Audibax Ground Sub 10T Handleiding

Audibax Speaker Ground Sub 10T

Lees hieronder de 📖 handleiding in het Nederlandse voor Audibax Ground Sub 10T (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Ground SUB10T
Please read the manual before using the product
USER´S
MANUAL
3
Ground SUB10T
SPECIFICATIONS
CARE AND MAINTENANCE
Make sure to turn all equipment off before cleaning. The cabinet only needs
occasional dusting. Please do not touch the drive units. Do not clean the
speaker with chemical solvents as this may damage the paint surface. Clean
with a dry cloth.
3.
MODEL
Ground SUB10T
Woofer
10''Polypropylene
Cone
RMS Power
150W
Frequency
Response(±3dB)
50Hz-300Hz
Nominal
Impedance
4
Sensitivity 86
IP Level
IP 65
Product
Dimension(mm)
310x420x420
(12.2"x16.5"x16.5")
1/4"
(6.35mm)
screws
Ground SUB10T USER´S
MANUAL
1 2
SAFETY INSTRUCTIONS
1. Please read the instructions carefully before installation and use. Keep the manual
safe for future reference.
2. When installing Ground SUB10T speaker outside do not submerge or place them in
direct contact with water (e.g., ponds, waterfalls, fountains).
3. Damage to the woofer may occur if the speaker is dropped or hit - resulting in no
sound or distorted sound.
4. Use only approved and certified wiring in your installation, do not stretch or place
the wire in contact with sharp objects.
5. Never overdrive your speakers to the point of distortion and always reduce volume
prior to switching input sources (e.g., FM to CD).
6. Prior to removing cables ensure all power to your amplifier and other components
is turned OFF.
7. Turn off the power to the speaker when unused for long periods of time.
PACKING LIST
subwoofer
subwoofer
user manual
security eyebolt
security eyebolt
wire nuts X2
wire nuts
Wire nuts for connecting wires
keyholes slots
keyholes slots
screws X2
INSTALLATION
Deck mount
1. Determine where you want to locate the subwoofer.
2. Measure the center-to-center distance between the key-hole slots and install two
mounting screws into the deck, leaving 1/4" of the screws exposed above the
surface.
3. Place the subwoofer onto the pan head screws and rotate the Ground SUB10T
clockwise so that the keyhole slots lock down onto the pan head screws.
Garden Placement
You may locate Ground SUB10T anywhere you can run speaker wire. If you place
your subwoofer in a garden bed, on grass, mulch or upon soft ground, we
recommend you place it on a paver or other hard surface and remove all gravel or
debris prior to installation. This will prevent plants, weeds, mulch or dirt from
building-up underneath the subwoofer, which must remain clear for optimum
performance and to prevent damage to driver.
Note: For anti-theft security and permanent placement the Ground SUB10T has a
built-in eyebolt that enables you to anchor it to its location.
1.
2.
Ground SUB10T
Por favor, lea el manual antes de usar el producto
MANUAL
DE USUARIO
3
Ground SUB10T
ESPECIFICACIONES
CUIDADO Y MANTENIMIENTO
Asegúrese de apagar todo el equipo antes de limpiarlo. El gabinete solo
necesita limpieza ocasional. No toque las unidades de accionamiento. No
limpie el altavoz con disolventes químicos, p3-ya que podría dañar la superficie
pintada. Limpiar con un paño seco.
3.
MODELO
Altavoz de graves
Potencia RMS
Respuesta de frecuencia (± 3dB)
50Hz-300Hz
Impedancia nominal
Sensibilidad
Nivel IP
Dimensión del producto (mm)
tornillos
1/4"
(6.35mm)


Product specificaties

Merk: Audibax
Categorie: Speaker
Model: Ground Sub 10T

Heb je hulp nodig?

Als je hulp nodig hebt met Audibax Ground Sub 10T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Audibax

Handleiding Speaker

Nieuwste handleidingen voor Speaker