remote mode the Remote LED is illuminated.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43° C for extended periods.
Extremely high humidity should also be avoided.
User Switch Settings and Functions in Local Mode
CONTROL
User Switch Mode SWITCH FUNCTION
LED Color
DEFAULT MODE
LED Color
Default Toggle
(mute on power up)
Green Red
1st Press Toggle
(talk on power up)
Green Green
2nd Press Press to Talk Red Red
3rd Press Press to Mute Red Green
Roll-off
110 mm
DANTE/PoE
89.5 mm
35.8 mm
network microphones
FORM No. ATGC-L0326-15-C
Machida • Tokyo • Japan
ATND971
心形指向性界面电容话筒带Dante™网络输出
特性
使用以太网线直接连接至网络中 - 无需再外加及焊接音频线
整合了用户开关，可在本地模式中控制讲话/静音；亦可在远程模式
中操控 设备
本地或远程控制增益、 高通滤波器和LED指示灯的状态红/
绿显示
以网络的 供电
整个可扩展性的 系统，具有512双向音频通道
电容式触控感应的用户开关
- 射频干扰(RFI)屏敝技术，提供杰出的防止射频干扰能力
- 高通滤波器，提供了一个高效能的高通滤波，把低频噪
声作出衰减而无损话音的收音质量
可选配适合的收音头更换配合实际的应用，收音角度可由100°至
360°
以压模铸造的坚固外壳及话筒底部的防滑矽泡棉，可减低桌面震动
对话筒的影响
说明
ATND971是一枚具有Dante功能，宽阔频宽的电容式心形指向性界面话筒，设计于平面放
置应用，提供高质量收音、会议、远程教学等高要求的收音应用。
话筒设有电容感应轻触开关，并设置有以红/绿色显示L ED指示灯。在本地模式下，用户可
开关话筒以静音或讲话操作，当中可以设置讲话和静音间的反覆切换 (锁存式开/关)之间的
实时和静 音 音频切换 ； 或预设静音 而只在按下 时 讲话(点 动讲话)， 或预设讲话 而只在按下
时静音(点动静音)。在远程模式中，轻触开关可用来控制兼容Dante功能的设备，例如视频
摄像机的拍摄目标位置或房间的照明预置功能。同时话筒的音频输出亦可在远程模式中作
出远端控制。
ATND971的音频输出可以 使用Audinate公司的Dante控制 器作路线布局，可 在Audinate网站
(www.audinate.com)下载有关软件。该网站还提供Dante的路由控制和软件说明。
话筒配 备有UniGuard® 射频 干扰( RFI )屏敝技 术，提 供杰出 的防止射频干扰 能力， 避免收音
时受到如手提电话等的干扰。
话筒的心形指向性提供120°的收音角度(平面上的心形半圆)，并可选配其他适合的收音头
配合实际的应用，包括全指向性360°、超心形指向性100°。
操作与维护
ATND971 需要由网络的PoE供电。话筒的电子部份需要在上电30秒后
才达到稳定的状态。
话筒应放置在平面上，及没有阻碍物的环境使用。音源应在话筒的
前方发声，理想的收音角度应在平面至60°高度之内。
话筒配置有一个整合式的轻触感 应用户开关，和红/绿色LED状 态指示灯。此用 户开关设有
四组设置选择，可以通过按下底部的按钮选择“开关功能(SWITCH FUNCTION)”和“默认模
式(DEFAULT MODE)”。在预设状态下为“锁存开关模式 (TOGGLE ON/OFF)”，按下一次可按
钮来更改更默认模式，两种模式同样是设置用户开关在静音和 讲话间的反 覆切换 - 唯一的
区别只是在话筒上电时的音频状态。再按下第二次，会设置为“点动开启模式(MOM.ON)”,
话 筒 正 常 时为静音 ， 只 在 按下用 户 开 关 时才开启 讲 话 ( 按 下 讲话)。再 按 下 第 三次，会 设
置为“ 点动关闭模式(MOM.OFF)”,话筒 正常时 为开启， 只在按 下用户开 关时才会关闭静 音
(按下静音)。当再按下第四次时，会恢复到周期设置的预设状态。在“开关功能(SWITCH
FUNCTION)”和“默认模式(DEFAULT MODE)”的指示灯会亮起红色或绿色来显示当前设置。
话筒配置有UniSteep® 高通过滤器开闭，可按下话筒底部的“LOW CUT”按钮选择。该过滤
器预设是关闭的，即“LOW CUT”的LED会亮起红色；而在选择于开启状态时，LED会亮起
绿色显示。
另 外 ， 话 筒 亦 配 置 有 三 种 输 入 增 益 选 择 ， 亦 即 是 + 3 0 d B ( 在 大 音 量 讲 话 ) 、 + 4 0 d B 和
+50dB (用于柔弱的音量)。要调整增益电平，可按下话筒底部的“GAIN”按钮。按下一次
可把级别从 +30 dB 改至 +40dB，再按第二次会把增益改变至 +50dB，如再按第三次会把
增 益 电平 返 回 + 3 0 d B 。 上述 “GAIN”的 L E D 会分 别 以 绿 色( + 3 0 d B ) ，橙 色 ( + 4 0 d B )和 红 色
(+50dB)显示。
如要锁定本地设置，可持续按下话筒底部的“LOCK”按钮，再次持续按下可解除锁定。当
锁定 时，“LOCK”的 LED会显示红色；而在未锁定时会保持熄灭。当锁定时 如果按下其他
按钮，LOCK指示灯会闪烁显示。
在最后一之按下按钮后，话筒底部的所有LED将会保持7秒后关闭，直至再按下任何按钮
后，LED指示灯才重新亮起。
技术指标
收音头 固定充电背板, 电型电容式静
指向特性 半心形单指向性
频率响应
30-20,000 Hz
高通滤波
80 Hz, 18 dB/octave
最大承受声压
117 dB
声压级
, 1 kHz
于
1% T.H.D.
讯噪比
68 dB, 1 kHz
于
1 Pa
供电
PoE IEEE802.3af
标准
耗电量
1.5
瓦
开关
本地模式:
电容式轻触感应的开关方式：锁存(上电静音)、
锁存(上电讲话)、点动开启、点动关闭;
滤波器：平直、高通滤波;
增益：
+30 dB, +40 dB, +50 dB
远程模式：
通过第三方软件作高通滤波和增益控制*
重量
393
克
外形尺寸 长
110.0 mm,
宽
89.5 mm,
高
35.8 mm
输出端子
RJ45
Dante
网络
物理层：标准以太网
接口：R
J45
网线质量：建议使用屏蔽式
CAT5
或
CAT6
网线
传输速度：
100 Mbps
可转换收音头
UE-O
全方向性
(360°)
UE-H
超心形指向
(100°)
标准配置 软质保护袋
频率响应
: 30–20,000 Hz
指向特性
频率 (赫兹)
电平
响应电平 (dB)
平直 声压曲线
1 刻度为 5dB
高通滤波
110 mm
DANTE/PoE
89.5 mm
35.8 mm
network microphones
把话筒的本地模式恢复回默认预设状态，可同时按下“GAIN”和“LOW CUT”按钮即可。
话筒也可以通过第三方软件进行远程控制。*在使用这些软件时，软件将会无视本地控制的
设定，从而使音频维持开启，而LED指示灯的红/绿状态、高通滤波器和输入增益均由远程
控制所取代。在远程模式时，话筒上的用户开关可以被编程为控制其他兼容Dante设备的
操作。在操作于远程模式时，远程(Remote)LED将亮起显示。
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱，应避免将话筒留在日晒的地方
或长时间置于温度超过43°C的地方，而极高湿度也应避免。
本地模式时用户开关的设定与功能
控制
用户开关模式 开关功能的LED颜色
(SWITCH FUNCTION)
默认模式的LED颜色
(DEFAULT MODE)
预设 锁存式
(上电静音)
绿色 红色
第一次按下 锁存式
(上电讲话)
绿色 绿色
第二次按下 点动开启 红色 红色
第三次按下 点动关闭 红色 绿色

Product specificaties

Merk: Audio-Technica
Categorie: Microfoon
Model: ATND971a

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica ATND971a stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Microfoon Audio-Technica

Audio-Technica

Audio-Technica ATR7700 Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATR7500 Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATR3500 Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATR3700 Handleiding

6 December 2024
Audio-Technica

Audio-Technica AT8703 Handleiding

6 December 2024
Audio-Technica

Audio-Technica AT2040USB Handleiding

6 December 2024
Audio-Technica

Audio-Technica PRO35 Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATM75cW Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATS99 Handleiding

6 December 2024
Audio-Technica

Audio-Technica PRO41 Handleiding

6 December 2024

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Sennheiser

Sennheiser A 9000 Handleiding

20 December 2024
Sony

Sony DWT-P30 Handleiding

18 December 2024
BOYA

BOYA BY-M1000 Pro Handleiding

18 December 2024
PSC

PSC PowerStar RF Handleiding

17 December 2024
PSC

PSC RF Multi SMA Handleiding

17 December 2024
Power Dynamics

Power Dynamics PD210 Handleiding

15 December 2024
Power Dynamics

Power Dynamics PD220 Handleiding

15 December 2024
Behringer

Behringer Go Cam Handleiding

14 December 2024
Behringer

Behringer HM50 Handleiding

14 December 2024
Behringer

Behringer BC444 Handleiding

14 December 2024