Atlona AT-VCC-IR-KIT Handleiding

Atlona Niet gecategoriseerd AT-VCC-IR-KIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-VCC-IR-KIT (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Installation Guide
AT-VCC-IR-KIT
1
IP to IR Command Converter for Velocity Control System
AT-VCC-IR-KIT
The Atlona AT-VCC-IR-KIT is an accessory for the Atlona Velocity™ Control System that provides
conversion from IP control commands to IR. This Velocity Control Converter is very compact
and can be placed anywhere a device requires IR control. The VCC-IR-KIT is remotely powered
through Power over Ethernet (PoE), or locally from a USB power source. The primary unit installs
onto any surface via a convenient mounting dock. A simple “click” locks it into place for a secure,
reliable installation. The IR adapter module includes three 3.5 mm ports for connecting the AT-
VCC-IR-EMT emitters. Each port is independently addressable, allowing discrete IR control of
three dierent AV devices.
1 x AT-VCC
1 x AT-VCC-IR
Package Contents
Operating Notes
• The Velocity Command Converter must be on the same network as the Velocity Gateway
(AT-VGW-250) or it will be unable to sync for control.
• The AT-VCC-IR-KIT is PoE, to power the unit, simply plug it into a PoE compatible network
switch. If the network switch is not PoE capable, a PoE injector or USB (purchased separately)
can be used.
• All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the
DHCP IP address reserved for each individual device.
IMPORTANT: Velocity Gateway (AT-VGW-250) must be set up before the AT-VCC-IR-KIT
is fully functional.
Installation Guide
AT-VCC-IR-KIT
2
2 3 41 5 6
1 IR Window
Use to learn IR commands from a device’s
IR remote control.
2 Ethernet
Connect an Ethernet cable from this
port to the same network as the Velocity
Gateway.
3 USB
Can be used to power the VCC when PoE
is unavailable. Requires 5V DC @ 250mA
(not supplied).
4 3.5mm Port
Connect to a VCC IR connector or
optional IR emitter - AT-VCC-IR-EMIT
(purchasable through atlona.com).
5 3.5mm Connector
Connect the 3.5mm connector to the
3.5mm port of the VCC.
6 3 x 3.5mm Ports
Connect up to three 3.5mm IR receivers to
the 3-3.5mm ports.
Panel Description
IP
The AT-VCC is set to DHCP by default. If the network does not support DHCP, it will
automatically set the AT-VCC to the static IP of after 30 seconds.
192.168.1.70
VHelp and webGUI
Velocity will nd the VCC when scan network is used, but if the VCC needs to be set up o site
rst, the software VHelp can be used.
1 Connect the IR tri-port or IR emitter into the 3.5mm port on the unit.
2 Connect the AT-VCC to a network switch (PoE is best if a PoE switch is not available, a
power injector or mini USB to USB cable may be used).
3 Download VHelp from the resource tab of https://atlona.com/product/AT-VCC-IR-KIT.
4 Unzip the le to the local PC
5 Double-click the VHelp executable to open the program. Vhelp will start discovery as soon
as the program is opened.
Installation Guide
AT-VCC-IR-KIT
3
6 Double click on the VCC (to determine the correct one, look on the bottom of the VCC for
the MAC address). The PC default browser will open to the AT-VCC webGUI.
7 Select Network Settings to open the IP conguration page.
8 Select the DHCP Enabled header, this will disable DHCP and allows IP settings to be edited.
10 Press the Save Changes button.
9 Type in the IP details to
match the network details
of the Gateway. e.g. If the
Velocity gateway is located at
the IP of 192.168.12.15, then
the VCC should be set to an
IP within the 192.168.12.XXX
range that has not already
been used.
11 Open any browser on the network and type in the IP address of Velocity.
12 Select the button from the top left corner and select .= Sites
NOTE: Connecting the VCC to Velocity can only be done once Velocity has been set
up. View the Velocity Manual for instructions.

Product specificaties

Merk: Atlona
Categorie: Niet gecategoriseerd
Model: AT-VCC-IR-KIT

Heb je hulp nodig?

Als je hulp nodig hebt met Atlona AT-VCC-IR-KIT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Atlona

Atlona

Atlona AT-PRO5-101-RX Handleiding

30 Januari 2025
Atlona

Atlona AT-VGA18A Handleiding

13 Januari 2025
Atlona

Atlona AT-VGA2401 Handleiding

13 Januari 2025
Atlona

Atlona AT-RGB0816 Handleiding

8 Januari 2025
Atlona

Atlona AT-RGB2416-A Handleiding

8 Januari 2025
Atlona

Atlona AT-HDCAT-8ED Handleiding

8 Januari 2025
Atlona

Atlona AT-VGA14A Handleiding

8 Januari 2025
Atlona

Atlona AT-DVID30SR Handleiding

8 Januari 2025
Atlona

Atlona AT-RGB3232 Handleiding

8 Januari 2025
Atlona

Atlona AT-RGB0808 Handleiding

8 Januari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

2hp

2hp Lo-Fi Handleiding

30 Januari 2025
Buchla & TipTop Audio

Buchla & TipTop Audio Model 259t Handleiding

30 Januari 2025
ADDAC System

ADDAC System ADDAC814 Handleiding

30 Januari 2025
Ecler

Ecler ETH232AD Handleiding

30 Januari 2025
Twisted Electrons

Twisted Electrons Crazy8 Beats Handleiding

30 Januari 2025
Twisted Electrons

Twisted Electrons Crazy8 Handleiding

30 Januari 2025
2hp

2hp Bell Handleiding

30 Januari 2025
2hp

2hp Trim Handleiding

30 Januari 2025
2hp

2hp Comb Handleiding

30 Januari 2025
2hp

2hp Rout Handleiding

30 Januari 2025