Atlona AT-VSP-800 Handleiding

Atlona Spiegelreflexcamera AT-VSP-800

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-VSP-800 (12 pagina's) in de categorie Spiegelreflexcamera. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Installation Guide

AT-VSP-800-BL and AT-VSP-800-WH

Velocity System 8” Scheduling Touch Panel

AT-VSP-800-BL and AT-VSP-800-WH

The Atlona AT-VSP-800 is a Velocity System 8” scheduling touch panel. It features contemporary,

rened styling with 1280×800 native resolution, and a capacitive glass surface that supports

touch and gesture interactions. Bright LED lighting on the edge of the bezel is ideal for providing

a visual representation of room status in scheduling applications. This touch panel conveniently

installs into a wall or furniture via a one-gang US, UK, or EU opening. The VSP-800 features

Power over Ethernet (PoE), enabling a single network connection for data and power. Setting up

the touch panel is eortless as room scheduling and AV control GUIs are automatically uploaded

from the Velocity System hardware or software server gateway during system conguration.

1 x AT-VSP-800

1 x Metal 1-gang mounting plate

1 x Metal 2-gang US horizontal mounting plate

4 x Mounting screws

1 x Installation Guide

Package Contents

Operating Notes

• The Velocity 8” Scheduling Touch Panel (AT-VSP-800) must be on the same network as the

Velocity Gateway (AT-VGW-HW-3/10/20) or it will be unable to sync for scheduling.

• The AT-VTP-800 is PoE capable, to power the unit, simply plug it into a 802.3af compatible

network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)

can be used.

IMPORTANT: Velocity Gateway (AT-VGW-HW-3/10/20) must be set up before the AT-

VSP-800 is fully functional.

Installation Guide

AT-VSP-800-BL and AT-VSP-800-WH

Mounting Instructions

The AT-VSP-800 can be mounted to a 1 gang back plate.

UK back box:

1 Select the type of 1 gang back box to use and install into a wall.

2 Thread the Ethernet cable through the 1 gang box.

3 Install the included mounting plate into the 1 gang box.

a If using a UK back box, place the screws in the two inside mounting holes.

b If using a US back box, place the screws through the outside screw holes.

4 Loosen or remove the two screws located at the top and bottom of the unit.

5 Place the unit onto the metal back plate, the dual prongs inserting into the small opening on

the back of the unit.

6 Tighten/attach the screws at the top and bottom of the touch pad.

NOTE: Install using the region’s safety guidelines for electrical boxes.

NOTE: To avoid damage to the unit, do not overtighten the screws.

NOTE: For horizontal installation, turn

the unit and mounting plate on its side.

The same back box can be used.

Installation Guide

AT-VSP-800-BL and AT-VSP-800-WH

US back box:

1-gang Vertical installation

2-gang Horizontal installation

To install the touch panel in landscape orientation in a wall the US 2-gang installation

plate should be used. Use the 4 included screws to install the unit into the back box.

Product specificaties

Merk:	Atlona
Categorie:	Spiegelreflexcamera
Model:	AT-VSP-800
Kleur van het product:	Zwart
Gewicht:	150 g
Breedte:	133.24 mm
Diepte:	33.8 mm
Hoogte:	197.82 mm
Omgevingslichtsensor:	Ja
Beeldschermdiagonaal:	8 "
Resolutie:	1280 x 800 Pixels
Proximity sensor:	Ja
Montagewijze:	In-muur
Type stroombron:	Power over Ethernet (PoE)
Helderheid:	450 cd/m²
Ingebouwde luidsprekers:	Ja
Certificering:	CE, FCC, RoHS/WEEE
Ingebouwde microfoon:	Ja
Netwerkstandaard:	IEEE 802.3af
Touchscreen technologie:	Capacitief
Vermogen luidsprekers:	2 W