Audio-Technica AT846/C Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT846/C (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
CARDIOID CONDENSER BOUNDARY MICROPHONE
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Optional Accessories:
AT8506 four-channel 48V phantom
power supply (AC powered).
AT8801/EU single-channel 48V
phantom power supply (AC pow-
ered).
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
FORM No. ATGC-L0182-11-E
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Unidirectional (Cardioid in hemisphere
above mounting surface)
FREQUENCY RESPONSE 60-20,000 Hz
OPEN CIRCUIT SENSITIVITY -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
SIGNAL-TO-NOISE RATIO >66 dB, 1 kHz at 1Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
WEIGHT 48 g
DIMENSIONS 30.0 mm - diameter,
64.6 mm - length
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED One pair isolators
Th e AT 8 4 6/C is a wid e - r ange
c o n d e n s e r m i c r o p h o n e w i t h
a unidi rectio nal po lar pattern .
It is d e s ign e d fo r unob trusiv e
table, ceiling or panel-mounted
applications for high-quality sound
reinforcement, teleconferencing,
professional recording, television
a n d o t h e r d e m a n d i n g s o u n d
pickup applications.
T h e A T 8 4 6 / C i s e q u i p p e d
w i t h U niGu a r d ® R FI - sh i e l d i n g
t e c h n o l o g y , w h i c h o f f e r s
out s tan d i ng r e j ecti o n of r a dio
frequency interference (RFI). The
microphone is RoHS compliant
free from all substances specified
in the EU directive on hazardous
substances.
The microphone should be placed on a at, unobstructed mounting
surface. The small diameter capsule near the boundary eliminates
phase distortion and delivers clear, high-output performance.
The microphone requires 11V to 52V phantom power for operation.
The microphone is enclosed in a heavy-duty die-cast case and
protected by a two-layer steel mesh grille. The low-profile housing
has a low-reflectance black finish. Isolators are included with the
microphone for optional mechanical isolation from the mounting
surface.
Output is low impedance balanced. The balanced signal appears
across Pins 2 and 3, while the ground (shield) connection is Pin 1.
Output is phased so that positive acoustic pressure produces positive
voltage at Pin 2 in accordance with industry convention.
To mount the AT846/C in a ceiling or table top without the isolators,
a 20.5 mm diameter hole is required. To mount the AT846/C with the
isolators, a 23.5 mm hole is required. Place the isolators on either
side of the hole to achieve mechanical isolation from the mounting
surface. The small cardioid circle on the AT846/C bezel indicates the
"front" of the microphone.
The microphone shall be a xed-charge condenser designed for use
in table, ceiling or panel-mount boundary applications. It shall have
a frequency response of 60 Hz to 20,000 Hz and an unidirectional
(cardioid in a hemisphereabove the mounting surface boundary)
polar pattern. It shall incorporate a self-contained power module
and require 11V to 52V DC phantom power to operate. It shall offer
outstanding rejection of radio frequency interference (RFI). It shall be
capable of handling sound input levels up to 134 dB. Nominal open
circuit output voltage shall be 14.1 mV at 1 kHz, 1 Pascal. Output
shall be low impedance balanced (100 ohms) from an integral 3-pin
XLRM-type connector.
The microphone shall have a maximum diameter of 30.0 mm and an
overall length of 64.6 mm. Weight shall be 48 grams. The microphone
shall be housed in an all-metal case with a two-layer steel mesh
grille. Finish shall be low reflectance black. A small cardioid circle
on the bezel shall indicate the "front" of the microphone. Resilient
isolators shall be provided for reduction of mechanical noise transfer
from the mounting panel.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43 C for extended periods. Extremely high °
humidity should also be avoided.
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向特性
频率特性
声压曲线
1刻度5 dB
频率
频率 (赫兹)
电平 平直
响应电平 (dB)
FORM No. ATGC-L0182-11-C
Machida Tokyo Japan
AT 8 4 6 / C 是 一 枚 阔 频 宽 的 电
容式心形指向性话筒,小型的
设计,特别适合安装在不显眼
的桌面、天花、仪表面板上使
用,可应用于专业录音、电视
广播、视像会议等高要求的收
AT 8 4 6 / C 配备有 U n i G u a r d®
- 射 频 干 扰 ( R F I ) 屏 敝 技 术 , 提
供杰出的防止射频干扰能力,
避免收音时受到如手提电话等
的 干 扰 。 话 筒 亦 符 合 R o H S
格,在构造上不含有欧盟禁用
话筒应安装在一个平直及无阻碍物的平面上,接近平面的
小型收音头可消除相位失真,和提供清晰及高输出的表
内置的供电模组使用直流 11 V 5 2 V 幻象供电工作 话筒
外壳使用耐用的合金铸造及双层保护网设计,并涂上黑色
不反光涂层。话筒配有防震绝缘胶,以防止安装面上的震
低阻抗的平衡音频输出,音频信号以卡农公头输出端子的
23号针脚输出,而1号针脚则为地线()连接。输出
2
话筒如不需要安装防震胶时,可在天花板或桌面上开出直
2 0 . 5 m m 的圆孔安装;如需要连同防震胶一起安装时,
则需要开出直径 2 3 . 5 m m的圆孔,而防震胶需要前后两端
同时安装于平面上。收音头上的小圆点标记,指示出收音
话 筒 是 固 定 充 电 背 板 收 音 头 设 计 , 安 装 在 桌 面 、 天 花 、 仪
表面板上使用,频率响应为6 0 H z 2 0,0 0 0 H z的单指向性
收 音 (平面上的心形半圆),内置使用直流11 V 5 2V 幻 象
供电的供电模组 防止射频干扰 ( R F I ) 的能力,可提供达
1 3 4 d B 的 声 压 输 入 电 平 一 般 开 路 输 出 电 压 为1 4 . 1 m V
输出接线端为标准的 XLRM-3 卡农公头,可连接到任何以
XLRF -3
3 0. 0 mm 6 4 .6 mm 48
话 筒 外 壳 为 全 金 属 结 构 及 双 层 保 护 网 设 计 , 表 面 涂 上 低 反
光 黑 色 涂 层 , 而 话 筒 收 音 头 的 小 圆 点 为 收 音 指 向 的 正 前
方。话筒配有防震绝缘胶,以防止安装面上的震动噪声。
把话筒暴露于高温中可能导致输出电平逐渐及永久性减
弱,应避免将话筒留在日晒的地方或长时间置于温度超过
43°C 湿 免 。
选择配件:
AT8506 四通通48V幻象供电器 (交流供电)
AT8801/EU 单通道48V幻象供电器 (交流供电)
技术指标
收音头 固定充电背板,
静电型电容式
指向特性 单指向性 (平面上的心形半圆)
频率响应 60-20,000 Hz
开通灵敏度 -37 dB (14.1 mV)
1V 1 Pa
输出阻抗 100
最大承受声压 134 dB 声压, 1 kHz 1% T.H.D.
讯噪比 >66 dB, 1 kHz
1Pa
幻象供电 直流 11-52V DC, 耗电 2 mA 典型
重量 48
外形尺寸 30.0 mm - 直径,
64.6 mm -
输出连接器 内置式3针卡农公头
附属品 1
对防震绝缘胶


Product specificaties

Merk: Audio-Technica
Categorie: Microfoon
Model: AT846/C

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT846/C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Audio-Technica

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Sony

Sony ECM-322BMP Handleiding

22 November 2024
Sony

Sony ECM-S1 Handleiding

22 November 2024
Sony

Sony ECM-W3S Handleiding

22 November 2024
Sony

Sony ECM-W3 Handleiding

22 November 2024
Sony

Sony ECM-M1 Handleiding

22 November 2024
Sony

Sony XLR-H1 Handleiding

22 November 2024
Sony

Sony ECM-678 Handleiding

22 November 2024
Sony

Sony ECM-XYST1M Handleiding

22 November 2024