Audio-Technica AT8022 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT8022 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
X/Y STEREO MICROPHONE
- Designed for broadcast and professional recording
- Unique coincident capsule conguration produces accurate stereo
image in smaller housing
- Ideal for use with hand-held digital recording devices
- Compact, lightweight design is perfect for video camera-mount use as
well as for stereo eld recording, interviews and home recording
- Switchable low-frequency roll-off
- Operates on battery or phantom power
The AT8022 requires 11- 52V DC phantom power, or a 1.5V AA battery
for operation. A battery need not be in place for phantom power operation.
(Use battery power only when connecting the AT8022 to an unbalanced
input.)
Battery installation: Unscrew the lower section of the microphone body
to reveal the battery compartment. Insert a fresh 1.5V AA battery in the
handle compartment (+” end up), then reassemble the microphone.
Alkaline batteries are recommended for longest life. Remove the
battery during long-term storage. Battery switch must be “on” for battery
operation. Turn off when not in use to preserve battery life. Battery switch
has no effect on phantom power operation.
Output for each stereo channel is low impedance (Lo-Z) balanced. The
balanced signals appear across Pins 2 and 3 for the left channel, Pins
4 and 5 for the right channel. Pin 1 is ground (shield) for both channels.
Output is “Pins 2 and 4 hot” - positive acoustic pressure produces positive
voltage at Pins 2 and 4.
Two cables are provided: one balanced cable (5-pin XLRF-type to two
3-pin XLRM-type) and one unbalanced cable (5-pin XLRF-type to 3.5 mm
TRS). NOTE: Use battery power only when connecting the AT8022 to
an unbalanced input.
Locating the AT8022 nearer the sound source enhances the width of the
stereo image, while decreasing room ambience. Conversely, as the mic
position moves away from the sound source, a narrower left/right stereo
image results and more of the “room sound” is noted.
An integral 80 Hz high-pass filter provides easy switching from a flat
frequency response to a low-end roll-off. The roll-off position reduces
the pickup of low-frequency ambient noise (such as trafc, air-handling
systems, etc.), room reverberation and mechanically coupled vibrations.
The high sensitivity of the AT8022 assures useful output and an excellent
match to most inputs. However, the microphone's high output may
overload some sensitive electronic input stages under some conditions.
Many pre-amps and mixers include a mic pad or input attenuator control
to prevent overload.
The microphone is RoHS compliant–free from all substances specied in
the EU directive on hazardous substances.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43°C for extended periods. Extremely high humidity
should also be avoided.
FORM No. ATGC-L0139-08-E
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
CHANNEL BALANCE <2.5 dB
POLAR PATTERN X/Y Stereo
FREQUENCY RESPONSE 20-15,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY
(Phantom / Battery)
-38 dB (12.5 mV) re 1V at 1 Pa
-38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE (Phantom / Battery) 250 ohms / 300 ohms
MAXIMUM INPUT SOUND LEVEL
(Phantom / Battery)
128 dB / 120 dB SPL,
1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)
(Phantom / Battery)
109 dB / 101 dB,
1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIRMENTS 11 - 52V DC, 2 mA (each channel)
BATTERY TYPE 1.5V AA/UM3
BATTERY CURRENT / LIFE 0.7 mA / 700 hrs typical (alkaline)
SWITCHES Battery On/O; Flat, roll-off
WEIGHT (less cable and accessories) 247 g
DIMENSIONS 186.0 mm long,
47.6 mm head diameter,
21.0 mm maximum body diameter
OUTPUT CONNECTOR Integral 5-pin XLRM-type
CABLES
Balanced: 2.0m long, 8 conductor, vinyl-jacketed stereo cable with 5-pin
XLRF-type connector at microp hone end and two 3-pin XLRM-type
connectors at output end;
Unbalanced: 0.6m long stereo cable with 5-pin XLRF-type connector at
microphone end and 3.5mm TRS connector at output and.
ACCESSORIES FURNISHED
AT8405a stand clamp for "-27 threaded stands; windscreen; battery;
soft protective pouch
Roll-o
200 Hz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
200 Hz
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
LEFT RIGHT
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
1 kHz
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
LEFT RIGHT
8 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
8 kHz
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
LEFT RIGHT
10 dB
20k10k5k2k1k50020010050
频率特性
频率 (
赫兹)
电平 平直
响应电平 (dB)
FORM No. ATGC-L0139-08-C
X/Y
- 专为专业录音和广播采访的音频收音而设计
-
体声收音性能。
- 适合于手持式数字录音器材使用
-
像机上作立体声同步收音、采访和家庭录影。
-
- 可以使用电池或幻象供电工作
AT8 02 2 11 V 52 V 1. 5 V AA 使 用 至
作,当使用幻象电源时,可以不安装电池。 在使用非平衡连(
线使)
性 跟(
电池盒内的标记 ,放入一枚新的 电池 极向上 ,再) 1.5V AA ('+' )
旋回电池盖,关启供电开关便可工作。建议使用碱性电池,而
长时间不使用时,请把电池取出。在使用幻象电源时,供电开
关没有作用。
话筒的每通道输出端为低阻抗平衡输出,话筒音频信号最终以
卡农公头的23号针脚作左通道输出,4 5号针脚作右
1号针脚则为左右通道地线()接 输
24号针脚上。
提供了两组话筒接线,分别为平衡接线(5农母至两
3针卡农公头)及非平线(5针卡农母头连接3.5mm立体声插
)注意:在使用非平衡连线时,需安装电池使用。
请把 话筒放置于接近音源的位置,以减少回音混响和AT8022
提高立体声收音效果。远离音源时会收窄立体声音像和增加
内 置 高 通 滤 波 电 路 , 可 轻 易 由 平 直 的 频 率 响 应 , 开 启 为 于
80Hz
中低频噪声 (如外间汔车引擎声,空调系统的风声等),房间中
AT8022提供高灵敏度的收音效能,可确保能接收到最大的音
源。而在某些情况下,为避免发生超负载输入而出现破声的情
况,需要在话 和前置放大器之间加入电平衰减器。
筒 符Ro HS
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱,应
4C
湿Machida Tokyo Japan
技术指标
收音头 固定充电背板,
静电型电容式
通道平衡 <2.5 dB
指向特性 X/Y 立体声
频率响应 20-15,000 Hz
高通滤波 80 Hz, 12 dB/octave
开通灵敏度 (幻象供电)
(电池)
-38 dB (12.5 mV) /
-38 dB (12.5 mV) 1V 1 Pa
输出阻抗 (幻象供电/电池) 250 欧姆 / 300 欧姆
最大承受声压 (幻象供电/电池)128 dB / 120 dB 声压,
1 kHz 1% T.H.D.
动态范围 (典型) (幻象供电/电池) 109 dB / 101 dB, 1 kHz
于最高声压
讯噪比 75 dB, 1 kHz 1 Pa
电池种类 1.5V AA
5 号电池
耗电/电池寿命 0.7 mA / 700小时 (碱性电池)
幻像供电 直流 11 - 52V, 耗电 2mA 典型每通道
开关 电池开关;平直 / 高通滤波
重量 247 g
外形尺寸 186.0 mm ,
47.6 mm 头罩直径
21.0 mm 机身最大直径
输出连接器 内置 XLRM-5针卡农公头
连线
平衡接线:2.0 m 长,8芯线屏蔽式聚乙烯护套立体声电缆带 5
针卡农母头连
接话筒,及两路3针卡农公头于输出端。
非平衡接线:0.6 m 长,立体声电缆带 5针卡农母头连接话筒,及 3.5 mm
体声插头于输出端。
附属品
AT8405a ⅝"-27接头转轴式支架;防风罩;电池;保护软袋
高通滤波
200 Hz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
200 Hz
指向特性
声压曲线1刻度 5 dB
频率
收音头 收音头
8 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
8 kHz
指向特性
声压曲线
1刻度
5 dB
频率
左收音头 收音头
指向特性
声压曲线1刻度
5 dB
频率
左收音头 收音头


Product specificaties

Merk: Audio-Technica
Categorie: Microfoon
Model: AT8022

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT8022 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Audio-Technica

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon